Analysis of Jet Behavior and Surface Fluctuations in the Meniscus of Fluid in a Physical Model of a Beam Blank Mold and CFD Modelling
- Organization:
- The Minerals, Metals and Materials Society
- Pages:
- 11
- File Size:
- 4054 KB
- Publication Date:
- Mar 1, 2017
Abstract
In this study,the influence of the immersion depth, casting speed on the flow characteristics in a beam blank mold with two tubular nozzles have been investigated using a physical model as well as CFD simulations.The results of CFD simulations were found to be consistent with the results of experiments in the physical model.The liquid jet spreads faster the flange region compared to the web region. This can lead to a non-uniform shell thickness along the cross section resulting in uneven solidification of the skin. The jet penetration depth ranged between 66 and 77 cm. The average intensity of meniscus fluctuation was 0.22 mm, and the maximum fluctuation was found to be 0.85 mm. Based on these results, the suggested optimum operating parameters for immersion depth and casting speed were 75 mm and maximum casting speed of 1 m/min.
Citation
APA: (2017) Analysis of Jet Behavior and Surface Fluctuations in the Meniscus of Fluid in a Physical Model of a Beam Blank Mold and CFD Modelling
MLA: Analysis of Jet Behavior and Surface Fluctuations in the Meniscus of Fluid in a Physical Model of a Beam Blank Mold and CFD Modelling. The Minerals, Metals and Materials Society, 2017.