OFR-13-77 Use Of Room Temperature Infrared Diodes For Determining Methane Concentration In Air

- Organization:
- The National Institute for Occupational Safety and Health (NIOSH)
- Pages:
- 97
- File Size:
- 27599 KB
- Publication Date:
- Jan 1, 1976
Abstract
The research to be described is directed to the construction of an instrument that detects methane in air. The principle on which it is based is that methane gas absorbs infrared radiation in the wavelength range of about 3.2 to 3.4 micron. Solid state p-n junctions of composition In, .97Ca.03As emitting radiation in a band centered at 3.3 micron were grown by liquid epitaxy on InAs. Fight separate growth cycles and a total of 200 diodes were measured to determine total power, wavelength peak, spectral. half width and reproducibility of the method. In order to compensate for temperature changes, dual emitter systems (one InGaAs, and one InAs diode) mounted on the same TO-5 header were made. These devices were imaged, using a folded optical path cell, on large area InAs detectors, grown by a planar diffusion technique. In the 0-50°C range the primary temperature sensitivity is in the InAs detector rather than in the emitters. Several methods to reduce the overall temperature sensitivity to within acceptable limits were demonstrated. Humidity was shown to have a negligible effect on the measurements.
Citation
APA:
(1976) OFR-13-77 Use Of Room Temperature Infrared Diodes For Determining Methane Concentration In AirMLA: OFR-13-77 Use Of Room Temperature Infrared Diodes For Determining Methane Concentration In Air. The National Institute for Occupational Safety and Health (NIOSH), 1976.