Search Documents

By A Domanti, C Jewkes

This paper describes the design and constructability issues investigated in the selection of a trenchless solution in comparison to trenched construction options as part of a scoping study for the augmentation of the existing Bulimba Creek Trunk Sewer in Brisbane. Initial work involved the planning of alignment options vis-a-vis ground geology, geotechnical conditions, location and depth of shafts considering potential construction technology, flotation and stability of the tunnel, availability of construction sites and the influence of construction works on neighbourhood properties and the immediate environment. Two design pipe sizes, DN1200 and DN1500, were considered, and factors including jacking forces, specification of product pipes, pipe joints, pipe jacking methods and the associated impacts of ground settlement were carried out. Of particular interest was research on suitable lubricating fluids with the potential to minimise jacking forces and maximise the length of pipeline between launch and reception shafts.

Jan 1, 2008

Most types of nuclear power reactors use uranium dioxide fuel. Power reactors using natural uranium dioxide'fuel are of special interest to countries such as Australia that have their own uranium supplies. A wide range of uranium dioxide powders can be fabricated and the ideal one flows readily, presses without the need for binders or lubricants, sinters to the required density and gives low reject rates at all fabrication stages. Sinterable uranium dioxide is usually produced via the ammonium diuranate route. The A.A.E.C. is aiming to demonstrate production of nuclear grade uranium dioxide from Australian concentrates, improving technology where possible. Details are given of the dissolution, solvent extraction, precipitation, filtration, drying, and calcination-reduction steps. Solvent extraction from sulphate media is also under study with a view to developing a process to produce a nuclear grade product at the mine treatment plant site,

Jan 1, 1969

By Massacci P

A review has been made of the studies focusing on methods for the description of grain -size distribution after breakage and, separa- tely, of the degree of liberation of the miner- al species making up the various grain-size classes of comminution products. The purpose of the study has been to de- velop an overall model of the phenomenon which, owing to the very effect of comminution, leads to the formation of grains that are generally of mixed composition. A calculation procedure has thus been de- veloped for the liberation function taken as the assessment of the distribution of mix com- ponents in the products obtained after a commi- nution process. The aim is to identify a func- tion which may, to a certain extent, simulate the variation of the grade-recovery function of an ore in relation to its degree of comminu- tion. The numerical model thus obtained has been tested out on results obtained experimentally.

Jan 1, 1986

By Baynes F. J, Bermingham A. G

The 6000m long King Headrace Tunnel will be driven through hard Owen Conglomerate in the Eastern third and feldspar porphyry in the Western two thirds, with the anticipated hardness up to 350MPa unconfined compressive strength. Since the Commission had not driven a long, large diameter tunnel for some twenty years, major research was undertaken to assess the current tunnelling trends. Tunnel boring machines were compared with drill and fire equipment. Rail equipment was compared with rubber tyred equipment. Tenders were called with tenderers invited to submit alternatives if desired. Commissioning and production excavation using the equipment is discussed with the final conclusion being that the individual items of equipment purchased combined to make an efficient hard rock drill and blast system capable of progressing through all rock conditions likely to be encountered on the King and Anthony Schemes.

Jan 1, 1987

It is a facet of modern-day life that change, even of a revolu- tionary nature, normally passes without comment. People have become so conditioned to continuous improve- ments in every aspect of their lives that they would be surprised only if there were to be no change. This paper seeks to demonstrate the extent of technical change, and to indicate the need for a fuller advantage to be taken of the technologies available, or potentially available, to the profes- sion. It contends that the mineral industry has been particularly slow to embrace technical change, and has good reason to con- sider an improved attitude for both prosperity and survival.

Jan 1, 1988

By Singh RN, Yuejin LI

The problems experienced with longwall mining machinery motivate the development of an expert system for fault diagnosis. The techniques of knowledge representation, database, knowledge base and inference engine guide the selection of the expert systems and languages -"Turbo Prolog"- as exemplified in the case study of hydraulic support. The aim is to hasten future development of a fault diagnosis system and the design of a system to locate and determine the causes of failure of longwall machinery. The system would use its stored case history and other information to make fault diagnoses and suggest appropriate remedies. Consequently down-time would be reduced and production and profitability should increase.

Jan 1, 1991

Successful restoration of Ballarat region alluvial gold workings to Box-Ironbark forest requires realistic evaluation of techniques. A stocking level threshold of 68 percent is used to rate the success of 'broadcast' seeding of E. microcarpa, E. Melliodora and E. Leucoxylon.Failure necessitates follow-up enrichment planting with tubestock, which is considered undesirable, interalia, due to pathogen, spacing and economic problems.

Jan 1, 1992

By Bowra N

Working capital is best described as money that must be supplied from a company's treasury to buy inventories for raw materials and finished products and to provide credit to customers who have not yet paid for delivered products. Working Capital requirements for resource projects are to a large extent, dependent on specific characteristics of the projects concerned. Important variables are the nature of the project and speed with which sales can be realised. The project's location is also important as this will influence inventory levels. Working capital requirements have a time profile, the present value of which can represent a significant portion of a projects overall capital needs. A significant component of a project's working capital is not readily recoverable or able to be reassigned should the project fail or be deferred.

Jan 1, 1986

As an older member of The AusIMM, I received my 30 year æPearl AwardÆ in June and had my 50th birthday two weeks ago, I am honoured to be here today. I thank those responsible for their confidence in me and in my ability to hopefully hold captive a broad group of individuals who are here as equals, sharing an interest, no a passion in blasting technology and associated works à over the two days you will hear some excellent operational and technical presentations I am sure. But today I will digress; I want to talk about the importance of leadership and how it indeed can be the catalyst for success, improvement and change. There has been much written about leadership, its principals, the charismatic leaders, the doÆs and donÆts and so on à and I for one am not about to give you the Holy Grail; there are many experts with greater wisdom than I on this subject matter. What I do want to do is explore the application of this passion to examples within the world stage and some examples drawn from my experience in mining.

Jan 1, 2007

Land is of extreme importance to citizens of Papua New Guinea and is fundamental to most of their customs and values. Because of this, matters to do with land cannot easily be separated from other matters to do with the community. Good relation-ships with landowners and the community surrounding a development are, indispensable ingredients that -must flavour and colour the entire ;operati on .

Jan 1, 1994

Two independent sets of observations from rifted con-tinental margins suggest a way to reach a quantitative under-standing of how the topography of rifted margins erodes. First, a prominent erosional escarpment, which demarcates an elevated, inland region of low relief from rugged, deeply-incised terrain on the seaward side, is the main feature of the geomorphology of many rifted continental margins. Second, apatite fission track ages from the southeast Australian and southwest Saudi Arabian margins scatter about constant Paleozoic ages over the higher elevations inland from the escarpment, but decrease systematically seaward of the escarpment to near-rifting ages approaching the coastlines. We have developed erosion models based on conservation of mass principles to explain these observations. These models seek to explain the "rejuvenation" of erosion at the time of rifting, initiation of the observed erosional escarpment, and its migration inland with time at a rate on the order of 1 km/10 yr. We find from the modeling that erosion at rift flanks and passive margins is fundamentally a non-linear pro-cess. The erosional development of passive margin topogra-phy has much is common with travelling wave solutions to non-linear diffusion-type problems, and to self-similar sto-chastic processes, such as diffusion-limited aggregation. We suggest that the fission track data record the thermal effects of erosional unroofing at rift flanks and passive continental margins. Models intended to explain the erosional develop-ment of continental margins must explain both the geomor-phology and the fission track observations as well.

Jan 1, 1990

By J Player, K Braddon

High productivity mining is the key to the financial success and stability of modern mines. This can be achieved through the use of new technologies, the development of innovative work practices and optimisation of the mining method to suit the mining environment. Big Bell Mine is a 1.7 Mtpa longitudinal sublevel caving operation at a head grade of 3.14 g/t. Annual production is 170 000 ounces of gold. The selection and implementation of bulk emulsion explosives was seen as the logical progression from blow loaded ANFO for the high tonnage rate required from the longitudinal sublevel cave. Prior to the implementation of bulk emulsions an investigation was required to examine the technical and financial benefits available with the introduction of bulk emulsion. This paper examines the review process and the successful implementation of bulk emulsion explosives at Big Bell.

Jan 1, 1999

By P Hucker, E Hall

Harmony Gold operates the Mount Marion underground gold mine near Kalgoorlie, Western Australia. The mine consists of two ore zones, East and West, and mining of these zones is currently conducted using the sublevel caving method. When mining commenced in the Western zone, the span was insufficient to induce caving of the country rock above. Dyno Nobel, together with Harmony and 360 Drilling, developed an innovative drill and blast solution in order to promote cave propagation and improve the safety of personnel at the operation. The solution involved a series of shallow angle drill holes up to 90 m into the hanging wall of the West zone. These were charged with Titan« 7000 underground bulk emulsion and the HotShotÖ electronic initiation system. The blast used over seven tonnes of emulsion and 46 detonators and achieved the desired result without damaging nearby mine infrastructure.

Jan 1, 2007

Cores of pre-Tertiary basement from ten oil exploration wells are related petrologically to the "axial", "marginal" and "shelf" facies of the New Zealand Geosyncline.A NW. Nelson-type basement is inferred beneath peninsular Taranaki and the western continental shelf. The terms Taranaki Basin and Wanganui Basin are re-defined and the terms North Wanganui Basin, South Wanganui Basin, Pipiriki High, Taranaki Fault, and Turakina Fault are proposed. Major faults are interpreted as of mainly transcurrent type and appear to form the western part of a splay at the northern end of the Alpine Fault. Evidence for a major Cook Strait Fault is reviewed.

Jan 1, 1967

By Seedsman R

The fundamentals concepts of roof support are similar between coal mining, metal mining and tunnelling and yet there are different design approaches, different hardware, and different levels of site investigation. This should not be the case and this paper discusses the key geotechnical issues that should underlie all roof support design - the need to reinforce defects. A design method to build a beam in laminated rock under high horizontal stresses is presented. The method allows for changing rock strengths, defect properties and varying horizontal stresses. At one level the design can be implemented with design charts and tables. Lessons learnt during the implementation of the designs at 5 different mine sites are Discussed.

Jan 1, 1998

The organization of this department is as shown in the following chart:Chief Mechanical EngineerPowerGenerationWorkshopsNew ConstructionMaintenanceTransportCommunity ServicesMineMillSmelterDesign and OfficeOrganizationThe functions of each section will be described separately.MAINTENANCE UNDERGROUND DEPARTMENTThis section covers all mechanical equipment underground as well as fans and winders on the surface, the headframes, and conveyors from the shaft to the crude ore bins. As has been descrIbed, No. 2 Ore shaft was opened up to the surface and a new headframe and receiving bins were erected, and when the new lead crushing and screening plant was constructed and ready for operation, the rope sheaves...

Jan 1, 1953

By E Kozan

The paper presents new developments of the methodology of open pit coal production scheduling optimisation. They deal with the specific features of the exploitation of single coal seam and utilisation of truck-shovel and dragline systems. A production scheduling optimisation model is developed as a linear programming problem. The objective function maximises the net present value of the mining project under the technological constraints for meeting the demand function of the coal processing plant and effective utilisation of the available production equipment. Both principles of mine planning, coal quality optimisation and waste deferment are incorporated in the model. Results of a case study are provided to illustrate the applicability of the optimisation model.

Jan 1, 2003

By J Szymanski, S Planeta

In pursuit of optimising the cemented rockfill system fragmentation of the aggregate, while travelling through the surface-to-underground aggregate transport raise, was investigated and a æfines estimationÆ equation was determined. When used with the rockfill strength estimation equation, the fines estimation equation enables an accurate estimation of the compressive strength to be derived theoretically. Optimum fill raise orientation was examined and recommendations are given depending on the varying stope dimensions. If the maximum dimension of the stope is less than 30.5 m (100 ft), a single, centrally located fill raise will suffice. However, as the stope dimensions increase, the number and orientation of the fill raises becomes more complicated and each stope must be examined on an individual basis.

Jan 1, 1998

By M Wortley, A Cantarutti, G J. Clarke, C

As part of a broad program to optimise the performance of their grinding circuit, BHP Billiton Cannington have installed an OCS¬ Expert system together with three VisioRockÖ online particle size analysis cameras. The main purpose of the system is to stabilise grind size and feed to the flotation circuit. This particular application of OCS¬ is the first installation to incorporate Metso Minerals Process Technology-Asia PacificÆs (MMPT-AP) Dynamic SAG/AG Mill Model, which is able to predict numerous mill parameters that were previously unable to be measured with the existing plant instrumentation. Integrated into the logic of the control algorithm are online vision based, particle size measurements of the AG mill feed and recycle crusher product. This paper will describe the history of the project from initiation to date, the model and OCS¬ logic configuration, and demonstrate the significant benefits realised at Cannington mine.

Jan 1, 2007

An intensely sheared and mineralisedIzone occurs in the Quartz Dolerite Greenstone (or Younger Greenstone) mass on, the western limb of the Kalgoorlie Syncline. This zone comprises the western part of the Golden Mile and has produced the greater part of the 33,000,000 ounces of gold produced to date from the main mining belts. A study of.th e general geological and structural features gives rise to the expectation that the lode shear system,will continue southward on a pitch similar to that of the maln syncline whose axial plane may be referred to as the "Boulder Dyke". Although payable ore has recently been found further south than previously, the expectation of large quantities extending southward from the present mining areas is Problematical.'

Jan 1, 1964