Search Documents

The interfaces between the Broken Hill ore lenses and the enclosing wallrocks are, on a broad scale, parallel to metamorphic layering in the wallrock gneisses and quartzites. In detail, however, the concordant contacts are interrupted by piercement structures, formed by plastic injection of ore into the wallrocks during metamorphism.These discordant bodies vary from minor projections measuring less than I m long, to major ore shoots ("droppers") as much as 60 m long. The intrusive bodies consist of fragmented ore and wallrock in amatrix of recrystallised sulphides. Wallrock fragments have been altered to manganese-rich and calcium-rich mineral assemblages. The injected ore is enriched in sulphides compared with the parent ore, and there has been enrichment in a number of minor elements.Piercement structures formed during the waning phase of high grade metamorphism, when incompetent ore was injected plastically under pressure into the wallrocks, particularly at fold crests. Adjacent to the "droppers", retrograde schists developed as a result of shearing along the ore-wallrock interface.

Jan 1, 1976

One of the responsibilities of the Melbourne and Metropolitan Board of Works is to provide a sewerage system for the metropolis of Melbourne which now contains over 2.5 million people. In providing this sewerage system it was necessary for the Board to embark on a large tunnelling programme some 20 years ago. As a result of this extensive tunnel construction programme, tunnel boring machines and shaft sinking methods have been developed to cope with the soft ground and soft to medium rock found in the southern and eastern areas of Melbourne where the majority of the recent tunnelling has been carried out. While in the last few years radical changes in construction methods have not been made, development has continued and improvements have been made, which have enabled the Board to extend the limits of the ground conditions in which it can efficiently construct shafts and also tunnels with boring Machines.

Jan 1, 1976

The concept of Extreme Gravity is the latest in a series of innovations that has seen a re-introduction of gravity recovery systems into the milling operations of most gold mines. Traditionally, most gold milling circuits are designed around flotation and cyanidation requirements, with the gravity circuit being fit in where possible. Extreme Gravity takes the novel approach of optimising the circuit, in order to maximise recovery by gravity. In some cases gravity systems can achieve high enough recoveries to eliminate the need for chemical systems such as cyanidation or flotation. There are many advantages of such a system including low capital cost, reduced permitting, improved cash flows and much reduced environmental issues. There are a number of plants currently in operation which utilise this new methodology. The Muzhievo project has been an example of a recent turn key success achieving recoveries from 85 - 90 per cent. The details of this project are examined as a case study.

Jan 1, 2000

The company was formed in 1926 to exploit tin bearing veins adjacent to Aberfoyle Creek in north-east Tasmania. In 1928 a 923ft tunnel was driven to explore and develop the mine 150ft below surface. This put the company on a path to become Australia's second largest tin producer by the late 1960's. Recently, Aberfoyle Resources Limited completed a 1.1km tunnel to access the major Hellyer zinc, silver, lead orebody at 300m depth. Production at 1 million tonnes a year is likely, and will make the company a significant world supplier of zinc by the late 1980's. The intervening 20 year history of survival and diversification illustrates principles of mineral exploration which proved valid in the Australian context. The objective of exploration should be to develop mines which can survive rigorous competition and downturns in commodity prices. Such mines will be based on orebodies with many of the following characteristics described by Richards (1986).

Jan 1, 1987

By Shinnosuke U, Zhang HE

In this paper, it is shown that the higher the pre-activation concentration of copper ions in pulp, the larger the adsorption amounts of copper ions and xanthate on arsenopyrite surface, and the better the arsenopyrite flotability in strong alkaline medium. On arsenopyrite pre-activated with cupric ions, the xanthate adsorption density in strong alkaline medium is approximately equivalent to that of cupric ions. It is therefore concluded that an amount of copper ions adsorb on arsenopyrite surface first, and then an amount of xanthate can (and only can) adsorb dependently on the surface active sites produced by these adsorbed copper ions on the mineral, so that arsenopyrite is kept rather flotable and is hardly separated from pyrite even in very strong alkaline medium. Selectively wiping out the surface copper active sites on arsenopyrite is the key point of successful separation of pyrite from arsenopyrite. According to this theory, a new 'SZLI' (know-how) method was recommended to satisfactorily deal with the difficult separation.

Jan 1, 1993

This paper intends to give an insight into what is often considered to be a poor relation of the mining industry but is in fact an integral part of any community. Aggregate production accounts for more than half of the world production of minerals by weight. In New Zealand production of aggregates runs at around five tonnes per capita per year, making it a significant industry. The industry in this country is dominated by smaller operations close to the market due to the widespread population and relative abundance of aggregate. The Logan Point quarry is one of the largest quarries in the South Island with an annual production of around 250 000 tonnes. The market is mainly based around roading and building in the Dunedin area with some higher quality specialist aggregates being used allover Otago. The quarry has been owned and operated by Palmer and Son Ltd for 106 years with a fifth generation family member the current quarry manager.

Jan 1, 1992

Silica and limestone fluxing levels in copper smelting slags were studied. Copper concentrates with flux additions were smelted to matte (55.5 per cent Cu) and slag in a pilot scale submerged combustion furnace.Results indicated that oxidic and sulphidic copper levels in slags were minimised with a slag Si02 level of 36 per cent and a SiO2/CaO ratio of 5.5. Total copper losses in slags were 0.6 per cent under these conditions.To produce the desired slag chemistry, additions of bulk silica and limestone to copper concentrates of fluctuating grades were predicted numerically. The method employed the solution of two simultaneous equations, each respectively for silica and limestone calculations.The predicted flux additions were applied in a further series of tests and the resultant stages were found to be satisfactory. The method is applicable to smelting 'operations which employ two flux bins, with weigh feeders, so that slag chemistry may be controlled with the flux/concentrate feed mix.

Jan 1, 1985

By C D. Ogg, P B. Pope, K M. Lynch, B K. C

Iron-reducing bacteria are able to couple the oxidation of an electron donor to the reduction of Fe(III) to Fe(II) under anaerobic conditions in the generation of cellular energy. Recent evidence suggests that these bacteria are phylogenetically diverse and widely distributed in nature. Our laboratory has isolated thermophilic, thermotolerant and mesophilic iron-reducing bacteria from numerous petroleum reservoirs with varying conditions, groundwaters of the Great Artesian Basin (GAB), and petroleum-contaminated soils. Some of these isolates have been identified as novel species and from genera such as Deferribacter, Bacillus, Alkaliphilus, Clostridium and Thermoanaerobacter. Further investigations have shown that these bacteria are metabolically diverse, not only capable of reducing different metal species but also able to use a range of organic compounds, including polycyclic aromatic hydrocarbons, for growth. Due to their abundance and metabolic capabilities, it is possible that iron-reducing bacteria may be important in microbially-enhanced oil recovery processes and in the bioremediation of contaminated soils and aquifers, particularly in anaerobic zones.

Jan 1, 2004

Comalco's Bell Bay smelter produces some 94 000 t.p.a. of primary aluminium in the form of foundry alloys, extrusion billet and rolling blocks. The extrusion billet and rolling block are produced by a process, in which molten aluminium is poured into an open ended water cooled mould of the required shape. The bottom of the mould is initially closed off by a dummy or starting block. Primary cooling takes place at the mould wall and secondary cooling is achieved by direct water sprays onto the out side shell of the product. Careful preparation of the molten alumin- ium is essential if stringent alloy specific- ation limits are to be met. Optimum casting temperature must be maintained within a narrow range and metal cleanliness is important to ensure a consistent product. Increased demands of recent years for larger product and higher standards of surface quality and dimensional control have been instrumental in forcing improvements in furn- aces, casting machines and in mould and dummy Doq,

Jan 1, 1977

By Croggon R

Passing a direct current through a jointed fine grained soft rock mass auses the movement of water by the process of electric-osmosis. There are other processes such as electrolysis which transport ions that interact with associated ions and can, in turn, be oxidised. This results in the dissolution products being transported towards the cathode electrode. In the cathode region the ferrous hydroxide is oxidised to ferric hydroxide %%ith consequent precipitation. The cracks and joints are current pathways, along which the ferric hydroxide is deposited. This deposition reinforces the joints and increases the shear strength. By adding calcium chloride to the anode, the rate of corrosion is increased with the concomitant increase of deposited ferric hydroxide along the joints. This, in turn, significantly increases the joint shear strength. The process is pervasive in that the current via the water paths travels through the crack and joint systems The result is that not only specific joints are reinforced but the cracks and mtciconnected voids are also reinforced.

Jan 1, 1997

By Bailey DJ

Loader cut and fill stoping was first used at New Broken Hill Consolidated Limited mine in 1966. The equipment used included single boom pneumatic jumbos for drilling up- holes, diesel loaders for ore removal and diesel utility vehicles for rockbolting and servicing. Since 1966, there have been many modifi- cations and changes both in the equipment and stoping method. Twin boom pneumatic or hy- draulic drilling jumbos have replaced single boom pneumatic jumbos, electric loaders have replaced diesel loaders, diesel forklifts have replaced utility vehicles and "'flatbacking" has superseded uphole stoping. Concurrent with this has been the introduction of cable dowels in stope backs which has enabled loader cut and fill stoping to be used more extensiv- ely than in the past. There are now six loader cut and fill stopes at both mines and this paper traces the evolution of this method outlining the reasons for changes in technique and equipment.

Jan 1, 1982

By Trevits MA

The United States Steel Corp. in cooperation with the United States Government is conducting a large-scale methane drainage field demonstration using stimulated vertical boreholes drilled in advance of mining. A grid pattern of 23 boreholes, isolating approximately 1.5 km2 of coalbed area, has been drilled to the lower bench of the Mary Lee coalbed, Jefferson County, Alabama. Upon completion of drilling operations, various hydraulic stimulation treatments utilizing nitrogen-generated foam, water, and gelled fluid were performed to enhance the rate of methane gas removal. Production from the grid pattern began in September 1977 and continued as the last borehole was placed on production during October 1980. To date, in excess of 33,800,000 m3 of methane gas has been drained as a result of this effort. Underground mining operations were approximately 3.2 km from the grid pattern when production began and have currently progressed to within 1.6 km. Underground interception of the grid is expected in 1986.

Jan 1, 1982

Biologically-mediated phenomena are involved in many of the natural processes by which mineral deposits are formed and ore bodies transformed and degraded. They may facilitate the environmentally-damaging effects of mining and mineral-processing operat- ions. Under contrived and controlled conditions, however, these phenomena can form the basis for economically- attractive processes for the recovery of metals from low-grade deposits by dump, heap or in situ leaching. They have application also in processes for the regeneration of leaching reagents and some potential for'-the recovery of metals from dilute solution. The micro- organisms concerned are potential sources for the production of novel flotation and solvent-extraction reag- ents. Perhaps the greatest opportunity for biotechnological processes in min- ing and metallurgy lies in the possib- ility of the evolving of novel proced- ures for the substantially complete recovery of metals from process tail- ings by the unlocking of recalcitrant and complex mineral assemblages, and for the beneficiation of some mineral materi,hls.

Jan 1, 1982

In this paper the reactions which may lead to particle hydrophobicity/hydrophilicity as a function of grinding environment-are reviewed. The results of pulp chemical investigations related to a Cu-Pb-Zn ore on a pilot plant scale and laboratory tests with a Pb-Zn ore to evaluate the effect of some inhibitors on grinding/flotation are presented. The flotation recoveries of the ores treated by conventional and autogenous grinding methods show only a marginal difference and the results favour autogenous grinding. Iron originating from several sources manifests in the form of insoluble hydroxy complexes in the pulps. Such metal hydroxy complexes are hydrophilic and coat the mineral surfaces indiscriminately. On the other hand, selectivity is a problem for pulps ground by autogenous milling. Some corrosion inhibitors used in the laboratory grinding/flotation tests on a Pb-Zn ore showed maximum reduction in the wear of the grinding media ranging from 25 - 36 per cent, depending on the type and concentration of the inhibitor.

Jan 1, 1993

Owing to the 'creeps' and consequent movements in the mines, followed by the recent fire in the southern workings, the whole of the orebody above the 800 ft. level is now very much crushed and broken. The same applies to the hanging wall or overwall coutrny, which has subsided towards the workings, so that for some years past all development work within the lode has had to be carried out with extreme care.The continual but slow subsidence of the overburden into the stopes necessitates a periodical renewal of all gangways in the lode, and, as the subsidence amounts to as much as 60 ft. in places, these new gangways must necessarily pass through the mullock-filling of old stopes in addition to broken ore. They at times pass into the broken ground of the hanging-wall for some distance, where the orebody has widened underneath by the original folding and puckering.

Jan 1, 1932

By H Kundapen, J J, C Rumble, S Miller

This paper describes measures taken by Ok Tedi Mining Limited (OTML) to minimise the risk of acid rock drainage (ARD) resulting from mining operations at its Mt Fubilan porphyry copper-gold mine in the remote Star Mountains of Papua New Guinea. The risk of acid generation and metal leaching as a result of oxidation of these sulfidic deposits has long been recognised by OTML. In 1998, OTML instigated the ARD Management Program to fully evaluate these risks and to formulate, if necessary, trial and implement appropriate management strategies. In implementing the ARD Management Program, OTML has adopted a risk management approach consisting of five stages: risk identification, risk analysis, risk assessment, risk treatment, and review and monitor. Significant progress has been made in relation to risk identification, analysis and assessment. The work currently underway to put in place a comprehensive risk treatment and review process will ultimately determine the success or otherwise of this approach.

Jan 1, 2003

By Gelding P. W, van Herk H

The Cattlegrid copper orebody is a concealed thin, tabular sheet localised near an unconformity between two sub- horizontal Precambrian sandstone units. It extends over an area of 1,000 m by 500 m within a wider area of mineral- isation. The ore consists of complex sulphides and is neither massive nor disseminated. It consists mainly of irregular fillings in pore space developed between clasts in sandstone breccias, in fault zones and joints and along stratification planes. Its habit is unique amongst Australian base metal ore bodies. During the pre-development period ore was outlined by percussion holes but in studies leading to investment decisions ore reserves were manually calculated from intercepts and assay results of cores from diamond drill holes. The methods used for estimating reserves in the pre-production and production periods are described and evaluated by comparing mine production during the first five ore production years with the forecasts made.

Jan 1, 1979

By Jena P. K

Smaller deposits of high grade chalcopyrite or the concentrates of low grade and complex copper bearing ores, can be subjected to extraction processes other than smelting and converting. Low temperature chlorination and segregation processes are among those mentioned in the literature. In the present work, extraction of copper from a Brazilian chalcopyrite concentrate by slurry chlorination with chlorine gas at room temperature, dry chlorination by chlorine gas in the temperature range of 350 to 450¦C and segregation roasting of the calcined concentrate in the temperature range of 650 to 800¦C have been carried out. The effect of several experimental variables on the extraction of copper has been discussed in all these cases. Under optimum experimental conditions, 100 per cent Cu extraction was possible by either slurry or dry chlorination processes and around 86 per cent Cu by segregation roasting. For all the three cases, possible methods have been suggested to trial the studies on a pilot scale to assess their technoeconomic viability.

Jan 1, 1992

By Butcher NM, Walker GS

Argyle Diamond Mines Pty. Limited (ADM), manager and operator of the Argyle Diamond Mines Joint Venture (ADMJV) will recruit approximately 400 employees during 1985 to operate the new large-scale, open-cut diamond mine and treatment plant being developed at Argyle, in the East Kimberley Region of Western Australia. These employees will live in Perth or environs and will commute to work at Argyle via chartered jet aircraft. On site, they will be accommodated in self-contained single person's quarters, with central messing and recreational facilities. Rostering systems have not been finalised, but it is likely employees will rotate through a cycle of 14 days at site and seven-days on leave in Perth. ADM spent three years evaluating residen- tial options before deciding to commute its workforce from Perth. Another 70 senior staff will reside in Kununurra (the nearest established town, 250 km from Argyle) and commute to the mine daily by air.

Jan 1, 1984

In the humid, subtropical climatic conditions, typical of Papua New Guinean high-lands, auriferous carbonate-quartz lodes and stockwork veins of the Upper Ridges mine at Wau, have weathered in situ forming manganese dioxide-quartz wad flatmakes and veins. Vein assemblages and sulphidized host breccia have been chemically weathered to 20-25m depth, and microscopic grains of electrum (550-600 fine) formerly enclosed in carbonate, sulphide and quartz have dissolved in the oxidizing alkaline fluid. Coarse secondary electrum, crystalline and dendritic, is concentrated by manganese dioxide and at the base of chemical weathering. Fineness is unchanged, eliminating the possibility of gold and silver migration as a chloride complex. Experimental tests on the stability of thiosulphate, and its ability to dissolve gold and silver from colloid, crystal and synthetic alloy confirm that secondary electrum at Upper Ridges is most compatible with precipitation from (Au,Ag)(S203)23-; a complex readily destabilized in the presence of MnO., or with decreasing Eh.

Jan 1, 1984