Resistance of Iron-nickel-chromium Alloys to Corrosion by Acids

- Organization:
- The American Institute of Mining, Metallurgical, and Petroleum Engineers
- Pages:
- 33
- File Size:
- 1097 KB
- Publication Date:
- Jan 1, 1929
Abstract
THE solubilities of a series of experimental alloys covering the range 0 to 100 per cent. Ni, 0 to 30 per cent. Cr have been studied under conditions of complete submersion in several fully aerated acid solutions, and in solutions containing sulfurous acid. In nonoxidizing, hydrogen-discharging acids, if the nickel content is below a certain critical amount, chromium increases the rate of solution and nickel decreases this rate; this critical content of nickel is about 13 per cent. Alloys containing more than this corrode at a constant minimum rate independent of iron, nickel or chromium contents. Austenitic chrome-nickel steels may thus have a resistance to these acids equal to that of nickel-chromium alloys. In nitric acid and in unaerated sulfurous acid rather sharp limits of attack occur which are principally dependent on chromium content. In the former the limit of attack is not related to a particular chromium content but varies continuously with acid concentration. The action of sulfurous acid on these alloys is highly dependent on the presence of small amounts of other substances in solution, and many sulfurous acid mixtures rapidly attack alloys to which the pure acid is wholly inert. The observed effects are. not compatible with Tammann's theory relating corrosion resistance to lattice structure but are believed to be concordant with current views of the electrochemical nature of corrosion.
Citation
APA:
(1929) Resistance of Iron-nickel-chromium Alloys to Corrosion by AcidsMLA: Resistance of Iron-nickel-chromium Alloys to Corrosion by Acids. The American Institute of Mining, Metallurgical, and Petroleum Engineers, 1929.