Search Documents

The techniques used by the State Electricity Commis- sion of Victoria to handle and store brown coal in the both the raw coal and boiler bunkers are outlined. These tech- niques were adopted in agreement with the science of modern bulk solids handling. By successful balance between practical requirements and bulk solid handling system design require- ments the Commission expects to confidently attain reliable coal flow even for the most adverse of coal flow properties. Attainment of this goal demanded full attention to channel detail selection. An outcome of this attention has been the development of a novel bunker and discharge arrangement for handling extremely difficult to handle coals. Due to the novel features of this slot bunker outlet arrangement it's ad- vantages and disadvantages are discussed.

Jan 1, 1987

Haematite Recovery from a Tailings Stream Laboratory and pilot scale testing were carried out in 1999 on a tailing sample from a North American iron ore plant using gravity, magnetic and flotation techniques. The ore contained 16 per cent iron mainly in the fine (-38 ¦m) size fraction. Two methods of evaluating the separation efficiency were used; Selectivity Index and Z factor analysis. Tabling and magnetic separation produced poor results, with flotation testing showing some promise, generating concentrates assaying more than 40 per cent Fe. High grade concentrates containing more than 67 per cent Fe were generated using the Kelsey Centrifugal Jig, and it was recommended that this technique be pursued at a larger scale to verify the results obtained.

Sep 13, 2010

By P McCarthy

Many mining operations developed in the last 15 years have not performed to expectations. Problems experienced include lower than planned development and production rates, geotechnical/stability problems, unplanned dilution, reduced metallurgical performance and unbudgeted capital/operating costs. Most of these problems can be directly attributed to decisions made on the basis of geoscience interpretations and estimates. Recent case studies continue to provide examples of unplanned events linked to the use of geoscience information. These studies illustrate the need to improve the way geological information is used in mine feasibility and operations. Comprehensive assessment of the consequences of inappropriate technical decision making is still rare; however, the information that is reported highlights the significant financial impact on a companyÆs bottom line.

Jan 1, 2006

By Floyd JM, Richardson P

The extension of theoretical and laboratory studies of the roasting of tantalite and cassiterite concentrates from Greenbushes Tin Limited to pilot and semi- commercial plant developments is detailed. A rotary pilot furnace was used to prove the feasibility of the process and a semi- commercial plant was constructed at Greenbushes to produce large quantities of roasted calcine. The additions and conditions of the laboratory study were employed to achieve marketable grades of calcine from the two materials. As well as producing calcines with less than 0.1% Sb, most of the tin in tantalite was recoverable to a separate fume product. Tin fumed during cassiterite roasting on a semi-commerical scale amounted to less than 1% of the tin in feed.

Jan 1, 1986

Industry and Government is littered with computer systems which suffered massive cost overruns in their production and which do not fully meet the expectations and needs of their users. There are many in the computing business who caution that cost overruns of 100% are to be expected and who counsel seriously against accepting an implementation date as being realistic. System development methodologies and "Spectrum" is an example, have been designed to control systems development so the cost and time overruns are prevented. While some success has been claimed, our experience and information from other users indicates that this control is illusory, the first estimates of cost and time are inflated by the control system methodology, and the methodology itself can bury the original system.

Jan 1, 1983

Poorly designed sampling protocols generally result in high project risk by artificially increasing grade variability (ie the nugget effect). Sample collection, preparation and assay protocols that suit the ore type, together with QA/QC systems, will reduce this risk. All reporting codes (eg JORC, 2004) require the Competent Person to consider the quality and implication of sampling and assaying programs. High sampling errors beget higher project uncertainty; despite this fact, sampling does not receive the attention it deserves. The case studies presented show that many sampling issues frequently go unrecognised or unaddressed, resulting in poor project decisions during exploration through to feasibility and production. The overall conclusion is that correct sampling is critical to mining project success and that there is often a need for its optimisation.

Jan 1, 2007

Comalco Aluminium Limited uses a computer system for cost, supply and maintenance reporting and control at its bauxite mine in Weipa, North Queensland. The system collects data on a daily basis at a high level of detail on both cost and maintenance history. This allows useful reporting to all levels of management from the shop floor to the General Manager. The most successful aspect of the system is that the information is available in all workshops on visual display units. This allows the real spenders of the Company's money, Foremen and Tradesmen, to make well informed decisions. The system has also decreased the time taken to find parts and information which gives the Foremana greater opportunity to do his real job of supervision and quality control.

Jan 1, 1983

Sulphide Corporation Pty. Limited operates a Lead/Zinc Smelter at Cockle Creek, some 11 miles from Newcastle, N. S. W . Works effluents totalling some 8, 500, 000 gallons/day join Cockle Creek some 1. 8 miles from its mouth in the most northerly section of Lake Macquarie, The Creek is also the source of the Works cooling water intake of which approximates 8, 000, 000 g.p. d. In view of the wide use of the Lake for recreational activities by the people of Newcastle and the surrounding areas, particular care must be taken to ensure that the control of effluent quality is of a high order. This paper outlines the philosophy and measures taken for the treatment and control of plant effluents discharging into Cockle Creek.

Jan 1, 1971

Optimisation of mining projects is directly related to effective and efficient management of risks through the life cycle of mining projects. Effective and efficient management of risks must include explicitly all aspects of Occupational Health and Safety (OHS) through the life cycle of mining projects. This paper presents a different scale of OHS in the context of the optimisation of mining projects. Meaning of risk through the project life cycle is explained. Complex relationships between numerous risk, safety, knowledge, culture and change variables, and project life cycles are shown. The key element developed in this paper is a multi-disciplinary knowledge base that is necessary for constructive development of risk management and OHS models through the life cycle of mining projects.

Jan 1, 2003

By Quast K. B, Newell R, Caterford J. H

The most common reason for gold-bearing deposits being refractory is the presence of sulphides; in many cases these interfering minerals contain arsenic, antimony, or other environmentally-sensitive elements. A number of processes have been proposed or developed for pre-oxidation of interfering minerals. In most cases developers have focussed on gold recovery and capital costs, with relatively little data on the deportment or form of these potentially harmful elements. This paper surveys recent work connected with pressure pre-oxidation processes. Data from pilot plant treatment of refractory gold materials, using the nitric acid Redox process, is discussed along with the attendant flowsheet and engineering implications. Four refractory gold-bearing materials have also been tested at the University of South Australia for arsenic and antimony deportments.

Jan 1, 1991

Efficient project planning during the detailed feasibility to final engineering stages of a project requires not only the accurate prediction of the grade, tonnes and recovery, but their degree of variability as well. An understanding of the major parameters involved in the grade and tonnage estimates is essential, and the communication to those receiving the results is most important. The personnel involved in the project require more than just a global reserves classification. Quality parameters other than grade should be evaluated as carefully as the estimate itself. This paper does not present any novel ideas to overcome or enhance any of this. Rather, it takes a step back and tries to look at the global picture of requirements for proper project planning.

Jan 1, 1987

By T Galvin

Drilling and blasting at Westside Mine near Wallsend, NSW, has presented a challenge for Orica Explosives, Australia. The colliery produces 600 000 tonnes of steaming coal per year from two seams using surface mining techniques. Tapping into underlying coal will greatly improve the yield, but there are many issues which make this an enormous challenge. Hunter Valley Earthmoving engaged Orica Explosives to supply the explosives products and to provide much of the blasting expertise that is needed on the minesite. Hunter Valley Earthmoving and Orica Explosives have proven to be an outstanding, unified technical team on this project. The success of the team is based on good communication, progressive attitudes, extensive expertise in blast design and most importantly, care and accuracy in implementing the agreed upon designs.

Jan 1, 1999

By Waldram JT

The Kelsey Centrifugal Jig incorpo- rates the principles of operation of a conventional mineral jig, at the same time utilising high centrifugal forces to extend concentration to very fine heavy minerals. The main operating variables which are adjusted to control processing of different types of material are centrifugal force, ragging material and size distribution. Pilot plant trials have been under- taken to examine concentration of a mineral sand in which the heavy mineral particles occur mainly in the minus 0.075 plus 0.032 mm size range. Stage recoveries of greater than 90% were achieved at concentration factors of up to 2, although lower recoveries were obtained with higher concentration factors. A final concentrate containing 65% heavy minerals was obtained.

Jan 1, 1986

A laboratory investigation was carried out to obtain data on the explosive character- istics of selected coals mined in New South Wales. Seven coal seams were sampled and the volatile matter content of the coals tested varied between 28 and 37 percent. A mod- ified Hartmann apparatus with a volume of 1250 ml was used in the investigation. Dust clou' generation was produced by an air blast delivered radially through a mushroom type valve and the ignition source was a-continuous A.C. spark produced by a 20 000 V, 50 mA transformer. The coal dust parameters invest- igated were the maximum pressure developed, the average and maximum rates of pressure rise at dust concentrations between 200 and 1500 3 g/m.

Jan 1, 1981

The geological features of the destructive plate margins of the southwest Pacific favour the formation of porphyry type deposits. The major controlling factor favouring the formation of gold-rich deposits of this type is a dense crust. This results in shallow intrusion of large magma bodies beneath andesite stratovolcanoes. Where the intrusives have near vertical sides, the comparatively low temperature of transfer of volatiles from the solidifying melt favours the partitioning of gold into bubbles of volatiles. They reduce the viscosity and density of the melt, resulting in the upward movement of a mineralised melt. With the drop of pressure with upward movement the bubbles separate into a two phase mixture, triggering freezing of the mineralised melt and the formation of a gold mineralised stockwork.

Jan 1, 1995

By Yokozawa K, Yamamoto T, Kameoka Y

Japan Construction Method and Machinery Research Institute has been conducting various field surveys of tunnel works and other excavation works, and the cost and efficiency of these two excavation methods have been studied. Based on these data, the costs of blasting excavation and mechanical excavation represented by roadheaders were calculated. The costs were calculated and compared for rocks of various hardness. When the total construction cost is considered, the degree of overbreak becomes one of the most influencial factors, because the overbreak area must be filled up with expensive shotcrete in NATM. So, in the next step, the relation between the excavation costs considering overbreak and the rock hardness was studied using the data on overbreak obtained by the field survey.

Jan 1, 1987

By Woodhouse M, Andrews D, Drew G

The nickel deposits within the Honeymoon Well project area (26¦ 40'S, 120¦ 25'E), located 45 km south of Wiluna, occur in the northern part of the Agnew-Wiluna belt (Figure 1; Hill et at, 1990). The project area is covered by up to 50 m of transported material which greatly hampers both exploration and an understanding of the bedrock geology. Since 1990 intensive exploration has increased the resource from 10 Mt at one per cent Ni to 134 Mt at 0.76 per cent Ni in five deposits (0.4 per cent Ni cut-off, resources above 300 m depth, December 1994). This includes a massive sulphide resource of 2.5 Mt at 3.4 per cent Ni.

Jan 1, 1996

By R Fleming, G Jones

An ocean outfall is currently under construction in Christchurch, New Zealand to transfer treated wastewater from the existing treatment ponds at the city wastewater treatment plant to diffusers located 3 km offshore. The New Zealand $85 million project comprises a new pump station and 5 km of 1800 mm diameter pipeline with a design capacity of 6.0 cumecs. The pipeline comprises 2.3 km of concrete pipe installed by microtunnelling and 2.7 km of polyethene marine pipe installed by dredge and lay. This paper describes the consent process, key environmental and community constraints, the tender process, risk provisions included in the contract, the type of contract, partnering provisions, geotechnical design issues and the pipejacking construction activities and issues.

Jan 1, 2008

By Qisu W

The ground vibration produced by the bench blasts of a single hole and a row of two or three holes is recorded in an iron mine. Using the seismic signal generated by a single-hole shot as the source function, we have developed a computer program of a simulating ground vibration by bench blast. The reasonable delay time of blast in the iron mine has been discussed tentatively with the Fourmap invented by Anderson, D.A. The seismograms measured from the single-row blasts of two or three holes have shown the method of simulating vibration is feasible on the whole. For large scale production blasts, a combination of the vibration simulation and the high-speed photograph is used to choose the delay Time.

Jan 1, 1990

This paper outlines the advances made in vacuum filtration as developed by Outomec Process Filters and details the results obtained at a number of Australian installations. The first section of the paper details the technical advances made by the use of ceramic media in vacuum filtration and explains the reasons for the use of the technology. The second part of the paper discusses a number of Australian installations of the ceramic vacuum filter and where possible compares the actual experiences with those predicted from the test work which preceded the installations. The Ceramec Capillary Vacuum Filter is a vacuum disc filter which combines the proven mechanical attributes of a disc filter with exciting new ceramic vacuum technology from Outomec of Finland.

Jan 1, 1991