Optimal Leaching On Hydrometallurgical Process of Recycling Batteries Using Less Energy and Reactants

The Minerals, Metals and Materials Society
Felipe Costa Hashimoto Bertin Rodrigo de Souza Dalti Pereira Denise Crocce Romano Espinosa Jorge Alberto Soares Tenório
Organization:
The Minerals, Metals and Materials Society
Pages:
8
File Size:
1288 KB
Publication Date:
Jan 1, 2014

Abstract

"The increasing amount of portable devices and their fast obsolescence generates an increasing quantity of discarded batteries. The recycling process of discarded batteries allows the recovery of metals for further use and avoids the contamination of soil and water. Even though there are several researches on the topic, few papers focus on mixed batteries. The purpose of this work is to characterize a mass of collected mixed batteries and study the hydrometallurgical process of recycling. The specific leaching parameters studied were pH, temperature and reduction potential. The specific goal was testing the selectivity of pH for leaching each metal. The results show that the optimal leaching occurs in acid solutions with negative pH at IM of sulfuric acid and at room temperature (25°C).IntroductionThe increasing portability of electronic devices in the past century along with their fast obsolescence produce tons of discarded materials yearly that could be recycled generating new materials for the industry. For example, metals such as cobalt and nickel, that are worth respectively US$ 30.00 and US$ 16.10 per kilogram[l,2] are disposed in urban trash yearly, which means that millions of dollars are thrown away instead of being recovered and reused[3].Besides the obvious fact that the society is throwing money away, most of these metals are toxic for the environment and all mammals, so when badly stored after use they can be found contaminating ground water which will contaminate the entire lifecycle. Some of these metals can cause cancer, serious lung problems and have bioaccumulative properties [4] resulting in lower productions of natural products and maybe death for consumers.So in compliance to new regulations such as the National Solid Residue Politic (PNRS) and the CONAMA-Resolution N°401 from November of 2008[5]- (that follows similar restrictions and regulations as the European directives) all those urban and electronic wastes need to be correctly disposed and treated before being thrown away on local dump sites.In Brazil the national rate of garbage recovery is around 70%, which only 5% is properly recycled, accordingly to the research of the UFSC, also electronic waste grows at 5% per year [6]The present study was motivated by the fact that recycling processes for batteries are not spread through the country and by the fact that most papers do not try to recycle a mixed mass of batteries, but a specific mixture which does not represent the composition of traditional household wastes."
Citation

APA: Felipe Costa Hashimoto Bertin Rodrigo de Souza Dalti Pereira Denise Crocce Romano Espinosa Jorge Alberto Soares Tenório  (2014)  Optimal Leaching On Hydrometallurgical Process of Recycling Batteries Using Less Energy and Reactants

MLA: Felipe Costa Hashimoto Bertin Rodrigo de Souza Dalti Pereira Denise Crocce Romano Espinosa Jorge Alberto Soares Tenório Optimal Leaching On Hydrometallurgical Process of Recycling Batteries Using Less Energy and Reactants. The Minerals, Metals and Materials Society, 2014.

Export
Purchase this Article for $25.00

Create a Guest account to purchase this file
- or -
Log in to your existing Guest account