Search Documents

By James R. Hein

Rodriguez Seamount, located 150 km off the central California coast at the base of the continental slope, was studied using the ROV Tiburon aboard MBARI?s R/V Western Flyer, October 13-16, 2003. Fe-Mn crust and rock samples were collected along the SW flank of the seamount at water depths from 700 to 2100 m; bottom-water dissolved oxygen content (O2) and temperature were determined at each sample site. Fifty-three samples of bulk crusts, crust layers, and surface scrapes (~0.5 mm) were analyzed for 59 elements. Data allow for the correlation of crust compositions with precisely known water depths and seawater O2 measured at the actual site of sample collection. This is the first detailed study of Fe-Mn crust compositions in a region of strong continental-margin upwelling. Compared to open-ocean seamount Fe-Mn crusts, Rodriguez crusts have significantly higher (2-6 fold) mean concentrations of Fe (26.9%), Al (1.65%), Si (13.0%), Cr (82 ppm), Th (64 ppm), and Ag (1.7 ppm); and significantly lower (2-8 fold) mean concentrations of Ca, P, Bi, Co, Cu, Ni, Tl, and especially Te (8.2 times lower). All but one Fe/Mn ratio are >1 compared to <1 ratios for open-ocean crusts. O2 contents (0.35-2.03 ml/L) are nearly perfectly corrected with water depth and elements correlated with one are correlated with the other. The Fe-Mn surface scrapes represent 60-450 ka (mean 150 ka) of growth, whereas the dissolved oxygen contents of seawater represent an instant in time. Assuming that the entire sample set was affected uniformly by oceanographic changes, we suggest that correlation of elements with O2 may reflect oceanographic processes. O2 has a negative correlation with P, V, As, Fe, U, Be, Pb, Cr, Mg, Y, Bi, Te, and REEs (except Ce) and a positive correlation with aluminosilicate-hosted elements (Al, K, Rb, Cs). This later relationship is related solely to water depth, indicating that detritus shed down the seamount slopes accumulates in greater abundances in deeper-water crusts. Si/Al ratios indicate that the detritus includes a large component of biosilica produced by upwelling-mediated high productivity. These observations are supported by positive correlations of aluminosilicate-hosted elements with crust growth rates (range 1.2-13.0 mm/Myr). In contrast, other elements (Sr, Co, Mn, Mg, Te, As, Mo, V, W, U, Ti, Ni, REEs, etc.) are negatively correlated with growth rates. Growth rate has a weak positive correlation with O2. These compositional characteristics indicate that even though low-O2 seawater acts as a reservoir for Mn and associated elements and produces slow growth rates, which would allow for the concentration of elements and surface oxidation processes to occur, the high rate of input of detritus and high bioproductivity ameliorate the strong concentration of most metals. This dilution is significantly enhanced by the doubling of FeOOH in the crusts--the main cause of the generally high growth rates compared to open-ocean crusts. The high growth rates limit the oxidation of Co, Tl, and especially Te on the crust surface, which is reflected by their relatively low concentrations. Within the range of oxygen contents measured, O2 has less of an influence on crust chemistry than does the availability and incorporation of FeOOH and detritus.

Jan 1, 2004

By Akira Usui

The small-scale observations, mapping, sampling, and in-situ experiments have been carried out since 2009 using JAMSTEC ROVs at some model seamounts in the Northwestern Pacific seamounts. Laboratory analysis on mineralogy, chemistry, chronology indicated a continuous slow precipitation since the Middle Miocene, at water-depths 1-6 km, and the modern hydrogenetic precipitation even in the oxygen minimum zones. Thus the variability in abundance and grade of the deposits on regional, small and microscopic scales are determined by geological, geochemical, and hydrological conditions, resulting in the stacked piles of tiny precipitates from the seawaters.

Jan 1, 2018

By Doug Lockhart

The Marine Minerals Technology Center has taken advantage of recent price and performance .improvements in PC hardware and software to upgrade its seismic acquisition system. In the past, single channel, high resolution, seismic data was displayed on an analog plotter and stored on tape. Associated navigation data was logged by hand or on a chart plotter. The navigation and seismic data were synchronized with time so that they could be cross referenced. The Center&apos;s new system uses PC&apos;s for the acquisition of both seismic and navigation data. Off the shelf software products were purchased for each task. Elics Delphl performs the seismic acquisition and processing, and GeoResearch, Inc. Geolink provides the navigation interface. A navigation string is sent from the navigation PC to the seismic PC via an RS232 line. This string consists of a time and location fix, as well as speed and heading data. The navigation string is then imbedded in the header of the seismic record. The Geolink software is capable of monitoring other devices in addition to the GPS used for positioning. Device inputs are attributed to the location data to provide easy construction of a navigation GIs. Currently the Center is logging fathometer data along with the navigation. As a result, a map of bathymetry along the tracklines can be available shortly after completion of the cruise.

Jan 1, 1992

The chemical composition of the nodules varies with the type of manganese minerals and the size and characteristics of their nucleus, but those who have an economic interest have the following composition: Mn 29%, Fe 6% Si 5%, Al 3%, Ni 1.4%, Cu 1.3%, Co 0.25%, Na 1.5%, Ca 1.5%, Mg 0.5%, K 0.5%, Ti 0.2 0.2% and Ba 0.2% (Morgan, 2000; ISA, 2002). The Pacific Rim is an area of abundant occurrence of polymetallic nodules (Glasby et al., 1980; Morgan, 2000). According to these authors, the Pacific sea floor of the Clarion-Clipperton Zone (CCZ) is one of the most interesting areas in regard to the genesis of polymetallic nodules. Their abundance in the ocean floor is very variable, as there are places where they cover more than 70% of the ocean floor. The nodules can be found at any depth, but the highest concentrations are between 4000 and 6000m (Morgan et al., 1993). In studies conducted in the EEZ of the Mexican Pacific are those made within the project "Research on the origin, process and distribution of minerals in the Pacific ocean floor in the Exclusive Economic Zone of Mexico". Within this project Rosales (1989) conducted studies on the origin, process and distribution of polymetallic nodules, finding that a number of processes give origin to nodules, being diagenesis one of the main mechanisms of elements that contribute to the nodules. Besides hydrothermal processes that are carried near the East Pacific Rise at 21° N, inputs are contributing to the nodules metallic elements and sediments, especially in regions close to the dorsal, as a greater influence hydrogenetic processes occurs westward (Rosales and Carranza, 1990). In 1993, after cruise MIMAR II, Carranza and Rosales refer that metals such as Cu, Co, Ni, Sn, Fe, Mg, Pb, Zn and Ba may have a relationship with the East Pacific hydrothermal activity and sea currents carry these metals in solution to the Clarion-Clipperton fracture area, where there are hydrogenic metals sources (Al, Fe and Mn). As result of chemical analysis of Mn, Cu, Ni and Co, polymetallic nodules observed in part of the EEZ of Mexico are possible of potential economic interest (Rosales and Carranza, 1990, 2001; Carranza and Rosales, 2003).

Sep 14, 2011

By Hunsoo Choi, Sung Rock Lee, Ian J. Graham, Ian C. Wright

This is a part of the joint KIGAM-GNS-NIWA 3-year study of ferromanganese modules in the Campbell Nodule Field, east of Campbell Plateau to determine age distribution, growth rates and geochemical evolution in relation to geographic setting. The petrography, chemistry, inferred genesis, and 10Be/9Be dating of the nodules were described in the science report of GNS (Chang et al., 2003a, 2003b; Graham et al., 2003a) and presented at UMI (Chang et al., 2003c; Graham et al., 2003b). The morphology and distribution of ferromanganese nodules were also published in detail (Wright et al., 2005). This presentation is only concentrated on the mineralogy and chemistry of the nodules.

Aug 24, 2006

By Akira Usui, Sayuri Kubo, Satoshi Tokeshi, Shingo Kato, Katsuhiko Suzuki, Teruhiko Kashiwabara

"INTRODUCTIONFerromanganese (Fe-Mn) crusts are a kind of marine chemical sediment composed of Fe and Mn oxy-hydroxides as well as small amounts of clastic sediments, which are ubiquitously found on the surface of slopes of seamounts and oceanic plateaus at depths from 900 to 5500 meters below sea level (mbsl). Fe-Mn crusts contain extremely high concentrations of useful minor metals such as Co, Ni, Te, REEs, and thus are expected as submarine mineral resources. Also, Fe-Mn crusts record the change of chemical compositions of seawater during last several tens million years, which allow us to obtain clues to clarify the paleoenvironmental conditions at the time of its deposition. However, occurrence, chemical compositions, microbial community and growth patterns of ferromanganese crusts are yet fully understood. Hence, a comprehensive study on the genesis of ferromanganese crusts, such as growth rates and enrichment processes of elements, is required to better understand their resource potential as well as their applications to paleoceanographic study.Based on the resource potential of ferro-manganese crust, the project entitled “Next- Generation Technology for Ocean Resources Exploration” was launched as one of the governmental projects to develop the exploration technology based on the scientific research on the submarine resources such as hydrothermal deposits (e.g., a poster by Kawada et al.), ferro-manganese crusts. We have made several research cruise to seamounts in the north-western Pacific such as Takuyo-Daigo and Takuyo-Daisan seamounts (Fig. 1) ."

Jan 1, 2017

By Huaiyang Zhou

It has been long known that manganese nodules occur more or less in some part of marginal seas in West Pacific Ocean. On the other hand, it is difficult to understand their distribution and the genesis as those nodule samples were collected mostly by dredge from the deep basins generally has much higher sedimentation rate than the open ocean. For example, the sedimentation rate in the South China Sea is about three orders of magnitudes than that in region of the Clarion-Clipperton Fracture Zone. In June of 2013, a small seamount (named as Jiaolong Seamount), consisting of southern part and northern part with a distance of about 3 km each other, was visited by DSV Jiaolong/RV XiangYangHong 9. It is discovered that abundant manganese nodules exist only on the surface sediment in the southern part with a water depth of about 3800 m to 3300m, on the platforms nearby an obvious crater where volcanic rocks exposed on the wall. There are no any nodules be observed on the sediment in the northern part of the seamount (about 100 m deeper than the southern part) and surrounding deep basin (approximately 4000 m in water depth). It is speculated that a source of core for manganese nodule and a dynamic sedimentation environment, are two major governors for the growth and distribution of manganese nodule in the marginal seas.

Sep 14, 2011

By Jai-Woon Moon

Lemkein seamount located in the west of the Kuwajleen Atoll of RMI is a relatively samll, simple-shaped, peaked type seamount with its base at 4,500 m and summit at 1,452 m water depths. Ferromanganese crusts were identified in the water depth range between 2,000 m and 2,500 m, and they were mostly observed on the northern slopes of the seamount. Among various substrate rocks, breccia occurred most commonly with crusts and formed the thickest crust layers. Average thickness of the Lemkein crusts was about 5 cm. Their chemical compositions were similar to other crusts found in the RMI area; Mn=25.82%, Fe=15.29%, Co=0.74%, Ni=0.56%. Lemkein crusts were characterized by their four distinctive internal layers; 1) Massive Layer 1; 2)Porous, Fe-stained or sediment infilled Layer 2; 3) Massive to slightly porous Layer 3; and, 4)Massive, Dense, Phosphotized, CFA veined Layer 4. Layers 1 and 2 were generally similar in composition, but highest Co concentrations were measured in Layer 1 while relatively higher concentrations of Al, Rb, Fe, and Ti were observed in Layer 2. Layer 3 showed higher concentrations of Ca and P than Layers 1 and 2. Based on the Co-chronography, the age of Layer 1 is 0¡?6 Ma (growth rate = 1.50 mm/Ma), Layer 2 is 6¡?15 Ma (1.75 mm/Ma), Layer 3 is 15¡?27Ma (1.76 mm/Ma), and Layer 4 is 27¡?45 Ma (2.06 mm/Ma). These preliminary results indicated that high Co contents in Layer 1 resulted from slow growth rates; Layer 2 was formed under relatively strong influence of high terrestrial input; and, Layer 3 was probably affected by a minor phosphatization event occurring in 15 Ma.

Jan 1, 2000

By David S. Cronan

The traditional method of deep sea manganese nodule exploration is to conduct grid survey and sampling on successively finer scales until a suitable deposit has been delineated. Clearly this is both time consuming and ultimately self-defeating if large areas of the ocean floor are to be explored on a human timescale. A conceptual deductive approach would be preferable if one could be found, as it would aim to outline areas of potentially economic nodules on the basis of easily measurable oceanographic parameters. An attempt to achieve this aim in the Central Pacific is outlined below. Nodule Distribution in the Central Pacific Ocean Maps of ore grade nodules in the Central Pacific show that they are confined to two zones trending roughly east-west which are well separated in the eastern Pacific but which tend to converge towards 170-180ºW. They follow the isolines of intermediate biological productivity in the surface waters, strongly suggestive of a biological control on their distribution. Within these zones the nodules preferentially occupy basin areas. Thus they are found in the Penrhyn Basin, Tokelau Basin, Central Pacific Basin, Clarion Clipperton Zone and Tiki Basin. Nodules in all these areas have features in common and are thought to have obtained their distinctive composition by similar processes.

Jan 1, 2003

By Masaomi Kurihara, Seiya Kawano, Norihiro Yamajim, Satoshi Shiokawa, Nobuyuki Okamoto, Hironobu Sakurai

Seafloor polymetallic sulphides are distributed in the EEZ of Japan, including substantial deposits in the Okinawa Trough and Izu-Bonin back-arc basin. In this new frontier, the successful development of these resources in Japan is expected to bring about a new domestic supply of mineral resources. The initial stages of this development are authorized by the Basic Plan on Ocean Policy, approved by the Japanese Cabinet on April 26, 2013, and the Plan for the Development of Marine Energy and Mineral Resources, formulated by the Ministry of Economy, Trade and Industry (METI) on December 24, 2013. In 2008, the Japan Oil, Gas and Metals National Corporation (JOGMEC), commissioned by METI, began a survey and technological development programme for the development of the seafloor polymetallc sulphides (PMS) based on these Plans. The examination of four different fields: the evaluation of the amount of the resource, environmental assessment, mining technology, and processing & smelting technology, are concurrently promoted, aiming for commercialization as soon as possible. Based on the results of research for properties of geomorphology and marine environments of the target test sites in the Okinawa trough, which have been ongoing for several years, the preparation of the pilot lifting test included an in-situ excavation and crushing test conducted using test excavating and crushing systems.

Jan 1, 2018

By Fernando J. A. S. Barriga

Exploration for active seafloor hydrothermal vent fields has been highly successful, and more than 300 such fields have been discovered to date. Some will most probably be mined, given their high metal grades (Cu, Zn, Au and others). However, the current practice detects active systems, and activity rates, not the size of the deposits. This strategy may leave undetected some of the best targets, for several reasons as follows: 1. Large hydrothermal plumes are a measure of dispersion of ore components, not of efficiency in the generation of orebodies; 2. Deposits formed a few hundred years (or more) before present will generally have ceased their activity and will not be detected by plume studies; 3. Deposits formed under a cover rock (up to a few meters of sediments, volcaniclastics, or the like) may exhibit only minor seafloor hydrothermal activity, possibly diffuse flow. Cover rocks will often host hanging wall rock alteration, expressed in geochemical and mineralogical haloes. It has been demonstrated in many instances, especially for deposits formed in the geological past, now exposed on land, that ore genesis under a cover rock is one of the most suitable processes for generating large massive sulfide deposits. One of the great challenges for submarine resource knowledge will be to develop adequate exploration strategies for sizeable orebodies, not necessarily hydrothermal vent fields, sometimes hidden under a cover rock.

Jan 1, 2011

The chemical composition of the nodules varies with the type of manganese minerals and the size and characteristics of their nucleus, but those who have an economic interest have the following composition: Mn 29%, Fe 6% Si 5%, Al 3%, Ni 1.4%, Cu 1.3%, Co 0.25%, Na 1.5%, Ca 1.5%, Mg 0.5%, K 0.5%, Ti 0.2 0.2% and Ba 0.2% (Morgan, 2000; ISA, 2002). The Pacific Rim is an area of abundant occurrence of polymetallic nodules (Glasby et al., 1980; Morgan, 2000). According to these authors, the Pacific sea floor of the Clarion-Clipperton Zone (CCZ) is one of the most interesting areas in regard to the genesis of polymetallic nodules. Their abundance in the ocean floor is very variable, as there are places where they cover more than 70% of the ocean floor. The nodules can be found at any depth, but the highest concentrations are between 4000 and 6000m (Morgan et al., 1993). In studies conducted in the EEZ of the Mexican Pacific are those made within the project "Research on the origin, process and distribution of minerals in the Pacific ocean floor in the Exclusive Economic Zone of Mexico". Within this project Rosales (1989) conducted studies on the origin, process and distribution of polymetallic nodules, finding that a number of processes give origin to nodules, being diagenesis one of the main mechanisms of elements that contribute to the nodules. Besides hydrothermal processes that are carried near the East Pacific Rise at 21° N, inputs are contributing to the nodules metallic elements and sediments, especially in regions close to the dorsal, as a greater influence hydrogenetic processes occurs westward (Rosales and Carranza, 1990). In 1993, after cruise MIMAR II, Carranza and Rosales refer that metals such as Cu, Co, Ni, Sn, Fe, Mg, Pb, Zn and Ba may have a relationship with the East Pacific hydrothermal activity and sea currents carry these metals in solution to the Clarion-Clipperton fracture area, where there are hydrogenic metals sources (Al, Fe and Mn).

Jan 1, 2011

By Timothy F. McConachy

Hydrothermal fluids emanating from the seafloor rise as buoyant plumes, entraining ambient bottom sea water on the way up, until they reach density equilibrium and spread laterally in a direction that is governed by near-bottom currents. Plumes provide targets for focussing exploration for seafloor polymetallic sulfide deposits associated with active hydrothermal vents because their lateral and vertical extent is commonly orders of magnitude larger than the vent field from which they originate. Black smokers can inject on the order of 10,000 µg of particles per liter into a sea water column that normally contains only about 10 µg of particles per liter. The resulting plume should be characterized by increased particulate concentration with respect to background sea water and, therefore, provide a measurable gradient towards the source of venting. By utilizing the ability of particles to scatter light, we employed a real¬time, acoustically telemetered, nephelometer to measure this gradient, and mapped the size, shape and particle concentration of plumes at an active spreading center on the Southern Explorer Ridge at lat 49°45.6&apos;N and long 130°16.2&apos;W. Isopach and particle concentration data indicate the presence of two separate but overlapping plumes. The first is associated with a known vent field called Magic Mountain; the second with a new field called AGOR 171, 1.2

Jan 1, 1986

By Jonguk Kim

Submarine hydrothermal activity and mineralization related to island arc volcanism along the Tonga arc were explored during two research cruises in October 2009 (KODOS 09H) and February 2010 (KODOS 10H), respectively. In KODOS 09H cruise, geophysical survey, including multi-beam bathymetry, marine seismic and magnetic investigations, was performed on 10 volcanoes to find out possible structural discontinuity that can act as fluid pathway for formation of hydrothermal deposits at submarine caldera system. The result provided acoustic and seismic image maps and magnetic anomaly maps of targeted volcanoes. Then, detailed seafloor observation and sampling as well as deep tow side scan sonar survey were performed in KODOS 10H cruise on 5 volcanoes which are selected as targeted areas from the previous cruise. Among 5 targeted volcanoes, TA26 shows most extensive hydrothermal activity. Hydrothermal vents and alteration zone were observed on western caldera and summit of eastern cone of the TA26. Although only weak hydrothermal alteration was observed on eastern cone, mineralized fragments of chimney and mound were sampled from western wall of central caldera on TA25 volcano. On TA12 volcano, strong hydrothermal plume and alteration zone was detected during video tows operated between SW scoria cone and small ridge. However, only small amount of hydrothermal altered rocks were collected from TA12. Although hydrothermal activity and mineralization might be formed, supported by plume detection and result of geophysical survey, only weak alteration zones were observed on other two volcanoes (TA19 and TA22). The exploration area generally show shallow depth up to several tens of meters on summit where subsurface boiling of hydrothermal fluid might occur due to low hydraulic pressure, which can affect on styles of hydrothermal venting and mineralization process observed on Tonga submarine arc volcanoes.

Jan 1, 2010

By I. Yu. Melekestseva, V. V. Zaykov

Paleooceanic structures of the Urals fold belt contain different volcanic-hosted massive sulfide deposits of the Urals, Kuroko and Cyprus types [Prokin, Buslaev, 1999]. Small Cobearing massive sulfide deposits, as Ishkinino, Ivanovka and Dergamysh, associated with ultramafites of the Main Urals fault, are less known. Interest to them had arisen after discoveries of the modern “black smokers” associated with ultramafic rocks of the Middle-Atlantic Ridge (MAR). Ores of the Urals deposits are enriched in Co (0.3 %) and Ni (0.6 %) that are concentrated in Co-Ni-Fe-sulfides, sulfarsenides, and arsenides. Ores also contain the increased gold contents – 3–6 ppm and up to 16 ppm in those saturated with As-bearing minerals. The aim of the paper is a comparison of precious metal mineralization in ores from the Paleozoic and modern ultramafic-hosted massive sulfides.

Aug 24, 2006

By Jeremy Spearman, Alan Cooper, Mark Lee, Jon Taylor, Michael Turnbull, Neil Crossouard, Bramley Murton

"SUMMARYSeamounts are underwater mountains caused by volcanic activity. They are of great oceanographic interest because of their local and basin-scale influence over ocean systems, their often unique ecosystems, and because they are associated with the formation of ferromanganese (Fe-Mn) crusts. These crusts are of particular interest to scientists because they are rich in some of the rare elements increasingly required for development of renewable technologies. When the possibility of mining such seamounts is considered, an inter-disciplinary study of seamount hydrodynamics, crust formation and ecosystem sensitivity is required. MarineE-tech is one such multi-disciplined project that has been commissioned to address these different aspects in order to improve understanding of the viability and desirability of mining Fe-Mn crusts. This paper describes a key part of this study, namely the development of a model, informed by hydrographic observations, of the currents around one such seamount and the in situ validation of a sediment disturbance plume model as a pre-cursor to assessment of the potential effects of mining activity.INTRODUCTIONFerromanganese crusts are thought to form by precipitation of iron and manganese oxides from oxygen depleted mid-water known as the oxygen minimum zone (OMZ). Oxidation rich waters, typically at depths of about 800-2200 m (Hein et al, 2000). This range of depths coincides with the flanks and summits of many seamounts. The ferromanganese crusts found on seamounts have been found to have high concentrations of rare elements, like Tellurium, that are considered critical to low-carbon energy production. Seamounts are complex environments: in terms of the local hydrodynamics that tend to trap water over the seamount due to the Taylor Cap effect (e.g. Chapman and Haidvogel, 1992) and which can enhance the productivity of seamount waters through upwelling (Lavelle and Mohn, 2010), in terms of the microbiological activity that leads to the precipitation of the Fe-Mn crusts, and also in terms of the often unique ecosystems that are the product of the “island” nature of seamounts and the upwelling of nutrients. The understanding of this complexity is a necessary journey towards the realization of viable, yet environmentally responsible, mining schemes. The formation of crusts will be influenced by the local (and larger-scale) hydrodynamics. The exploration of promising crust sites could be made much more efficient by understanding where the most prospective deposits are likely to occur. Knowing how to remove these crusts without impacting significantly on the local environment will be a pre-requisite for such mining to be acceptable to the public and funders alike."

Jan 1, 2017

By Hunsoo Choi

Internal textures of manganese nodules from Clarion-Clipperton zone of northeastern Pacific Ocean are classified into five textural zones: columnar-textured layered zone, cuspate-textured layered zone, cuspate-textured massive zone, cuspate-textured porous zone and massive- textured massive zone. Vernadite is the main constituent mineral in the columnar- and cuspate-textured layered zone. Buserite sometimes occurs in the cuspate-textured layered zone. The cuspate-textured massive zone is mainly composed of buserite. Todorokite is also associated with buserite in the massive-textured porous zone, where cuspates and globes are partially replaced by massive texture. In the massive-textured massive zone, todorokite, buserite and birnessite occur together. The analyzed elements of all zones are also classified into four elemental groups by the cluster analysis of correlation coefficients: Mn group, Cu-Ni-Mg group, Fe group and Si group. Mn group consists of Mn and K. Cu-Ni-Mg group consists of Cu, Ni, Zn, Mg and/or Ca, Na. Fe group consists of Fe, Co, Ti and/or Ca, P. Si group consists of Si and Al. Each textural zone is composed of three or four elemental groups. These four elemental groups are correlated with mineral composition, such as, Mn group with todorokite, Cu-Ni-Mg group with buserite, Fe group with Co-bearing iron-oxyhydroxide minerals, and Si group with silicates.

Jan 1, 2002

By L. B. Khershberg

According to geochemical specialization, cobalt-manganese crusts (CMC) of the Magellan Seamounts are rich in cobalt and manganese and are complex in composition. Besides cobalt, manganese, and nickel, they contain such components, as platinum, copper, molybdenum, and rare earth elements, which enhance the value of this material. Factors and conditions responsible for Co-Mn ore-genesis and processes of cobalt-manganese crust formation are described in a number of Russian and foreign geological papers. The study of ore-concentrating processes in the Magellan Seamounts helped to solve an important applied problem, namely to reduce the time needed to reveal the factors of CMC formation mechanism. The authors of this research found seawater over the described area of Magellan Seamounts to be stratified and to contain high concentrations of manganese, iron, cobalt, nickel, copper, lead, and zinc. Diagrams of suspended Co, Mn, Ni, and other components in seawater (0-5500 m), as well as medium concentrations of basic elements (Co, Mn, and Ni) in ore deposits of metallogenic levels of Magellan Seamounts, were found to coincide both on guyots and abyssal plains. Detailed geological study of guyots in the Magellan Seamounts (Dalmorgeo, IOAN, Roskomnedra, and others) revealed that medium Co-Mn crusts cover bedrock rocks in narrow ribbon-like bodies along the edges of bathymetric intervals 1300-1600 m, 1400-2000 m, 2000-2500 m, and 2500-3000 m.

Jan 1, 2004

By Brian D?Olier

Much of the aggregate that is being exploited at present from these areas is a ?relic? deposit. It was originally eroded from primary source rocks and transported to a depositional centre by processes that are now either greatly reduced in effectiveness or are largely absent at the present time. Following the retreat of the Devensian ice sheet, the subsequent rise of sealevel and the drowning of large areas of the continental shelf along with the lower reaches of many rivers, a fresh sequence of sediment sources, pathways and sinks now exist. Sediment is being eroded from several, pre-existing source areas and transported along different, well - defined pathways to a number of new depositional sinks. Some of the present, licenced, aggregate dredging areas lie close to these sources, pathways and sinks with the consequent dredging activity being perceived by some as interfering with the ?natural process? that links the offshore and the coastal / littoral zones. With this perception in mind, the principal, sources, pathways and sinks between Flamborough Head and Beachy Head will be highlighted and the relationship of dredging activity upon them, evaluated. It will be demonstrated that offshore dredging activity has no effect upon supplies of sediment to coastal beaches.

Jan 1, 2004

By Peter Halbach

Within the frame of the German-Indonesian cooperative Bandamin research project two short cruises (7 station days each) were carried out which led to the Flores-Banda basin located north of the active volcanic arc. This basin is part of a large island-arc subduction-collision system resulting from a complex plate tectonic situation in which three major plates collide with each other. The eastern part of the Sunda-Banda convergent margin also includes the transition from subduction of oceanic lithosphere to collision of the Australian continental crust with the arc. This transitional part is cut and displaced by various large obliquely striking fault systems. Thus, the south eastern and eastern arc segments represent geological conditions which are suitable for the development of hydrothermal convection and potential mineral precipitation. Our study area lies north of the transitional section between Flores and Wetar. We started with a high-resolution bathymetric mapping of 240 km2 in a region some 36 km north of the island of Lomblen. A small submarine neovolcanic ridge was discovered striking approximately NW-SE and consisting of several submarine volcanic structures. In the northwest of the study area, the active subaerial Komba Volcano (Batu Tara) marks the youngest continuation of the ridge system examined. From the ridge we collected fresh and hydrothermally altered volcanics with disseminated sulfides (pyrite, pyrrhotite, markasite, and chalcopyrite), together with ferrugenous gossans.

Jan 1, 2004