Fire Data Analysis For All Metal/Nonmetal Mining Categories - Underground Metal/nonmetal And Stone Mine Fires

The National Institute for Occupational Safety and Health (NIOSH)
Maria I. De Rosa
Organization:
The National Institute for Occupational Safety and Health (NIOSH)
Pages:
16
File Size:
655 KB
Publication Date:
Jan 1, 2004

Abstract

Table 1 and figure 1 show the number of fires and fire injuries that occurred in underground metal/nonmetal and stone mines by state during 1990-2001. Table 1 also shows the injury risk rates, employees' working hours, and lost workdays. Overall, 65 fires occurred in 20 states; these include 2 fires and no injuries for contractors. Six of the fires caused nine injuries. The yearly average was 5.4 fires and 0.75 injury. Forty-one fires with 2 injuries occurred in metal mines, 14 fires with 7 injuries occurred in nonmetal mines, and 10 fires with no injuries occurred in stone mines. The underground mine fires required 25 mine rescue team interventions and 30 mine/section evacuations. The Ewhr value was 260 x 10° hr (Irr = 0.007), and the LWD value was 83. Idaho had the most fires (eight fires and no injuries), followed by Louisiana (seven fires and two injuries), Michigan (six fires and six injuries), and Missouri (six fires and no injuries). Of these states, Michigan had the highest injury risk rate value (Irr = 0.146). Table 2, partly illustrated in figure 2, shows the number of fires, fire injuries, risk rates, employees' working hours, and lost workdays by time period. The number of fires during the six time periods show an increase during the fourth period followed by a sharp decrease during the fifth period and a sharp increase in the last period. The number of fire injuries show an increase followed by a decrease during most of the periods, accompanied by a decline in employees' working hours during most of the periods; an increase is seen during the third and fourth periods. The In values follow patterns similar to those shown by the injury values. Tables 3-8 show the number of fires by ignition source, method of detection and suppression, equipment involved, location, and burning material by time period. Figure 3 shows the major variables related to fires for 1990-2001. Table 9 shows the number of fire injuries per number of fires causing injuries and total fires by year, ignition source, equipment involved, and location.
Citation

APA: Maria I. De Rosa  (2004)  Fire Data Analysis For All Metal/Nonmetal Mining Categories - Underground Metal/nonmetal And Stone Mine Fires

MLA: Maria I. De Rosa Fire Data Analysis For All Metal/Nonmetal Mining Categories - Underground Metal/nonmetal And Stone Mine Fires. The National Institute for Occupational Safety and Health (NIOSH), 2004.

Export
Purchase this Article for $25.00

Create a Guest account to purchase this file
- or -
Log in to your existing Guest account