Search Documents

The process and control technologies incorporated into the coal preparation plant at Newlands were to be used for the first time in Australia. The commissioning organisation and procedures were set up on the basis that commissioning personnel, while being competent, would be unfamiliar with the equipment. In addition the commissioning process would have to be completed quickly. The organisation coped with all of these problems and more.

Jan 1, 1986

By Ballantyne GH

The Ladolam gold deposit on Lihir Island, in Papua New Guinea, is a large disseminated gold deposit hosted by hydrothermal breccias. The deposit occurs in the cupola zone of a 350,000 year old monzonite stock which is emplaced in the collapsed caldera of a shosho- nitic stratovolcano.

Jan 1, 1987

By Holliday RJ

The Imperial Smelting Furnace (ISF) was developed in Britain during the 1950's as a process which could produce zinc from a blast furnace. Since then it has evolved into an efficient means of producing zinc and lead from lower grade raw materials, both of primary and secondary origin. These changes have been in response to the need to improve the cost competitive position of the ISF in a climate of decreasing metal prices. The improvements at the Cockle Creek smelter of Sulphide Corporation Pty Limited have resulted from work undertaken in four main areas: 1. Changes in plant design and operating practice to give more stable furnace operation. 2. Improvements to the quality of sinter being charged to the furnace. 3. Improved monitoring of process variables and the formulation of control strategies based on the improved data. 4. Increased understanding of the processes occuring within the furnace shaft to allow predictive modelling to be undertaken. Work in these areas is still progressing but the work to date has resulted in a significant improvement in the production rate and efficiency of operation.

Jan 1, 1984

By Hartley JS, Wills KJA

The Thalanga massive sulphide deposit is hosted by Upper Cambrian rhyolites and volcaniclastics of the Mt. Windsor Volcanics near their contact with overlying dacites, rhyolites and sediments of the Trooper Creek Formation. The ores and host rocks have been subjected to a single strong deformation and to lower to middle greenschist facies metamorphism. A main lens with surface gossan dimensions of 55U m x 6 m dips steeply, plunges shallowly to the west and is offset by a series of normal faults. It is flanked by smaller lenses to the east where the mineralized horizon is stopea out by granite. The area to the east and south of the gossan is masked by Tertiary cover. A complex exhalite package is represented by banded sphalerite-pyrite- galena-chalcopyrite, massive pyrite and chalcopyrite and assemblages dominated by dolomite, chlorite-actinolite, tremolite, talc, barite and rare gypsum. Accessory tetrahedrite, arsenopyrite, bismuthinite, magnetite and native gold are associated locally. Pods of quartz-magnetite formed distally. The ores are underlain by strongly to moderately pyrite-silica-sericite altered rhyolites with the strongest alteration closest to an interred synvolcanic fault. This alteration is characterised by an enrichment in MgO, Na2O, FeS2 and base metals with a depletion in CaO and Na2O. There is a general enrichment in Pb and Zn towards the hanging wall with some enrichment of Cu near the base of the main lens due to replacement by ore tiuias near vent discharge sites. Zonation of Cu to 2n-Pb in also evident over narrow intervals

Jan 1, 1987

A sequence of ultramafic units, very well exposed in Munro township in the Abitibi areal, of the Cahadian Shield, exhibit features which indicate that they are sub-aqueous extrusions. They occur within a sequence of tholeiitic pillow lavas, thin graphitic sediments. and large differentiated sills. The units range from a few metres to more than 250 m in length and less than 1 m to over 30 m in thickness. Over 60 individual units, occurring as flat pancakes on top of one another, make up a total exposed thickness of 150 m. The units have formed from a magma composed of a very olivine-rich picritic liquid carrying up,to 40 per cent olivine phenocrysts in suspension. Different units display a variety,of cross-sectional profiles. As an example of the most extreme type of profile, a typical unit 2 m thick consists of a cap of highly jointed fine-grained quenched rock, 10-30 cm thick, which becomes coarser downwards, grading into a zone composed of radiating and criss- crossing skeletal olivine crystals forming the well-known spinifex texture. This becomes even coarser-grained downwards, with "books" of parallel platey olivine crystals developing sub-perpendicular to the plane of the units. Beneath this zone, which may be up to 1 m thick, there is an abrupt transition to a cumulus-textured rock composed of rounded

Jan 1, 1973

By Xueqiu H

Since the hypothesis of coal and methane outburst mechanisms based on elastic mechanics gives no consideration to time, it cannot give satisfactory explanation of the outburst occurrence and its development. A creep mathematical model of coal containing gas has been set up through creep tests and analysis under a condition of triaxial compression. Such a model can explain the phenomenon of coal and methane outbursts successfully. The tests proved that there is no essential difference between the rheological properties of prone outburst coal and non-prone outburst coal. Outburst can take place in any kind of coal if the rheological conditions of coal containing gas are met. The creep mathematical model provides a basis for establishing a comprehensive index of coal and methane outburst potential.

Jan 1, 1992

By Bluck R. G

The Murray Basin is known to contain major deposits of heavy mineral sands and intensive exploration for new deposits is being conducted in Victoria, South Australia and New South Wales. The western Basin was well served in the Pliocene and Early Pleistocene by a variety of appropriate sediment sources, and potential coastal traps. Immature, fluvially-sourced sediments forming the Pliocene coastal complex of the Marmon-Jabuk Range in South Australia are part of a marginal marine assemblage containing a suite of economically important heavy minerals that include ihnenite, zircon, rutile and tourmaline. From a consideration of Pliocene palaeogeography and coastal dynamics, specific targets where concentrating processes are likely to have operated are identified in the South Australian portion of the Murray Basin. Such palaeo-environments include the down-drift, littoral zone of discrete foredunes or coastal barriers, the source area for transgressive dune complexes, tombolo facies, and intertidal shoals and sandbanks. Similar coastal processes are recognised for a preserved Early Pleistocene barrier complex.

Jan 1, 1990

Iron and steelmaking slags have been utilised for a century. All dumps are now exhausted. Because of constraints in establishing new stock yards, all slags have to be utilised immediately. At present, this is being achieved. Only in a situation where there is an increase in pig iron and crude steel production, together with the impact of new residual materials competing from other industries can marketing problems be anticipated.

Jan 1, 1979

By Cowie WJ, Utting BS

The alluvial gold industry of New Zealand is based on the placer deposits in Otago and on the West Coast. Production from these since discovery in the 1850's has been an estimated 480 tonnes (15 million ounces) of gold. Annual output has expanded continuously since 1980 and is expected to be over 2 tonne of gold for 1989.Following a historical review, the characteristics of typical operations, which use hydraulic excavators and mobile trommel units are discussed. Descriptions are then given of alluvial activities in Otago and on the West Coast.

Jan 1, 1990

The prevention of silicosis by metallic aluminium has been reported by Denny, Robson, and Irwin in two papers. The first was published in 1937; the second, in 1939. The results definitely established that silicosis was prevented in animals by the inhalation of small quantities of aluminium. The present communication records subsequent progress in this field of research.

Jan 1, 1944

By Hill G

The Boddington Gold Mine (BGM) is managed by Worsley Alumina Pty Ltd (Worsley) and is located 110 km south-east of Perth, Western Australia. The gold mine, which has operated since mid-1987, was originally constructed to treat 3 Mtpa of gold bearing oxide ores, has subsequently been expanded to treat 7 Mtpa and is presently one of the largest gold producing operations in Australia.During 1990 a Supergene/Basement Plant was constructed to treat 250 000 tpa of copper supergene and hypogene ores and basement ores which contain significant gold grades and which are encountered at the lower levels of the existing oxide orebody. The SupergeneBasement Plant has the versatility to treat a wide range of ore types, producing both gold bullion and copper-gold concentrates. It is a stand-alone facility adjacent to the existing 7 Mtpa gold plant.

Jan 1, 1992

In Australian collieries, solutions to the outburst problem must be implemented in a highly competitive environment which has a low tolerance on negative productivity effects. Solutions are only applicable if the overall viability of the operation remains sound. Minimum time must be spent on alleviation and control measures. This is favoured by simple geology, advanced warning and efficient alleviation and control procedures. Research requirements in support of this include 1. an improved means of predicting the nature and location of outburst zones ahead of the face and, 2. an improved means of measuring the effectiveness of gas drainage. For additional safety at the face, a means of continuously monitoring outburst proneness is required. In general, greater emphasis is required on improved instrumentation.

Jan 1, 1987

By Borsaru M

The production of high-grade calcined bauxite is very dependent on the moisture content of the final product. Existing procedures rely on the ignition of small samples to monitor the effectiveness of the calcination process. The results obtained by this gravimetric technique are several hours behind production and do not permit regular adjustment of the furnace to optimize the control of the chemically bound water content (LOI).To provide rapid and hence more relevant results, a neutron moderation technique has been developed for measuring the LOI of bulk samples of calcined bauxite while they are still hot. The method uses fast neutrons from an 241 Am-Be neutron source to irradiate the samples, and the backscattered thermal neutrons detected are a measure of bound moisture content.The rms deviation between neutron and conventional determinations of LOI, in 15 calcined bauxite samples, was 0.08 per cent LOI over the range 0.1 to 0.9 per cent LOI. When allowance is made for the rms error in the ignition method, the error in the neutron method is found to be 0.07 per cent LOI.

Jan 1, 1985

The Beruang Copper-Gold Deposit is located very near the centre of Kalimantan in Indonesia. It is a dacitic tuff hosted deposit currently being explored by Kalimantan Gold Inc of Canada. Exploration activity to date at Beruang has been focused on the Main Zone, which is defined by a north-south elongate, 1 + 1.5 km zone of anomalous copper and gold, and intense phyllic alteration. The disseminated sulfides responsible for the anomalous copper values produce a moderate to high chargeability signature. Phyllic alteration is overlain at high levels, and on the western edge of the Main Zone, by advanced argillic alteration. The dacite tuffs hosting the mineralisation are cut by post-mineralisation dacite dykes that are delineated by ground magnetics and geological mapping. Base metals, principally zinc and lead, form broad halos around the Main Zone. These metals are incorporated in massive NE-trending, polymetallic mineralisation that outcrops to the north and south of the Main Zone. IP survey results highlight the highly pyritic NNE-trending shear zone, which hosts most of the copper mineralisation in the Main Zone. A high chargeability anomaly at depth in the central-east part of the Main Zone is interpreted to be the source for mineralising hydrothermal fluids. This is suggested by zonations in alteration and mineralisation. A deep chargeability anomaly can be correlated with the downward plunge of a pyritic breccia, encountered at shallow levels in drillholes, and is a potential breccia pipe target. Compilation and inversion modelling of the IP results has yielded some interesting drill targets.

Jan 1, 2004

Completing its historical role the opera tion of copper blast furnace of the Saganoseki Smelter was terminated in 1970, but it left some interesting data on metal lumps formed at the furnace bottom. Analysis disclosed the lumps to be speiss containing 100 to 10,000 g/t of Au and Ag and stratified to iron speiss and copper speiss. Solidifying temperatures of iron speiss and copper speiss being approximately 1,090¦C and 800¦C respectively, copper speiss precipitated at the lower side. The distribution coefficient of Au and Ag between matte and speiss (g/t Au(Ag) in matte / g/t Au(Ag) in speiss) is in the range of 1 x 10 2 to 2 x 10 ' and 1 x 10 1 to 5 respectively. The higher Cu % is in speiss, the-more An and Ag are distributed into speiss. Except for a few data, these results comfotm well to the range of distribution equilibria of Au and Ag in matte and speiss systems by Gerlach and Others.

Jan 1, 1980

The history of the physical chemistry of steelmaking is reviewed through international conferences, and compared with the Japanese contribution. Subjects remaining to be solved are discussed. Several steelmaking technologies developed recently in Japan are surveyed.

Jan 1, 1980

The Goonumbla district of central-west New South Wales, Australia, hosts four significant porphyry Cu-Au deposits that contain a combined probable ore reserve of 71.7 million tonnes at 1.2 per cent Cu and 0.5 g/t Au. Mineralisation in the Goonumbla deposits is associated with narrow, pipe-like intrusions of quartz monzonite porphyry, in which several intrusive phases have been recognised. Five textural characteristics have been used to distinguish the various intrusive phases recognised in the Goonumbla porphyry deposits: (1) phenocryst abundance; (2) nature of the groundmass; (3 and 4) proportion and mineralogy of the mafic and non-mafic phenocrysts; and (5) the presence or absence of anhedral quartz grains in the groundmass. In addition, each intrusive phase is classified according to its estimated original quartz, alkali feldspar and plagioclase contents. Features common to all of the intrusions are that they contain two types of plagioclase and two or three types of K-feldspar phenocrysts in variable proportions. Most of the intrusions also contain apatite micro-phenocrysts. The groundmass textures range from aphanitic through granular to euhedral K-feldspar in a quartz matrix. With only one exception, all of the intrusive phases recognised are either quartz monzonite porphyry or mafic (>5 per cent mafic minerals) quartz monzonite porphyry. The exception is a biotite - phyric monzodiorite, which occurs in the basal portions of one of the deposits. Textural variants of intrusive phases at Goonumbla have been investigated to establish whether specific combinations of characteristics indicate mineralised intrusions, while others suggest barren ones. Some correlations between intrusion types and Cu and Au grade have been recognised. The most important textural characteristic that relates to high grade mineralisation appears to be the low proportion of mafic minerals, because the quartz monzonite porphyry intrusions hosting most of the mineralisation in the two deposits studied contain

Jan 1, 1999

With the advent of COAG reforms in the late 1990s requiring full commercial return from æpublic infrastructureÆ, and the tightening regulatory compliance for any project that involves the development or modification of any natural resource, it has become increasingly difficult for the private sector to contemplate development and/or ownership of new large-scale water supply infrastructure. The hurdles that must be overcome often seem insurmountable even before a detailed understanding of the project challenges can be developed. Australia has prospered over the last 50 years in an environment where regional development, including mining, has been encouraged by high commodity prices, a well-trained and available labour force and abundant spare capacity in the necessary infrastructure, in particular rail, power and water. Unless future infrastructure is created in advance of, or closely following, demand, this prosperity may be in jeopardy. This paper presents a snapshot of todayÆs project development challenges, and with reference to some recent case histories, argues that owing to their unique background, culture and status, water utility government owned corporations (GOCs) are well-suited to fulfilling the demand for new water infrastructure.

Jan 1, 2006

By Cutler JL

At the present stage of the Rundle oil shale project planning, with depressed world oil prices, early development of the resource is unlikely. However, this postponement is being used to carry out technical studies required to evaluate alternative rehabilitation strategies and establish a sound environmental planning basis. Major technical data from the following studies are reviewed: Resource: - mine planning; material characterisation; retorting; geology; Environmental: - meteorology; surface water management; laboratory and field leachates; revegetation; waste characterisation; hydraulic and chemical modelling; dust suppression; plant/water interactions; and impact evaluation. These studies have shown that topsoil replacement, seeding mixtures, fertilizer application rates, subsoil quality and handling, waste pile slope and most importantly soil water storage are key factors in successful rehabilitation.

Jan 1, 1987

A contract for three 20 ft diameter vertically mounted axial flow fans of the same aerodynamic design, was placed by Mount ]sa Mines Limited in 1963. The hydraulic blade pitch changing mechanism, the method of blade fabrication, and the roll out centre casings are features of these fans. Protection devices and fan control are designed for unattended operation and remote control. The erection and commissioning of the fans during 1964-65 is described.

Jan 1, 1967