Search Documents

By Eric Nelson

The paper point out the structural openings and the localization of ore bodies. Structural openings in rocks constitute the primary permeability network for the formation of most hydrothermal ore deposits. The distribution, geometry, density, and orientation of ore bodies in structural openings are controlled by two primary factors: the far and near field stresses and the mechanical properties of rock. When stress controls the orientation and kinematics of faults and fractures in the absence of pre-existing weaknesses, ore shoot orientation is perpendicular to the fault slip vector and can be predicted by kinematic analysis. However, when structural openings form along pre-existing weaknesses, ore shoot orientation cannot always be predicted by kinematic analysis. Because we can classify ore bodies based on the types of geological structures discussed above and the variations that naturally occur from material property heterogeneity, exploration for hydrothermal ore deposits should include analysis of geologic structure and evolution, rheological variations, pre-existing weakness, and fault kinematics to evaluate structuralcontrols on localization of ore bodies.

Apr 22, 2003

By Javier Illanes, Maurice Moore, Felipe Moroni, Rafael Acosta

Any organization that subjects its activities to a continuous improvement process must be able to adequately measure the results of the implemented changes in order to pursue better results over time. This is no different for mining companies. When it comes to blasting, an accurate fragmentation analysis can correlate blast design and rock mass parameters to particle size distribution, enabling us to further analyze the correspondence of specific design patterns, applied to specific rock mass properties and the result in measured fragmentation indicators, such as P80 and fines percentage.

Sep 30, 2022

By Marco Silva

Underground mines are complex environments that require continuous control and monitoring actions in order to have a safe and efficient operation. At Nexa, the goal of achieving "zero harm" promotes the constant search for in its operational processes. Currently, there are manual activities that reduce the agility and precision when working with information from inside the mine, using mostly radio communication and management by sight of badges as an operational standard. This project was born in the context of increasing the operational safety of underground mines, bringing gains to the entire process involving the underground.

Sep 29, 2023

By Marc Leduc

Since co-disposal technology promises to replace conventional tailings disposal methods at sites with high strip ratios or plentiful old dumps. While the mine waste needs to be relatively strong and low in fine material, and chemical compatibility must be assured, when these parameters are satisfied there are no other significant hurdles to its implementation. In this sense, the paper describe the resulting benefits range from substantial reduction in capital and operating costs to reduction or essential elimination of the short- and long-term liabilities associated with tailings dams are impoundments.Since tailings dam failures are arguably the greatest environmental liability and public relations problem in the industry, reducing the quantity of tailings managed behind dams is a worthy goal.

Jul 31, 2003

By Ian Coltrin, Steve Merrill, Dariusz Lelinski, Sudhir Kamath

Froth flotation has been the heart of mineral beneficiation for over a century. Over the years, developments have been made in flotation cell design, size, and in many other aspects of flotation technology. Despite the overall effectiveness of these improvements, valuable mineral particles are often lost along with waste material. These particles are lost when the froth recovery process within a flotation system is not designed for variable froth conditions seen in plant operations. Both the amount of froth generated and the type of froth in a flotation cell change as concentrate is removed down a row of cells. Traditionally, froth recovery has been designed using a froth carry rate averaged over the entire row of flotation cells with a static amount of open area at the top of the cell.

Sep 30, 2022

By J. B. Greenwood

The paper point out some reasons why contract mining should not achieve the same success in Latin America as it has in Australia. In this sense, any reasons are: the size of operation, mining industry employees bonus scheme, the privatization of nationalized mining assets, general sales tax and the mining unions. Therefore, great deal depends on the attitude or "mindset" of a company's employees. lt is strongly my view that the attitude with which a contractor approaches a job will give rise to a superior mindset amongst its employees when comparad to those from most mining companies. The value of this cultural difference is significant and should never be underestimated. lmportantly, it doesnot only manifest itself in a more productive workplace: it is invariably the case in Australia that the safety achievements of contract miners are superior to those generally expected from the mining industry at large.

Oct 6, 1999

By Jerry Rowe

There are numerous examples of historic and recent mines that have no closure system or have poorly designed closure systems. These mines may contaminate water resources, land resources and cause significant impacts to human health and the environment. As a result of these problems, many regulatory agencies around the world require that mine closure systems be implemented to manage ARD and protect water resources. In this sense, the paper discusses some of the key elements that need to be evaluated when selecting a mine closure system. These include the specific site climatic, hydrogeologic, hydrologic and geochemical conditions that must be considered for closure design. Two examples of innovative mine closure systems that have been implemented to take advantage of site specific conditions to effectively manage water are provided. The mine closure systems incorporate passive measures to control ARD (acid rock drainage) and protect water resources.

Sep 21, 2013

By Edmundo Alfaro

"The paper point out about on the use of ion exchange resins for adsorption of gold from ammoniacal thiosulfate solutions. In this sense, the gold can be recovered from ammonium thiosulfate solutions with strong base resins. The amount of gold loaded onto the resin in a batch process is a function of gold concentration in solution, amount of resin, volume of solution, copper and competing ions concentration in solution. Thiosulfate concentration in leaching solution has influence on gold loadings onto resins; in contrast, ammonia concentration in solutions has no influence on gold loadings. Gold seems to be loaded onto the resin preferentially over copper - thiosulfatecomplexes and also over thiosulfate ions. Polythionate ions strongly compete with gold and copper thiosulfate complexes for resin sites. This causes reduction on gold and copper recoveries from the leaching solutions. Even more, polythionates are produced in leaching solutions when thiosulfate is oxidized by the action of both copper and oxygen. "

Jul 31, 2003

By Thomas F. Kerr

The La Quinua mill at the Yanacocha mine in Peru has a thickened tailings storage facility that is contained entirely within an active heap leach pad. In this respect, it is unique and unprecedented in the mining industry and provides the operator, Minera Yanacocha S.R.L. (MYRSL), with certain cost, land-use and closure efficiencies. The combined design requires that the leach ore embankments retaining the tailings provide the same high level of stability and security required of major tailings dams. Contrary to standard tailings dam construction, the leach ore in these embankments is placed in thick, uncompacted lifts so that they maintain adequate permeability for leaching. The resultant loose structure makes static and dynamic liquefaction a critical issue, and the key design principle for avoiding a liquefaction related failure is to keep the ore that is saturated or very near saturated when under leach well removed from the outer faces of the embankments and contained behind large unsaturated structural shells.

Sep 14, 2009

By Todd Hamilton

For mine closure, the prospect of treating mine drainage in near-perpetuity can be onerous – especially when flow rates are high. One closure option is to construct tunnel plugs within the adits to flood the mine and reduce discharge volumes. Flooding reduces oxygen access within the mine and hence ARD potential. It also reduces hydraulic gradients such that uncontaminated groundwater is not drawn toward open, acid-generating areas of the mine/orebody. Evaluation of the technical and economic feasibility of permanently sealing mine tunnels necessitates detailed hydrogeological and geotechnical investigations. The capital costs associated with tunnel plugs may be relatively high, and there are ongoing maintenance requirements, risk of significant leakage and even risk of catastrophic failure if improperly designed or constructed. In this sense, the paper point put the means available for assessing the liabilities associated with adits at project start up, and the options available for closure of existing adits to reduce long-term environmental liabilities.

Sep 12, 2005

By H. E. Wyslouzil

Column flotation technology was introduced to the market place about thirty ago years as a device capable of producing concentrates that were lower in impurities than those produced by other types of flotation machines. The ability to operate columns with significantly deeper froth beds and the provision of a froth washing system were the main reasons cited for the improved metallurgical performance. Column cells are now well accepted by the industry for cleaning applications, but there continues to be considerable skepticism about their use as roughers. There have been several documented cases of rougher installations which fell well short of predicted metallurgical performance. The reasons for the shortcomings vary from case to case, however they can be generally attributed to incorrect sizing, inappropriate application and or a lack of understanding of how column cells must be integrated into an existing plant or new project. Columns may not be the best choice for every application. In this sense, this paper discusses some of the important considerations that designers must take into account when contemplating the use of columns as roughers.

Sep 12, 2005

By Hugh Thompson

In mining today, planning is of paramount importance, even more so when one considers that the business margins are reducing, requiring the evaluation of diverse alternatives for the optimal use of scarce resources. Additionally the capital required to approve some projects demands the best planning possible. Modern planning requires that all of the aspects of the business be represented, and not just the planning of the extraction in an isolated form. In order to carry out integrated strategic planning in the mining business one needs to have implemented a culture within the organisation that allows the business to be understood as a interelated system of processes. These processes must be co-ordinated so that they interact properly between each other and so define an integrated plan that optimises the available resources and maximises the benefit to the company. This defined culture should consider the important variables of each activity within the processes, and its’ relevance to the strategic plan. In this sense, this paper shows an example of computer tools used in order to reach the described objectives.

Aug 25, 2002

By Ken Rahal, Chris Braun

As head grades of mines around the world decline, generation of tailings is increasing. Along with the increased tailings generation, reduction in water availability, and recent tailings dame failures, are causing mining companies to look at different disposal methods. One of the methods that is gaining traction is filtered tailings. Filtered Tailings currently provides the greatest water recovery and the smallest footprint among all the tailings disposal methods. This paper will present two case studies that analyze the filter and air compressor costs associated with a change in the final cake moisture target (i.e. a change from 17-wt% to 15-wt% cake moisture), for a base metal mine and gold mine.

Sep 30, 2022

By Graham Speirs

La minería del siglo XXI requiere que ingenieros, consultores y proveedores brinden apoyo a promotores, desarrolladores y operadores para lograr una extracción y procesamiento de minerales segura, eficaz y con el menor costo posible. Este artículo técnico muestra el diseño, construcción y mantenimiento de un eje vertical, con una forma más rápida, económica y productiva de izar con cables guía, buzones de aluminio y sistemas de izado diseñados con tecnología de vanguardia.

Sep 30, 2017

By Alfonso Núñez

There are many assets on a typical industrial site that are not monitored continuously by a SCADA system or the DCS. Many of these assets are critical and must be running correctly for production to meet its targets. Most companies schedule inspections of these assets regularly by sending skilled operators to the field who take notes using paper and a clipboard. There are many advantages related to the digital transformation of operator rounds. In particular, the collection process is supported by digital prompts and the data — once it is collected — is automatically routed to a database and made readily available to all the software applications and stakeholders that need it.

Sep 29, 2023

The paper point out the way whereby the Canadian gobernment regulates and motivates mineral development. In this sense, its important the role of Gobernment policy in the development of the industry to its a stage. The progress of industry is due to a favorauble political climate which created an atmosphere of trust that has atracted foreing investment. Therefore, Canada's position owes much to sound legislation that recognizes the high element of risk in exploration and development and also the exhaustibility of mineral deposits.

Nov 20, 1969

By John F. O'Leary

The paper review the process the minerals industry and the materials revolution. For a long time, Latin América attemps at industrialization have been attempts in part, by need to important some of the many raw materials that industrial nations must have. However, the industrial sistem may be in for some of the many raw materials that drastic changes would increase the mineral self sufficiency of countries that are industrialized. In this way, the materials revolution would be a boom to Latin America, it would reduce some of the serious obstacles to the goals which all Americans seem to share.

Nov 20, 1969

By Ingrid A. Venegas

Los sistemas de protección pasiva contra incendios son importantes en el diseño de todo tipo de proyectos -particularmente mineros- donde los estándares de seguridad son más exigentes. En este sentido, el presente texto describe la importancia de la protección pasiva contra incendios ya que evita una catástrofe y minimiza los daños materiales como salva vidas. El uso de este sistema desarrolla tres tres objetivos: la creación de compartimentos seguros capaces de contener y evitar la propagación de la llama, gases y humos, la protección de las estructuras, lo que evita el colapso prematuro de la edificación y la extracción de humos, principal causante de pérdidas humanas y la extracción de humos, principal causante de pérdidas humanas.

Sep 1, 2013

By David Lowell

"The paper point out the cycles of metal prices, and cycles of exploration that tend to lag one year behind metal prices. It appears that mergers and acquisitions are likely to continue in the currentvolatile industry environment, and a two-tier industry will evolve with giantcompanies representing the upper tier and juniors the lower. Strategic alliances will become more common, but irregular and inefficient exploration financing will continue unless the majors make a specific and consistent effort to solve this problem, and also show more discipline in balancing metal prices and production levels. "

Apr 24, 2001

By Jordaan Koos

This report looks at the application of Shaft Boring (SB) as an alternative methodology to conventional mechanized Drill and Blast (D&B), Shaft Sinking. Various Continuous Mechanized Shaft Sinking concepts, equipment and projects are also reviewed in this report. Their significance relates to designs and systems related to Shaft Boring. Shaft Boring is increasingly a method considered for the excavation of deep and increasingly large diameter shafts for mines in hard rock. Many methods have been used as an alternative for D&B Shaft Sinking.

Sep 1, 2017