Search Documents

By Randolph A. Koski

Recent investigations located at least six major massive sulfide deposits (dimensions measured in tens to hundreds of meters) within a 50-km-long segment of Escanaba Trough, the sediment-covered axial valley of southern Gorda Ridge. The sediment fill is intercalated silt and sand turbidites and hemipelagic mud with a maximum thickness of 500 m. Several volcanic edifices, spaced at approximately 15-km intervals along the ridge axis, penetrate and locally breach the sediment. The largest sulfide deposits form mounds and ridges on the steep flanks of structurally unstable sediment-capped blocks that have been uplifted above the volcanic edifices; both sediment and sulfide deposits are undergoing rapid erosion and redeposition. Although hydrothermal activity appears to be absent at most sulfide fields, 220°C fluids are discharging from the tops of sulfide mounds near 41°00'N lat, 127°31'W long. Recent pillow lavas and sheetflows erupted onto the sediment-covered sea floor less than 500 m away from the active vent field. The massive sulfide deposits have compositional characteristics that differ from deposits formed on sediment-free spreading axes. The Escanaba Trough deposits include Fe- and Cu-rich, Zn- and Pb-poor massive sulfide mounds, polymetal (Zn-Fe-Pb-Cu-As-Ag-Sb-Sn) sulfide vent structures, abundant barite-rich chimneys, crusts, and sinter cones, and thermogenic petroleum in the sulfide and sediment. Sulfate-rich crusts have high Au values ranging between 2 and 10 ppm. The unusual mineral assemblage at Escanaba Trough

Jan 1, 1989

By Andrea Koschinsky

Ferromanganese crusts have traditionally been considered a potential ore for Co, whereas ferromanganese nodules have typically been considered a potential ore for Ni and Cu. However, both nodules and crusts sequester high concentrations of many metals (Table 1) from sediment pore waters and seawater, many of which are essential for high-tech applications. The resource potential of these rare and valuable metals is poorly known and they are the subject of considerable current research. The need for adequate and dependable supplies of these metals is essential for the development of new technologies. The rare-earth elements have recently received much attention in the scientific and popular press because of their use in so many high-tech applications and because more than 95% of the production comes from China (e.g., Service 2010); consequently, there is concern about the possibility of a significant decrease or even curtailment in exports from China. The lack of a primary source and the inadequate supply of Te have prohibited the development of a Cd-Te photovoltaic solar-cell industry (Hein et al. 2010). Inadequate supplies of many of the elements listed in Table 1 are limiting the development of key high-tech industries, forcing the use of alternative metals that [ ] may result in less efficiency or less favorable properties for a product. The rare-earth elements, Te, and other elements listed in Table 1 occur in high abundances in marine hydrogenetic and diagenetic ferromanganese deposits. Here, we look at the mechanisms by which these rare and valuable metals are incorporated into different genetic types of marine ferromanganese deposits.

Jan 1, 2010

By Ian B. Clark

In October-November 1993, the Centre for Cold Ocean Resources Engineering, Memorial University of Newfoundland and University of Victoria jointly carried out reconnaissance surveys at Pine Cove, Baie Verte, Newfoundland. Pine Cove is the site of a multi-year study examining the environmental impact of a shallow water small-scale marine placer gold mining operation. The reconnaissance survey data collected will be used to develop a multi-year environmental effects monitoring (EEM) program for Pine Cove, Baie Verte, but more generally an EEM protocol for shallow water small-scale marine placer mining, which meets the requirements of Canadian government regula¬tors such as Environment Canada and the Department of Fisheries and Oceans. The Pine Cove mining operation is currently scheduled for the summer of 1995, and will use two mining methods: a hydraulic suction dredge in shallow water (<10 meters) operated by a scuba diver, and a hydraulically actuated clamshell dredge in deeper water (-30 m). A centrifugal concentrator will be used to extract the heavy minerals from the mined marine sediments, and the tailings will be returned to the sea floor via a suspended discharge pipe. The reconnaissance work at Pine Cove included geophysical, geochemical, oceanographic and biologi¬cal surveys, providing data which will enable prediction of the potential environmental impacts of the proposed mining operation. The geophysical surveys showed the sea floor to be covered by varying

Jan 1, 1994

By Jonguk Kim

Hydrothermal sulfides were recovered from the16°50?S triple junction area in the North Fiji Basin, at a water depth of ca. 1900 m. The chimney samples can be divided into three groups according to their major metal contents: 1) type 1 (Fe-Cu-rich), 2) type 2 (Fe-Cu-rich with minor Zn), and 3) type 3 (Zn-rich) chimneys. Type 1 chimneys are mainly composed of chalcopyrite and pyrite, and are enriched in elements commonly precipitated under high temperature conditions (> 300°C), such as Cu, Co, Mo, and Se. Type 3 chimneys consist dominantly of sphalerite and marcasite with traces of pyrite and chalcopyrite, and are enriched in elements commonly associated with low temperature (150 to 250°C), such as Zn, Cd, Pb, As, and Ga. Type 2 chimneys show mineralogy similar to that of type 1 chimneys but their metal contents range between type 1 and type 3 samples. Trace element compositions of basaltic rocks indicate that magma generation in the triple junction area was influenced by two different sources: N-MORB and E-MORB. Sulfur and lead isotope patterns of the hydrothermal chimneys show distinct differences between the type 1 and type 3 chimneys. For example, type 1 sulfides are depleted in 34S and have lower Pb isotope ratios compared to type 2 and 3 chimneys. The d34S values (0.4 to 5.6?) of chimney sulfides are typical range of sulfur isotope composition of sediment free mid-ocean ridge hydrothermal system. Type 2 and 3 sulfides show slightly higher d34S values than type 1 sulfides, which can be explained by subsurface boiling of hydrothermal fluids followed by mixing of saline solutions with ambient seawater. Lead isotope compositions of the chimneys indicate that the Pb in type 1 and type 3 chimneys originates from hydrothermal leaching of N-MORB and E-MORB volcanic rocks, respectively. Considering that both these chimneys are located in the same area, our model suggests that type 1 chimneys formed by hydrothermal circulation controlled by an intrusion of N-MORB magma; the fluids were not influenced by boiling during the formation of type 1 chimneys. In contrast, type 3 chimneys are younger and were formed by hydrothermal circulation closely related to E-MORB magma intrusion at shallower depth. The necessary conditions for phase separation of the hydrothermal fluids that formed the type 3 chimneys might result from changed P-T conditions in a shallower high-temperature reaction zone beneath the hydrothermal venting site. Under these conditions the fluid may cross the two-phase boundary for seawater, ensuring subcritical phase separation. The mineralogical and geochemical properties of these chimneys suggest that type 1 and type 3 chimneys were probably black smoker and white smoker, respectively. Type 2 chimneys might be product of low-temperature replacement of type 1 chimneys, which is related to formation of type 3 chimneys.

Jan 1, 2005

By V. M. Hamza

Analysis of ground and airborne radiometric measurements in the Saquarema region (Rio de Janeiro) provides new insights into the breakdown and transport of mineral aggregates containing monazites, under sub-tropical weathering conditions. The breakdown process, accompanied by loss of low-density clay fractions in weathered materials is considered responsible for the observed patterns in relative enrichment of thorium and uranium along the migration paths of radionuclides. The characteristic features of these patterns provide clues as to the time and distance scales associated with processes of weathering and erosion. It is also possible to determine approximate locations of concentrations of accessory minerals. In this context, we advance the hypothesis that large under-water monazite deposits may be present along the offshore sand banks, in the coastal region of the state of Rio de Janeiro.

Sep 14, 2011

By Alister C. Skinner

The Marine Operations and Engineering section of the British Geological Survey based in Edinburgh, Scotland have, over the last 30 years, developed and operate a series of remotely operated, and powered, seabed coring systems. These systems were initially developed to provide a cost-effective solution to ground truth seismic reflection data for regional geological mapping, where the only solution that existed was conventional and expensive drill-ships. Since the early 1990?s these tools have been used for many other applications in industry and science. Currently the systems can operate in up to 2000 m water depth for 5m seabed penetration and up to 4500m water depth for a specialised oriented core drill which collects a scribed core to 0.8m below seabed. Scientific applications focus on determining the geology of an area and follows pre-determined geophysical interpretations. It usually also follows other coring attempts with non-powered coring equipment which is invariably unsuccessful if the strata is over-consolidated sediments or hard rock. Commercial applications include cable and pipeline route surveys, diamond, gold and base metal exploration, beach reclamation and aggregate materials evaluation. In many cases there is a blend of science and commercial investigation typified by coring in hydrothermal vent areas or carrying out geological coring in a frontier oilfield province. The versatility of the drills allows cost effective and rapid operations in remote and hostile areas where a rapid investigation may be the only one possible in a short weather window. The deepwater operational capability also allows science and commercial assay to be obtained ahead of potential exploitation and allows formulation of scientific theories or commercial project plans based on sound core data. Being mobile and compact these corers may be used from suitable (Dynamically Positioned or Anchored) vessels of convenience and thus provide a cost effective platform for sampling different types of seabed geology on an international basis.

Jan 1, 2004

By L. B. Khershberg

Marginal seas of the Russian Far East constitute the northwestern segment of the Pacific underwater belt distinguished by distinct metallogenic specialization of shelf-extended ore-bearing magmatic complexes and associated polycyclic mineralization. The coastal part of this vast region is known to contain both multiple placer manifestations and deposits, and non-metalliferous minerals. The latter are sedimentary deposits, the products of weathering, which contain re-deposited placer minerals in industrial concentrations developed on the shelf by certain geological processes. The shelf part of the Far Eastern seas is a seawater-filled continental margin. Complex geophysical mapping and drilling from ships of shelf sedimentary thickness and foundation has revealed the units of contemporary and ancient relief accompanied by formation of industrial concentrations of placer gold, cassiterite, titanium-magnetite, zircon, monzonite, and other components at different stages of placer formation. According to the information collected by prospecting by ?Dalmorgeologia? Co. Ltd. and other companies, placer-host structures within trans-placer-concentrating structures (land-shelf) are: shelf-extended river plains, contemporary and ancient shorelines, beaches, drained areas, spits, bars, detritus deficit zones, and terraces and bodies accumulated underwater in the areas where along-shoreline flows unload their detritus. They all could be used as criteria/signs for mapping and targets for placer prospecting.

Jan 1, 2004

By Lénaick Menot, Anne-Sophie Alix, Charline Guérin, Sébastien Ybert, Ewan Pelleter, Florian Besson

Ifremer, on behalf of the French government, holds an Exploration Contract with the ISA for polymetallic nodules in the CCFZ. As part of its exploration activities, the NODULE (2015) cruise was conducted to acquire a 50 m resolution bathymetric coverage of the eastern sectors of the Contract. In 2017, Ifremer initiated an update of the Contract’s mineral resource estimate. Metal grades and nodule abundance were modelled using ordinary kriging. The inferred mineral resource is 436 Mt (wet) of polymetallic nodules at an average abundance of 10.7 kg/m² with a cut-off grade of 7 kg/m². Based on the geological data, seamounts, sedimentary basins and steep slopes contain no nodules. Technical studies of most of the contractors have determined that nodule collectors could not maneuver on slopes above 5 to 10°. Thus, Ifremer has selected a quite conservative slope threshold of 7 % (about 4°) and a backscatter threshold of -29.5 dB to delineate nodule-free areas. This has a significant impact on the resource estimate, as about 54 % of the eastern Contract areas are excluded. Near-seafloor high-resolution mapping and photographic transects, associated with finer-spaced box-core sampling could constitute a next step to better constrain the mineable areas and to get a higher level of confidence in the resource estimation.

Jan 1, 2018

By Delphine Pierre, Jean-Marie Augustin, Anne-Sophie Alix, Charline Guérin, Cecile Cathalot, Yves Fouquet, Arnaud Gaillot, Ewan Pelleter, Carla Scalabrin, Florian Besson

With the world’s growing demand for metals, seafloor massive sulfides (SMS) deposits are now seen as a possible mineral resource that could contributes to secure metal supply for human needs. SMS deposits are characterized by high concentrations of base metals and at some place high contents of precious and rare metals. Since 1977 and the discovery of the first high temperature (HT) hydrothermal vent and its sulfide mineralization and high biodiversity, more than 300 sites are known today. If the exploration strategy for detection of active hydrothermal sites is now robust, their associated mineralization will not (and must not) constitute a potential target for deep-sea mining due to environmental concerns and technical limitations. Recent studies on SMS deposits are rather focused on extinct and buried mineralized sites characterized by a lower biomass. Several geophysical techniques to explore and detect extinct SMS (eSMS) and buried SMS (bSMS) have been developed (e.g. Kawada and Kasaya, 2017; Szitkar et al., 2017, 2014) using different approaches (e.g. regional or local scale; ship-based or using underwater vehicles) with several degrees of success or limitation. Here we present results from acoustic surveys performed on the TAG hydrothermal district during the BICOSE (2014) and LEVE-SMF (2016) cruises and direct observation provided by HOV (Nautile) dives carried out during HERMINE cruise (2017). Acoustic data were acquired using two different multibeam echosounders (MBES): the hull-mounted Kongsberg EM122 (12 kHz, R/V L’Atalante) and the ROV-mounted RESON SeaBat 7125 (400 kHz, ROV Victor) (Figure 1). After processing, acoustic seafloor backscatter data from both MBES provides complementary qualitative results in relation to the seafloor composition. The analysis of the seafloor backscatter data obtained by near-seafloor surveys with the high-resolution 400 kHz MBES shows a clear relationship between low backscatter strength values and areas covered with pelagic and hydrothermal sediments whereas high backscatter strength values are associated to pillow lavas and basaltic scree. Intermediate backscatter strength values are rather related to old and younger eSMS as well as to mineralization on TAG active mound.

Jan 1, 2018

By Jan M. Peter

The Early Norian Windy Craggy massive sulfide deposit is within the allochthonous Alexander terrane of the Insular tectonic belt in extreme northwestern British Columbia (Figure 1). Host rocks are the Middle Tats Volcanics, part of an informally-named volcano-sedimentary succession of mixed graphitic argillites and mafic pillowed and massive volcanic flows and sills of Upper Triassic age (Figure 2) that have suffered only lower greeschist-facies metamorphism. The volcanic rocks are light rare earth element (LREE)-enriched and display a variably developed back-arc subduction signature. Major and trace element compositions of the host argillite show that it contains an appreciable hydrothermal component, as evidenced by low high Fe and Mn contents. These sediments therefore record steady, continuous hydrothermal activity punctuated by intermittent turbidity currents sweeping into the basin. The deposit consists of at least two discrete sulfide lenses (the North and South Sulfide Bodies), as shown in Figure 3, a level plan at the elevation of the exploration workings. Published reserves at 0.5% copper cut-off are 297.4 million tonnes grading 1.38% Cu, 0.08% Co, 0.21 g/t Au and 3.9 g/t Ag (as of December 1991). However, the deposit is larger than this and further drilling is required to delineate it completely. Mineralization comprises massive sulfide, stringer/stockwork, and finely bedded to laminated sulfides and exhalites. Stockwork mineralization consists of sulfide-quartz-chlorite veins with attendant chlorite and silica alteration. Mineralization consists predominantly of massive pyrrhotite andlor pyrite with lesser chalcopyrite and magnetite. Figure 4 is an oblique section through the North Sulfide Body, the most northerly sulfide mass shown in Figure 3, which shows the distribution of the pyrite and pynhotite-rich massive mineralization and the stringer zone. The North Sulfide Body contains appreciable sphalerite, whereas the South Sulfide Body contains only trace amounts. Gangue minerals include quartz, chlorite, calcite, siderite, ankerite, stilpnomelane and magnetite. The minor hydrothermal exhalite sediments are comprised of chert, carbonate, and minor

Jan 1, 1993

By Paul Kennedy, Daniel R. McConnell, Ruth Price

"The underwater search for the passenger aircraft MH 370 produced rare high resolution datasets of the ocean floor of extraordinary size and detail. The survey design and operations were for sole purpose of finding the aircraft debris field. The aircraft was not found in the detailed search area and the survey was suspended. As planned, the data are now being made available to scientists and researchers. The large survey area includes geologic settings that might be prospective for seafloor minerals. A review of the data can provide insights to seafloor mineral prospectivity in the Southern Indian Ocean and is a large dataset that can be used to calibrate object detection for the design of dedicated mineral exploration surveys.Economic minerals in the Southern Indian OceanOceanographic research and scientific drilling cruises have assembled geologic and geophysical data points in the Southern Indian Ocean. These, together with satellite derived bathymetry and gravimetric data, earthquake mapping, and mapping of magnetic anomalies have, even if they lack detail, produced a general understanding of the main tectonic features and plate movements in the Southern Indian Ocean as well as contributed some marine mineral data.The Southeast Indian Ocean Manganese Pavement, a large manganese nodule field south of Diamantina Fracture Zone was discovered in 1970. Dredging and photographic data from the discovery cruise determined that dense nodule accumulations cover 900,000 sq. km."

Jan 1, 2017

By Justin C. I. Baulch

In October 2004 Placer Dome entered into an exploration farm-in agreement with Nautilus Minerals, to explore for Submarine Massive Sulphide (SMS) deposits on Nautilus? PNG exploration tenements. Placer/Nautilus currently holds approximately 15,000 km2 of tenements in PNG waters, either granted or under application, covering all reported seafloor hydrothermal vent occurrences.

Jan 1, 2005

By Thomas Kuhn

The detailed investigation of both active and inactive submarine hydrothermal systems has gained tremendous progress during the last decades because of the increasing usage of remotely operated vehicles (ROV) as well as manned submersibles. Special aspects like the targeted sampling of chimney structures and vent fluids as well as the analysis of zonations of near-surface structures like sulfides mounds was only possible with the usage of such vehicles. However, the availability of such vehicles has been very limited because of the few number of deep-water ROVs and manned submersibles which need both a trained crew and a special research vessel. This was especially true for the German science community which did not have such devices at its disposal until recently. With the ROV QUEST 5 which is based at the University of Bremen (c/o. Prof. Dr. G. Wefer, Dr. V. Ratmeyer) this major drawback has now been eliminated.

Jan 1, 2003

By Virginie Tilot

Recommendations have been drafted following an international multidisciplinary panel discussion organized at UNESCO/IOC by the Académie des Sciences d?Outre-Mer on 15 December 2010 conveyed, according to its mandate, to the French government and to an international pool of scientists and stakeholders. These take into consideration the relevant Provisions of the United Nations Convention on the Law of the Sea of 10 December 1982, the Rio ?Earth Summit? Convention of Biological Diversity of 5 June 1992 as well as the activities and recommendations implemented for the world?s oceans and seas, in particular by the International Seabed Authority (ISA) and the recent reports and scientific works (including those implemented by the ISA Kaplan, Ifremer, COI-Unesco). The recommendations integrate, for one of the ecosystems, the conclusions of the project of the conclusions of an IOC-UNESCO / Government of Flanders project (2004-2010) implemented by Dr. V. Tilot from 2004 to 2010, during which were published three volumes describing the referential state of the polymetallic nodule ecosystem and proposing options for the management and conservation of the nodule ecosystem in the Clarion Clipperton Fracture Zone, NE Pacific Ocean: http://unesdoc.unesco.org/images/0014/001495/149556f.pdf, http://unesdoc.unesco.org/images/0014/001495/149556e.pdf; http://unesdoc.unesco.org/images/0014/001495/149556e.pdf#223

Jan 1, 2011

By Jonguk Kim

Texture and geochemical composition of hydrogenous ferromanganese crust from relatively adjacent three seamounts (OSM2 at 157°35&apos;E, 13°55&apos;N, Lomilik at 161°37&apos;E, 11°42&apos;N and Lemkein at 165°05&apos;E, 9°18&apos;N) near the Marshall Islands in the western Pacific (Figure 1) were investigated in order to elucidate their growth history. These seamounts, located in different latitudes, are along a line that is parallel with the direction of Pacific plate movement. Thick crusts commonly have three or four distinct layers (Figure 2): (1) layer 1, uppermost layer, is black, dense, and has a botryoidal, columnar, or laminated texture; (2) layer 2, overlain by layer 1, is Fe-stained, porous to vuggy and filled with sediment; (3) layer 3, phosphatized layer, is black, massive, dense, and impregnated by CFA, (4) layer 4 shows parallel to undulatory laminated texture and cut by CFA-filled veins. Layer 1 and 2, unphosphatized young layer, are observed in crust samples collected from all seamounts. However, lower part of the crust shows different textures in different seamounts. Both layer 3 and 4 are found in thick crust from OSM2 but layer 4 is absent in crust samples from Lemkein and Lomilik. All the uppermost layers (layer 1) from three seamounts have similar textural and geochemical characteristics. Layer 2 is overlain by layer 1, is porous, partly Fe-stained, and sediment-infilled. In previous studies, layers 1 and 2 have grown in different oceanic environment. Textural and geochemical properties show that layer 1 has grown under relatively higher bottom water activity and lower productive environment than layer 2. Carbonate and detrital materials in layer 1 are not abundant compared to layer 2. Layer 2 can be assumed to have grown under equatorial high productivity zone (EHPZ) while layer 1 has started to grow when the seamount left from the EHPZ.

Jan 1, 2003

By Jan M. Peter

Many massive sulfide deposits and districts around the World contain rocks that are variously referred to as ?exhalites?, banded iron formation (IF), ?Algoma-type? IF, ferruginous chert, jasper, jasperoid, cherty tuff, tuffite, tuffaceous exhalite, chloritic IF or sulfide IF. With few exceptions, such rocks are thought to be (in part) fossil hydrothermal sediments deposited from hydrothermal fluids vented into a submarine rift environment. Such hydrothermal sediments are associated with a wide variety of ancient base-metal sulfide deposits (e.g., Cyprus-, Besshi-, Kuroko-, and Broken-Hill-type deposits), and hydrothermal sediments are commonly associated with some of the largest base metal sulfide deposits in the world. Analogs of ancient hydrothermal sediments can be found around many modern seafloor hydrothermal deposits which themselves precipitate from high-temperature (350°-400°C) hydrothermal fluids. Hydrothermal fluids are quenched on contact with ambient seawater, and most of the metals are immediately precipitated to form the mound and chimney deposits. However, for kinetic and solubility reasons, not all metals and other species are immediately precipitated at the vent site. Fine particles (up to several hundred microns in diameter) of sulfides, sulfates, carbonates, oxides, silica, Fe-oxyhydroxides, clays, and other phases are precipitated from the hydrothermal fluids in the water column above the deposits. These particles or "particulates" are carried upward for several hundred meters in a buoyant hydrothermal plume (which is typically several hundred meters thick) until it reaches a neutral density, and disperses laterally from the vent site. Modelling of plume dynamics has shown that the majority of particulates are deposited by gravitational settling a few hundred meters from the vent site, and Å99% of particulates are deposited within 3 kilometers. However, signals from modern plumes have been detected even hundreds of kilometers from their source. Factors which can affect the morphology of the plume (and the resultant fallout pattern) include: particulate size, shape and density, bottom topography, and the direction and velocity of bottom currents.

Jan 1, 1998

By Francois P. Leroy

In the quest of studying the assigned blocks of seafloor for deep water mining, each member country of the ISA is thirsty for accurate information as to the level of resources available. Manganese nodules represent a large portion of the resources and are as precious as they are hard to locate and harvest. Resolving such challenges is what drives the technology development and yields instruments and products capable of serving this field of research. This presentation will study how manufactures of oceanographic instruments have pushed the technology envelop to in order to transform a collection of sensors and instruments into a seamless and adapted assembly working to serve the researcher and prospector in the challenging field they operate. Deep water data collection is characterized by the following challenges: ? Deployment, recovery and handling of the vehicle ? Producing high resolution at great distances ? Positioning that data with accuracy to relocate Teledyne Marine will present the work performed in its engineering laboratories to produce sub systems and systems now capable of delivering key information necessary to the proper cataloguing and exploitation of deep water mineral mining. Understanding and controlling the alternative resources available to each country will allow better management of current traditional land based minerals.

Jan 1, 2010

By Michael J. Cruickshank

Marine minerals are more than an academic curiosity as they represent the most significant global source of mineral materials for economically and ecologically sustainable development for the future. Minerals research is traditionally carried out by industry and thus, in the United States at least, applied research in marine minerals may not get the share of government funding or attention that more exotic programs for space exploration or future global disasters engender. Two recent events have significantly changed the status of marine minerals. Discoveries made in the last thirty five years indicate that the potential for mineral occurrences in the oceans and seabeds, area for area, is as high as for terrestrial lands. On this basis the global mineral resource base has been recently increased by a factor of four of which three quarters is underwater. The recently enacted Law of the Sea has mandated what is probably the most far reaching re-distribution of natural resources in human history, and has resulted in a peaceful subdivision of seabed jurisdictions between the coastal nations of the world which should significantly affect future mineral markets and the balance of economic powers. Significant applied research efforts are ongoing for marine minerals as an adjunct to commercial production in southern Africa for diamonds; and in many other parts of the world for sands for beach and coastal protection. Forward planing, including research and development activities focussed on future commercial production of metalliferous oxides, continues in Korea, China, Japan, India, and with lesser activity, in the United States, United Kingdom, Germany and the CIS. Annual expenditures for this work amount to millions of dollars. In all cases the environmental aspects of commercial produc¬tion are a significant part of the research. Geologic studies on the occurence and distribution of metal sulfides at plate boundaries continue on a regional basis in the Pacific.

Jan 1, 1996

By Robert G. Ditchburn

Dating seafloor mineralization at hydrothermal centres of submarine arc volcanoes is important for understanding deep-seated volcanic events that can produce deposits rich in base and precious metals. The activity ratios, 228Th/228Ra, 228Ra/226Ra (Bq.Bq-1) and 226Ra/Ba values (Bq.g-1) are used for dating barite- rich seafloor massive sulphide (SMS) in the age ranges 0.3 ? 12 years, 3 ? 35 years and 500 ? 15,000 years, respectively. Thus, the time elapsed to amass an economic deposit and, ultimately, its capacity for sustainable extraction, can be estimated. 226Ra/Ba and 228Ra/226Ra values have been measured in relatively young chimneys that were collected, 1998 to 2006, from hydrothermal sites at Brothers and Clark volcanoes (Kermadec arc) and East Diamante volcano (Mariana arc) to check these initial ratios, essential for calculating ages for older mineralization at the same sites, were not varying significantly. We found that the 226Ra/Ba value for fresh SMS mineralization at the Brothers NW caldera and East Diamante hydrothermal sites have been reasonably stable for 6 years and 2 years, respectively. At both sites, the 228Ra/226Ra value for fresh SMS has been stable for 5 years. This was established from young chimneys where the measured 228Ra/226Ra value could be corrected for radioactive decay using the age derived via the 228Th/228Ra method. However, long-term stability of the initial 226Ra/Ba and 228Ra/226Ra values has yet to be proven. These isotopes of Ra are used as a proxy for better understanding of the transfer of Ba from deep magmas to the seafloor, via the circulating fluids of the hydrothermal system.

Jan 1, 2011

By Freddy Pøhner

The paper describes recent advances in the technology for mapping of the seabed with acoustic instrumentation. These instruments are typically single beam echo sounders, multibeam echo sounders and high resolution sub bottom profiler. For the single beam echo sounders, new features for deep water mapping are described, as well as the possibility for combining investigation of shallow areas with side scan sonar and vertical echo sounding in the same instrument. Multibeam echo sounding technology for deep and shallow water is reviewed, and some new high resolution instruments using dynamic beam focusing is presented. The sediment profiling technology deals with a novel design for high resolution sub bottom profiling, based upon a Mills Cross transducer with resolution as good as 3 degree in its largest configuration and a frequency range of 2,5 ? 7 kHz. Remarkable features of the system are a very high ping rate even for deep water, and the capability to map buried objects or structures by several simultaneous beams. Some results obtained with the first installation on the French research vessel ?Beatemps Beaupré? are presented.

Jan 1, 2003