Search Documents

CHAIRMAN LITTLEJOHN: Some of the members will want to question Mr. Farnham on some of the things he has brought tip, so we will throw the meeting open for discussion. I am quite sure Mr. Farnham will be willing and glad to answer any questions that may be put to him. MR. HOLMAN: I would like to ask Mr. Farnham a question in regard to the Duckbill: How wide a face will it operate without moving the bill? MR. FARNHAM: The Duckbill is a device that was developed in the Union Pacific Mine at Rock Springs, within the last few months, and it is shaped something like, a dustpan, with discharge throat in the rear. They made one seven feet wide and found it was too wide, and the one they are using now is between three and four feet in width. The front section of the conveyor, which attaches to the duckbill, meshes into it to form a sliding section, and the front end of the Duckbill is pushed by the upper segments. I saw one used in a room twenty-four feet wide, and they drew it back after they cleaned out one room and pushed it forward again. MR. HOLMAN: You have no arrangement other than ratchet work? MR. FARNHAM: The ratchet is for forward working and back; the sections are made 12 or 13 feet long, and the stroke of the conveyor automatically works the ratchet; they can ratchet it back; it is a hand device. MR. HOLMAN: They just swing the end of the conveyor across the face to pick up the loose coal? MR. FARNHAM: Yes; they are also planning to use it endwise along the panel face, that and the room work both are quite new in their application, and I do not think the Union Pacific is giving out any results as yet, because the system has not been in use long. MR. HOLMAN: We are planning on putting one in very shortly. MR. HALL: I understand they can swing it over 30 degrees one way or the other, and it goes the same way easily because of the continual jar of the back and forward motion on a 60-degree swing. SECRETARY SHUBART: Take on a comparatively long conveyor, you can get quite a sweep, a large part of the circle. The Duckbill could command quite a large range. For a 12-foot entry, take a four-foot wide advance through the middle of the shot coal, with a 12-foot advance, ratchet back, swing the Duckbill to the rib and repeat; but I do not think they could get as much as 60 degree. on the end of the Duckbill without curving further back. The conveyor is light and not normally set on any permanent foundation. I saw one of Mr. McCarty's first machines, a rather rudimentary one, clean tip a 12-trot entry, 21 tons of coal, in 16 minutes, three men at the face and one at the loading end. MR. FARNHAM: The average time to clean the entries is about an hour-to clean up good-it wouldn't take but a short time; that is why they get this record of several cuts a shift. CHAIRMAN LITTLEJOHN: Are there any other questions you would like to ask Mr. Farnham? MR. HOLMAN: We were discussing this entry driving in regard to the entry loader; an entry loader in advance work, just what you have to do to place the jackbars with the sheave-blocks? Do you dig along the ribs after the coal is shot or do you have any other scheme that could be worked out to a good advantage? MR. FARNHAM: This record is a report I have just received from our Chicago office, without the full details, which I have written for. I am sorry I cannot give you the details. This was an Indiana or Pennsylvania mine, near Pocahontas, not the one where they had an accident. I assume they set the jacks ahead and swung and dumped the coal partly out with a scoop and partly by hand, but the application for that for entry driving is entirely new. The reports stated that they anticipated using that as a standard method of entry driving in the future. I will be glad to see that you get a copy of it when I get the report completed. MR. MONAY: Mr. Shubart, did you say they loaded 12 tons in 16 minutes? SECRETARY SHUBART: Twenty-one tons. MR. MONAY: How long did it take to change the machinery out of there

Jan 1, 1926

By Michael A. Berdine

Twentymile Coal Company?s first longwall face in the late 1980?s was oriented approximately 45 degrees to the major coal cleats and 45 degrees to the primary horizontal stresses. This combination of stress and coal cleating resulted in frequent violent bursts of coal along the longwall face. The bursts created particles of sufficient size and force with the potential of causing injury to employees and occasional damage to shield components. Partial web cutting was subsequently developed in an attempt to relieve the stress on the coal face and required the shearing machine to travel to the tailgate and back for a full 36 inch web. The partial web cutting pattern is focused on first cutting the lower 90% of the seam to relieve the stress as the shearer travels from the headgate to the tailgate. The web depth during the headgate to tailgate pass is typically in the range of 70% to 80% and varies with conditions to maximize production rates. The top and bottom of the seam in the remaining 20 to 30% of the web are then cut out to allow the shields and face conveyor to advance. 100% of the web is cut at each gate end for a distance of approximately 19 shields. This paper addresses some general mine geology and the procedures and benefits of partial web cutting with respect to safety, production and maintenance on a high production longwall face.

Jan 1, 2004

MR. GERALD ALLEY (C 11 i e f Draftsman, C. F. & I. Co.) : This invention is primarily intended to correct anything that goes wrong with the fan and any conditions in your air current underground which do not produce a change in your fan water gauge

Jan 1, 1925

Mr. Shepard's paper was unfortunately delivered extemperaneously so no record is at hand. He spoke most interestingly and at length on the oil shales of Colorado, giving his opinion as to the ultimate outcome of the oil shale industry. He explained his idea that it would be built up of comparatively small plants, each of which would make the crudes, or more exactly would roughly divide the crude into its fractions, piping or shipping the fractions to a Central Refinery, using the residue for fertilizer, as it runs very high in fertilizer salts. He recommended that this plan be taken up by Coal Producers, that they consider the possibility of breaking up coal and selling its more refined products in place of selling raw coal. He spoke at length of the various outlets for products of distillation. Mr. McDermott gave a very interesting talk later on work that is being done in the Northern Colorado field along these lines. Mr. McDermott mentioned the strange fact that coaly materials such as mother of coal appeared to give just as good or better results under distillation than did lignite coal. Messrs. Randall, Howe, Goddard, Danford, and Nash added interesting data covering the use of pulverized fuel, and this data will be collected and offered to the Institute later in the form of a paper. Mr. Young spoke of the use of powdered coal in small units for small plants, mentioning the system now being offered by an Eastern Iron Works for small heating plants.

Jan 1, 1922

Our next speaker this afternoon is a good friend of mine of some years. I must introduce him by way of a little story. Now Harris Sherman, many of you know because he was really in charge of everything to do with the mining industry in the State of Colorado for a good many years. Some of you may know that before he became part of Governor, Lamm's first cabinet as Director of Department of Natural Resources, he was an attorney for the Environmental Defense Fund and that caused me considerable panic as I think it might have caused some of you. I have observed Hams from the time he stepped into that office until he retired from that office to go into private practice as the senior partner of Arnold & Porter's Denver office, one of the , nation's most prestigious law firms. Hams is a Colorado native. He's lived here all of his life. He's a graduate of Columbia Law School for his law degree and a graduate of Colorado College down at the Springs for his BA. He has served in state government, but I thought it might be appropriate, since he is no longer in state government, if we used Harris, today, to tell us from a former state official's perspective what the image is of the coal industry from the seat he held in Governor Lamm's cabinet for a good many years. He has been the recipient of a number of honors that I think you should know about including Phi Beta Kappa and

Jan 1, 1982

The Sixtieth Regular Meeting of the Rocky Mountain Coal Mining Institute convening at the Stanley Hotel in Estes Park, Colorado, was declared in session at 10:10 a.m. by Past President Mike Zakotnik, Jr., General Superintendent, The Kemmerer Coal Company, Frontier, Wyoming. Mike introduced Claude P. Heiner, President, Minerals and Development Corporation, Salt Lake City, Utah; and President of the Rocky Mountain Coal Mining Institute. President's Address Members of the Rocky Mountain Coal Min- ing Institute, guests, visitors and friends: I feel this is a distinct honor to talk to you on the occasion of this 60th regular meeting of the Institute. I once assumed this would be the Institute's 60th birthday, but later found that the first meeting was held in the State Capitol at Denver on November 12, 1912, at which time a comparatively small group of operators duly organized the Institute; a Mr. Weitzel of Colorado Fuel & Iron Company was then elected president and our late and dearly remembered Fred W. Whiteside, whose wife Gussie now carries Fred's work forward, was elected secretary. From Fred's records, early meetings were held semi-annually at rather irregular intervals, so that this 60th meeting is approximately the 52nd birthday of the organization and I am number 44 to serve as president. This latter development, I am sure, was conjured up last year by certain members at Glenwood Springs when I was absent. Anyway, I am honored and trust 'that these sessions will be both interesting and instructive in helping us on our way in the coal business.

Jan 1, 1964

By J. L. Floyd

The Trapper Mine is a large surface coal operation located in northwestern Colorado US. The coal seams at the mine dip an average of 8 degrees so, historically, their dragline pits have been orien-tated parallel to the dip of the coal seam to balance stripping ratios. However, the mine plan in the future G and Z pits is designed to take advantage of pit orientations that are parallel to the strike of the coal. During the initial presplit and cast blasts in G pit, significant slope damage occurred. This damage included the opening of joints and tension cracking. There was also block movement directly above the L coal seam, which is the main plane of weakness in the slope. A detailed site evaluation was conducted to develop specific blast design modifications to protect the slopes during future blasting. The modified de-signs successfully controlled vibration levels during the blasting of the Z pit box cut. This paper includes a review of the blast vibration related factors that influence slope stability along with a detailed discussion of the field tests and design modifications developed.

Jan 1, 2004

The twenty-ninth regular meeting of the Rocky Mountain Coal Mining Institute was called to order at 11:30 o'clock a. m., Monday, May 26, 1930, President B. W. Snodgrass presiding: PRESIDENT SNODGRASS (condensed report): The meeting will please come to order. As President of your Institute, I take pleasure in welcoming you to this convention, and to those who come from outside of the city, I take pleasure in Welcoming you to the city of Denver. This is the first convention at Denver in fifteen months. I hope that the annual rather than the semi-annual meetings will prove satisfactory to all, and that no mistake has been made in that respect. We are gathered together here to discuss problems common to all of us, and I am sure that we will profit by such discussion. We have with us, outside of the membership of our organization, representatives of two other organizations, Mr. Callbreath of the American Mining Congress, and Mr. Huntress of the National Coal Association. We will be honored by having them with us, and we shall expect to hear from them during this meeting.

Jan 1, 1930

H. C. GLAZE: There is no question in my mind that the day of direct current distribution is practically ended so far as large coal properties are concerned. Another thing that Mr. Drennan touched on that is of the utmost importance, is that of voltage-voltage to the various pieces of equipment inside the mine. You all know how expensive it is to have motors in operation in important places where the voltage .is about half that which the motor should have. This is particularly true in the direct current system. It slows down production, causes burnouts and destruction to apparatus, and is a question that you men have got to go into. It costs a great deal of money, as Mr. Drennan pointed out, to take care of this. The wires are large and cumbersome, while; on the other hand, with an alternating current system you can use a minimum amount of wire. We have installed this class of equipment with so-called "pick-proof" cable of 2,200 volts down slopes, and I have never heard of any trouble whatsoever from this cause.

Jan 1, 1923

By Edward Bottomley

Mr. Chairman and Gentlemen: I tried to get Benedict Shubart to have some fellow-some big fellow with a big voice-to read this paper for me, but he said there was nothing doing; [ ] that I would have to read it myself. I will try and not take up too much of your time. It is a pretty big subject, Mechanical Loading, and it covers a good deal of ground. I have merely touched on the high spots, as it were. A great deal has been preached and written in the last year or so about mechanical loading, and I doubt if any other subject in the mining industry has been discussed so freely and as often in the last few years. It is not the intent of this paper to dwell on the merits or demerits of any [ ] particular type of loader, that is, to say what the writer thinks is the most efficient or most inefficient machine. There are several types of loaders on the market to-day that are proving very successful in many mining districts. Some of these, five or six years ago, seemed to be a miserable failure from every standpoint, mechanically

Jan 1, 1926

The Institute thanks the following for their invaluable assistance, not only in assisting of the planning and organizing for the Vail meeting, but also for their tireless effort in transcribing, editing and processing the various speeches for these proceedings: Elizabeth Sturges-Murray Executive Assistant to the President Western Mining Operations W. R. Grace & Co. Jacklyn Grove Office Supervisor Mining Division W. R. Grace & Co Donna Hollister Further, the Institute announces the appointment of Doris G. Finnie as Secretary-Treasurer. Formerly Office Manager of K&P SALES ENGINEERS, INC., Doris has assisted for the past 15 years in registration for RMCMI. The Institute has opened an office at 777 Nile Street - Suite C Golden, CO 8040 1. Phone her at 3031278-1912 with any changes, corrections or suggestions.

Jan 1, 1982

The Annual Business Meeting of the members of The Rocky Mountain Coal Mining Institute held during he 84th Regular Meeting of the Institute was called to order by the president, H. Dean Jacot at 11:30 a.m Tuesday, June 28. 1988 in Peak Room 5 of Beaver Run Resort at Breckenridge, Colorado. Twenty three were present and a quorum was established. The president stated the purpose of the annual meeting is to inform members of the status of the affairs and activities of the corporation during the year. It was moved by Loren Linville, seconded and carried to approve the minutes of the previous meeting as published in the 1987 Proceedings. The chair called for reports of the various com¬mittees and these reports will he placed on file in the RMCMI office. Bylaws and Resolutions. Chairman Loren V. Linville reported there were no bylaws revisions. He further reported that the Board had adopted two resolutions: (I) Noting the passing of members since the last convention-Richard T. Brownrigg. Don A Dewey, John T. Maulshy. Hugh D. Nyquist and Mike Zakotnik. (2) Recognizing the superior skills of J. Brett Harvey. RMCMI Vice President of Utah. For recruiting 26 new members from the State of Utah and named him as #1 Recruiter in the Institute?s 1988 membership drive. Linville further commended the Executive Secretary officers, chairmen and committees loran excellent job in planning the 84th Regular Meeting and convention. Membership. In the absence of chairman Ed Sullivan. the secretary reported there are currently 718 active or dues paying members, 51 Life Members and 250 delinquent in dues payment. In the 1988 membership drive. 132 new members have been recruited and 74 of them attended this convention making up 27V, of the total attendance. Patrons of the Institute. This report was given by the secretary for chairman Ira McKeever. A total of 124 plaques has been prepared during the low year life of the program. It has been culled to 119 possible donors as some firms have gone out of business or consolidated. Of this number 46 renewed their annual $100 donation and three new Patrons have joined prior to the convention for a total of 49. During the convention. four new Patrons donated $100 each. tour former Patrons pledged $100 each and seven would be-new Patrons pledged $100 each for a total of 15. This would bring the grand total to 64 if all pledges are received prior to the close of this fiscal year as opposed to 59 renewals in 1987. Program. Co-Chairman Pete Nielsen announced the convention program theme "Broadening OUR Horizons" was well received despite the loss of three speakers during the final days prior to convention. Because the remarks of the Monday luncheon keynote speaker ran over the first time-to-be-tried Monday afternoon Poster Session was delayed almost an hour in beginning. This well thought out feature will he run again next year but in a different time frame. Nielsen thanked his co-chairmen, Bill Balaz and the Poster Session chairman Marcie Greenberg. Publicity. Chairman Tom Egan reported three newsletters including the convention newspaper were sent members during the year. He and Bob Jacob of Bob Jacob Public Relations were at registration daily to secure business card ads and to solicit advertising for the Proceedings. Scholarship. Chairman Keith McGinnis reported that six of the seven scholarship recipients were present at the convention. The University of Arizona at Tucson was added this year and it was the only university visited this year by the chairman. Each scholarship recipient was introduced to the membership at the Monday morning Welcome Session, presented a plaque and responded. The input Iron each winner was most favorable to the program. Each was appreciative of the many contacts made and the educational seminars and programs. McGinnis noted that the mining engineering department at the University of Wyoming may be dropped during the coming year. Joe Dunlap suggested that every member rally support of this department. Scholarship Award Winners: (top) Christine Gorrell-WY, Brian Memmott-UT and Andrew Kuchera-ND. (bottom) Anthony Bowler-AZ, LaVerne West-NM and Steve Newman-MT. Convention Committees Arrangements. Doris Finnie presented the following report: "In addition to the usual arrangements for this or any convention, there were others made for Special Events which included a Sunday historical tour and luncheon for 40, a Monday morning fashion show attended by 70 women. an afternoon scarf tying program for 47 with RMCMI red

Jan 1, 1988

PRESIDENT PRYDE: I am sure we have all listened with interest to the presentation of this subject. Anything that promises economy in coal mining today is welcomed by all of us. We will now have a discussion on this paper. If any of you gentlemen want to ask any questions, you may do so. I think we will develop something of interest and along the lines of economy. That is the first consideration of a coal mining man. MR. H. D. RANDALL: It is an interesting fact that in manufacturing we find the greatest economy results from giving a man the simplest possible act to perform, while there is nothing too complicated for a machine. If we want to put up a set screw we find it cheaper to let one man set it up and the other screw it in. The maximum economy is what we are after. Similarly, one of the points of greatest interest which Mr. Ickis has emphasized, is that this automatic equipment not merely dispenses with a manual operator, but also performs certain functions which the operator cannot do. It provides an inherent protection to the apparatus and service not possible under manual operation. We very rarely have cases of failure with these automatic equipments, .and consequently have the advantage not only of having eliminated the operator's salary, but also his mistakes. We have had a large number of these equipments in use for several years, so that their practicality is now thoroughly proven, and the trend of practice now indicates that the automatic idea will be further extended and will become universal for such classes of service. MR. D. C. McKEEHAN (Union Pacific Coal Company) : My notion of an automatic sub-station is one that does not necessarily require new equipment beyond the control equipment; so that any of you that are interested in it can take up with the manufacturers and find out how much it would cost to change any equipment. The greatest point I think is the fact it eliminates the several nationalities from operating the set, either on day shift or night shift. They can so lock the control as to make it impossible for anyone to start or stop it, except the one who has the authority. Another point I do not believe was brought out very clearly: It would be particularly advantageous to people who buy power, and if you could have several sets in parallel, it would allow you to start the shift with one set and cut in the additional sets as the shift progresses. There are various operations that stop at the end of each shift, and-one or two or three sets can be cut out, leaving the load on one set, providing the size of the copper is sufficient to supply all the points of the mine. Another point I want to bring out: In case you have quite a number of sets distributed along transmission line, the switch trips, the operation restores the service, and you may have several hundred-or in case with us, we would have several thousand-K. V. A. of Motor Generator Sets and Rotaries, that would be starting at once, and the switch would automatically trip out again. MR. RANDALL: Another form of control was described as the so-called supervisory control. This control could be started up so the starting would not be synchronous, but could be spread out over a sequence. MR. McKEEHAN: I think that is rather a theoretical consideration for coal miners. They are standing at the controller ready to shut it off unless there is some selective method of starting various sets- MR. RANDALL: I had in mind this supervisory control, one man, a central operator who would determine which station should start and he would take time enough to have his load come on gradually. He would not permit all the installations to come on simultaneously, but come on in succession: MR. McKEEHAN: You misunderstand me. Suppose we had the main switch at Rock Springs, which supplies several camps, and there are several

Jan 1, 1924

FEBRUARY 26TH. MORNING SESSION: The sixteenth regular meeting of the Rocky Mountain Coal Mining Institute was called to order in one of the private dining rooms of the Albany Hotel, Monday morning, at 11 o'clock, with the President, F. W. Whiteside, in the chair, one hundred and one members being registered. The minutes of the previous meeting were read and approved. The Treasurer reported the finances of the Institute in excellent shape. The President appointed J. B. Marks, J. S. Veach and W. A. Ream as a Resolution Committee, and Frank A. Young, M. B. Urquhart and G. A. Murphy a Nominating Committee. There being no further business the meeting adjourned. AFTERNOON SESSION: The afternoon session was called to order in the Ball Room of the Albany Hotel, with approximately one hundred members present, President Whiteside presiding. A. L. Jones read his paper entitled, "The Power Problem of the Coal Mine," and C. E. Drennan, his paper, "Why Alternating Current." These papers were thoroughly discussed, after which the meeting adjourned. EVENING SESSION: At 6:45 p. m. two hundred and fifty-three members and invited guests met in the Ball Room of the Albany Hotel for the banquet. Harry F. Nash was toastmaster, and George Sanford Holmes the principal speaker. Following Mr. Holmes speech, H. N. Wheeler delivered his humorous oration of the "Annexation of Cuba;" following this certain members of the Institute gave an entertainment depicting a fictitious meeting of the United States Coal Commission. Chester Mott, formerly a member of the Institute wrote the words and songs of the entertainment, and directed it. After the show the assembly enjoyed a dance.

Jan 1, 1923

PRESIDENT LITTLEJOHN: The paper of Mr. Emrick will now be open for discussion for about twenty minutes. The meeting is now open for discussion. MR. EMRICK: There is some question that may have occurred to you at different times, that is how are you going to tell when the bits are properly made? A fairly good rule to go by is when the used bits come out of the mine, if half of them are bent and half of them are broken, the average is pretty good MR. GEO. B. PRYDE (Union Pacific Coal Company): I would like to ask Mr. Emrick if he has any figures as to the saving of Dower with the different styles of its. MR. EMRICK: I suppose you mean chisel point bits and pick point bits? MR. PRYDE: Yes. MR. EMRICK: So far as I have been able to learn, the only reason why chisel point bits are used is to prevent coring that might be done by the cutter chain. The pick point bit, of course, is the proper thing to use. It can be used when the position of the cutter links in the cutter chain is right. I do not know of any figures which give power consumption ratings on the use of pick point and chisel point bits, but there are tests and ratings, etc., which have been taken- which have been tested as against different bits, which have been given proper clearances against bits not having been given proper clearances, and they will run,-in their saving in power, they will run 20 to 25 per cent. MR. A. C. WATTS (Chief Engineer, Utah Fuel Company) : I would like to ask Mr. Emrick if he has any record showing the saving in power on using the alloy steel chisel bits. I know that several experiments have been made; I do not recall the figures now, but we had a very decided saving in power. MR. EMRICK: I haven't any of the records. Do you think that is because of the steel that has been used? MR. WATTS: Well, they were all sharpened by the same man and used in the same machine, and at the same shop. I do not know the composition. It is "Red Star" Vanadium that I had in mind. MR. EMRICK: I have not seen any records. Some companies are using the tool steel bits because they stand up a little bit better. MR. BENEDICT SHUBART (Secretary) : I was going to ask Mr. Emrick about that question. There is one company that does not recommend tempering the bits. They recommend using not exactly self-hardening steel, but one that is bard enough without quenching-they use 80-90-point car- bon but about a 70-point manganese, not exactly self-hardening steel, but they do not temper this at all. Will Mr. Emrick state if a steel of that kind could be worked in the bit sharpening machine that his company makes, as it

Jan 1, 1925

The Fifty-ninth Regular Meeting of the Rocky Mountain Coal Mining Institute convening at the Hotel Colorado in Glenwood Springs, Colorado, was declared in session at 10:30 a.m., by Past President Charles M. "Dock" Schloss, Schloss and Shubart, Inc., Denver, Colorado. Dock introduced Mike Zakotnik, Jr., General Superintendent, The Kemmerer Coal Company, Frontier, Wyoming, President of the Institute. His introduction of President Zakotnik follows: Fellow Members, including our charming and beloved secretary, Gussie Whiteside, and our lovely Mrs. Cerise: It is now the appointed time to convene the Fifty-ninth Regular Meeting of the Rocky Mountain Coal Mining Institute which I now declare in session. At our last meeting we elected Mike Zakotnik, Jr., President, and lie has served the Institute intelligently and industriously since his election.

Jan 1, 1963

President Robert Wilson opened the meeting at 9:00 a.m. He introduced William A. Bear, General Manager Bear Coal Company, Inc., Somerset, Colorado, who presided over the session. George Nugent, Peter Kiewit Sons' Company, Sheridan, Wyoming, presented a most interesting film "Montana Mine Reclamation." His biography follows: George Nugent first entered the coal business in 1943 when he developed Peter Kiewit Sons' Co.'s first coal mine-Big Horn Coal Company at Sheridan, Wyoming. Since that time he managed an expansion program for P.K.S. in mining that resulted in the development of two other producing mines - Rosebud Coal Sales Company at Hanna, Wyoming and Decker Coal Company at Decker, Montana, in which Pacific Power and Light is a partner. Applications are now pending for a third mine. Black Butte, a joint venture of P.K.S. and Rocky Mountain Energy Company, near Point of Rocks, Wyoming. Nugent is a Past President of the Wyoming Chapter, Association of General Con- tractors, Wyoming Mining Association and Rocky Mountain Coal Mining Institute. He was President of Big Horn Coal Company and Rosebud Coal Sales Company as well as Manager of the Mining Division of Peter Kiewit Sons' Co. and Decker Coal Company when he retired Jan. 1, 1975.

Jan 1, 1976

By C. A. Herbert

We all deplore the high accident rate of our coal mines, but when brought to task we immediately attempt to appease our conscience by calling attention to the high tonnage rate per fatality in American coal mines as compared to European mines, losing sight of the fact that the accident rate per hours of exposure has shown no improvement during the past twenty years. Measuring our accidents in terms of hours of exposure, not in terms of production, is the only correct method. Certainly it can be of only scant satisfaction to the miner to know that his chances of getting killed this year are as great, or perhaps greater, than last year, but the tonnage rate per fatality will have gone up. We cannot help asking ourselves why it is the other major industries, almost without exception, have made wonderful strides toward reducing accidents, while coal mining stands alone as the one major industry in which no improvement has been made. It certainly cannot be charged entirely to the increased use of machinery and the increased productivity per man employed, as the other industries likewise, or to an even greater extent, have increased the use of machinery and the production per man.

Jan 1, 1931

President Robert E. Murray opened the meeting at 9:30 a.m. He called on the Auditing Committee to give its report. Jack Leech read the report and asked that it be approved. A motion was made, seconded and carried. The Resolutions Committee was asked to present its report. Mr. J. F. Ratchye submitted the following: (1) RESOLVED. Whereas, in the year since the last convention of The Rocky Mountain Coal Mining Institute, the Institute and the Coal Mining industry have suffered the loss through death of the services of: James L. Elder William T. Gibbs Julian E. Tobey John H. Plehn NOW, THEREFORE, BE IT RESOLVED, that there be spread upon the minutes of The Rocky Mountain Coal Mining Institute recognition of the passing of these members, who have so greatly contributed to the advancement of the industry, both nationally and in the Rocky Mountain area, and that a copy of this resolution be sent to the next of kin as evidence of the sincere regard and sympathy of the members of the Institute. (2) RESOLVED: that in recognition of faithful service to the coal industry generally, and to this Institute, Life Membership in The Rocky Mountain Coal Mining Institute be hereby con¬ferred upon the following members:

Jan 1, 1979

The thirtieth regular meeting of the Rocky Mountain Coal Mining Institute was called to order at 11: 20 o'clock A. M., Wednesday, June 3, 1931, President G. A. Kaseman presiding: PRESIDENT KASEMAN spoke in part as follows: I have in mind to say a few words of welcome to the coal operators, but I am afraid that the words I might have said would be hardly appropriate, because I believe the coal operators are in the minority today. It demonstrates to my mind something that has been running through it for some little time. When the hard times came on a year ago, we thought we were going to get over it rather lightly. I recall at this time a year ago we thought that the depression was about at an end. The National Administration from Washington told us we had reached bottom and things were going to perk up, and for a few weeks or maybe a month or more there was a sort of optimism throughout the country. I had been East, and when I re- turned to Albuquerque I said to my friends and associates that things were getting better in the East and that they would soon be better out here and we will not have felt the hard times very much. But I have learned differently since. I have learned that hard times are no respecter of communities or corporations, or persons, or activities, and that we all suffer alike. On that account we find that our Institute is suffering just the same as other activities, whether national, state, local, social, or what- ever it may be. Our attendance is light or, that account. We all know when times are hard we have to stay at home and watch things closer than when they are good. And when they are good we feel that the machine will run of its own momentum and in this way we can get away to see what is going on in the world. When times are hard we have to stay at home and look after everything from day to day and hour to hour.

Jan 1, 1931