Search Documents

The morning session opened at 9:00 a.m. and was presided over by Harold Levent., Manager Coal Activities, Cameron Engineers, Denver, Colorado. The first speaker was Dr. Joseph J. Yancik, Assistant Director-Mining, Bureau of Mines, U.S. Department of the Interior, Washington. D.C. Subject-"Coal Mining R&D Programs of the Bureau of Mines." (See index for printed text of Dr. Yancik's paper.) Joseph J. Yancik is Assistant Director - Mining for the Bureau of Mines, U.S. Department of the Interior, Washington, D.C. He is responsible for the Bureau's research programs in mining. Principal programs are the coal and metal mining health and safety research, mining extraction and excavation, tunnelling, explosives, mined land reclamation, mine fires and mine waste disposal. He administers these programs through four research centers and through outside contracts and grants.

Jan 1, 1974

The 63rd Regular Meeting of the Rocky Mountain Coal Mining Institute convened at the Stanley Hotel, Estes Park, Colorado, and was in session at 10:00 a.m. The first session was called to order by Past President George A. Nugent, Vice President and General Manager, Big Horn Coal Company, Sheridan, Wyoming. He thanked and offered his congratulations to the Program Committee for a very wonderful job, namely, John Reeves, Chairman, E. G. Fox, Lee Jensen, O. F. Lewis, J. Peperakis, R. M. von Storch, J. E. Ward and R. R. Williams, Jr. He thanked the suppliers for a fine cocktail party the evening before. Mr. Nugent's Opening Address and introduction of President James Westfield, Assistant Director, U.S. Bureau of Mines, Washington, D.C., follows: It is a real privilege to call this 63rd Regular Meeting of The Rocky Mountain Coal Mining Institute to order and to say welcome.

Jan 1, 1967

By Bob Burnham

Agenda 1 Overview of forecasting process 2 Review of Pre and Post Recession Forecasts 3 US Demand/Supply Summary 4 Coal Demand by Region 5 Coal Distribution by Census Region 6 Coal Price Outlook 7 Carbon Cases 8 Takeaways

Jan 1, 2009

The Fourth Session of the Forty-Sixth Meeting of the Rocky Mountain Coal Mining Institute convened at the Hotel Colorado, Glenwood Springs, Colorado, June 21, 1950, at 9:30 a. m., G., E. Sorenson, President, presiding. PRESIDENT SORENSON: The meeting will conic to order, please. Gentlemen, we have quite a program this morning, so we had better push this thing along. Be fore we start this morning, I would like to ask Mr. Davis if he wouldn't come up and say a word or two for us. He is the editor of Coal Age. Mr. Davis. MR. DAVIS: This is quite an unexpected honor. I didn't know that I would be called on to speak to you. It will be brief, but very sincere. I have enjoyed every minute of my stay here with you people in the west. It is my first visit out this way, and I have enjoyed every minute of it. I have two more weeks to go out here, and I will probably see a lot of you in your own back yards.

Jan 1, 1950

By J. L. Floyd

The Trapper Mine is a large surface coal operation located in northwestern Colorado US. The coal seams at the mine dip an average of 8 degrees so, historically, their dragline pits have been orien-tated parallel to the dip of the coal seam to balance stripping ratios. However, the mine plan in the future G and Z pits is designed to take advantage of pit orientations that are parallel to the strike of the coal. During the initial presplit and cast blasts in G pit, significant slope damage occurred. This damage included the opening of joints and tension cracking. There was also block movement directly above the L coal seam, which is the main plane of weakness in the slope. A detailed site evaluation was conducted to develop specific blast design modifications to protect the slopes during future blasting. The modified de-signs successfully controlled vibration levels during the blasting of the Z pit box cut. This paper includes a review of the blast vibration related factors that influence slope stability along with a detailed discussion of the field tests and design modifications developed.

Jan 1, 2004

The meeting was called to order by the President, Mr. B. J. Matteson, in Dining Room No. I of the Albany Hotel, at 10 a. in., with thirty members present. After an address of welcome by the President, the Convention proceeded to business. First on the program was the reading of the minutes of the' previous meeting, by" the Secretary.' There being no alterations or amendments they were approved as read. A motion was regularly moved and carried that the Secretary provide membership cards to be mailed, or presented, to the members upon payment of dues in lieu of the receipt which has heretofore been used since the organization of the Institute. Mr. R. A. McAllister then presented his paper, the subject, being: "Mine Haulage." Mr. Robert A. Marshall had prepared a paper upon the subject of "Efficiency in Shot Firing," but as he was unavoidably absent, it was read by Mr. Sam Andrews. At the conclusion of the reading of Mr. Marshall's paper, Mr. Andrews presented his own *paper: "Some Facts About Coal Mining." As Mr. George A. Brown was unable to be present, the President requested Mr. R. S. Morton to read his paper, subject: "Flexoid Tubing and Its Application to Coal Mines as a Means of Temporary Ventilation." There being no further business 'the meeting adjourned.

Jan 1, 1921

MINUTES OF MEETING, AUGUST 27, 1923. Meeting called to order at 10:00 a. m, by the President, George B. Pryde. In the opening remarks Mr. Pryde commented on the Kemmerer disaster, making the work of the Institute particularly important, the desirability of using a more up-to-date emblem for the Institute, the formation of local chapters. The minutes of previous meeting were presented by the Secretary in connection with our publication. Announcements were made regarding the program. Under reports of officers, no reports were made. No reports of standing committees. Report of Special Safety Committee was postponed for a full session, August 28th. There was no further business. Under the head of new business, the following names were proposed and accepted for membership: J. P. Russell, Salt Lake City, Utah, W. A. LaPierre, Salt Lake City, Utah, G. A. Schultz, Latuda, Utah, W. A. Seyffert, Salt Lake City, Utah, P. C. Bunning, Rock Springs, Wyoming, F. L. Gates, Superior, Wyoming, F. C. Miller, Trinidad, Colorado, G. B. Parker, Trinidad, Colorado, Robert Williams, Jr., Somerset, Colorado, F. L. McCarty, Rock Springs, Wyoming,

Jan 1, 1923

By Thos. A. Stroup

From time to time the question of shearing or vertical cutting of rooms and entries especially as an adjunct to the usual horizontal cuts, has cropped up in the literature of coal mining and in the discussions of mining men. Exact and definite data based an thorough tests have usually been lacking however and the present article is written to supply as far as possible this deficiency. The tests given below were made over a period of 90 days in the summer of 1921 and the object was to investigate the general .economics, if any, that might result from the introduction of vertical cutting as a standard practice into the Clear Creek mines. The machine used was the Oldroyd Universal coal cutter and comparative tests were made against the Goodman Straight- face machine and the 35 B Jeffrey Shortwall. The tests however should be held to apply only to the various methods of cutting and not as a study in the relative merits of the various machines. The first series of tests were made in the 2nd East district of No. 3 mine, where only entries were being driven at the time, the tests therefore cover only entry work. The presumption was that the entry width would be 12 feet but the oxerrun in some cases was marked enough to make the work comparable to rooms. The first test made was to determine the time necessary to shear as well as cut the places, and the results were reduced to the time necessary to cut a ton of coal. The time for shearing in the table includes the time necessary to revolve the cutter bar to the vertical position.

Jan 1, 1924

The morning session opened at 9:00 a.m. and was presided over by Mr. Don Ross, Manager of Mines, Kaiser Steel Corporation,- Sunnyside, Utah. The first speaker was Mr. S. W. Zanolli, Partner in Law Firm of Webster and Kilcullen, Washington, D.C. Mr. Zanolli was born and raised in a coal mining community of Fredericktown, Washington County, Pennsylvania. He was educated at Washington and Jefferson College and graduate schools of the University of Pittsburgh. He served as an infantry officer in the European Theatre of operations during World War 11. He worked as' a handloader at Vesta No. 5 Mine of Jones & Laughlin during summers while attending Washington and Jefferson College. He worked at a variety of production jobs at No. 7 Mine. of Island Creek Coal Co. of Holden, West Virginia. Assigned to a variety of industrial relations assignments at Island Creek Coal' Company during 1949-51, attaining position of Supervisor of Personnel and Labor Relations. Served in many industrial relations assignments at U.S. Steel Corp. headquarters during 1953.-1967, attaining a position of Personnel Director-Heavy Products Operations. In January, 1968" he became a member of the Bituminous Coal Operators Association-as Executive Vice President. This past year he went back to practicing law and is a member of the Law Firm of Webster and Kilcullen, Washington, D.C. He is married and has five children.

Jan 1, 1973

(Referring to map) If there are any methods to improve on this I would like to have some suggestions on it. The maps there are on a scale of one inch to two hundred feet. At the time of each extension a letter is used and a line drawn across the entry and the room. The date of the extension is given up in the margin of the map. Here is an extension made April 6th. Extension L is shown in each one of the rooms, November 29th. N-you see the two rooms have been finished down into here. 0-the last extension, has just been stopped, and the three working rooms. Now, one of the features of this plan, when the rooms have been stopped, the line is drawn straight across. When the room or entry is still going, there is a small projection beyond the line, indicating that the next cut is changed. When the distance cannot be ascertained by the engineer, he gets the distance from the mine boss or some other source which is reliable, and that is put on in a dotted line. That gives you a complete story. Anyone looking over the map can see immediately every place that was working at the time of this extension, every place that is inaccessible, and get a complete picture. The extension of the coal is put on the extension at each extension. The survey stations are put in, showing each survey point. The pillars when they are pulled-only the pillars that are pulled are cross-hatched. The whole map is in cross-hatch without any regard as to what pillars are pulled. If a little stump is left in, that is shown on the map. The engineer only shows what pillars are pulled that he has actual knowledge of, or has been given to him in detail by the mine foreman. I believe that concludes the work on the mine map, and there is certainly room for a lot of improvement on most of the mine maps which we have been getting into the office. PRESIDENT PRYDE: Does anyone want to ask any questions? Any questions about the leasing regulations? I want to say there are several leases in the Rock Springs field, and when Mr. Smith comes on one of his visits the Rock Springs Institute have asked him to address them on the leasing proposition.

Jan 1, 1924

At 10 a. m. registration was commenced and completed. At 11:30 a. m. the meeting was called to order by the President, William Littlejohn. There was no unfinished business, new business nor reports of committees. The minutes of the previous meeting, as published in the proceedings, were approved. The report of the Treasurer was referred to the Auditing Committee who were auditing the report of the previous year. At 2 p. m., President William Little- john called the meeting to order for study session. Mr. J. Samuel Pyeatt, the new president of The Denver & Rio Grande Western Railroad, ad- dressed the Institute at length, expressing his pleasure at the opportunity of meeting the coal operators, pledging his cooperation toward the solution of the mutual problems that are arising. He reviewed the change in the Western Industrial situation; explained how the revenue of The Denver & Rio Grande Western Rail- road was being received from freight rates, only twenty-four per cent above the rates of 1914, yet laborers receive 97 per cent more, supplies cost 58 per cent more, showing that no reduction in rates can be expected unless other conditions are adjusted. He gave figures to show the immense sums, aggregating ten million dollars, that have been spent on improvements in the last ten years. The railroad is improving and will continue to improve. Mr. Pyeatt feels that the serious troubles of the railroad are over and that with the cooperation of the shippers, better service and more profits are ahead. He showed the increase in rates on farm products to be only 48 per cent, as against an average in- crease in price of farm products, them- selves, of DG per cent. The position of the farmer is not as serious, nor un- fair, as has been claimed. More equitable legislation is promised, and this is needed to offset the efforts of demagogues to deceive the people as to the actual facts. Much equipment has been put into the railroad, much new and powerful equipment, and ten of the largest narrow gauge locomotives ever built have just been ordered, engines that will do the work of three of the present locomotives. This ratio of improvement will be maintained throughout the narrow guage system, and the Rio Grande will not lag behind the shippers and the operators in co- operation. The President answered Mr. Pyeatt's remarks, and then called the meeting to order for discussion. The study sessions were held; papers were read by .J. H. Emrick, "Cutter Bits"; D. A. Stout, "Experiments in Mining Methods," and Harry Petersen, "Permissible Powder and Cushion Shooting." Tuesday, February 17, 1925 The meeting was called to order Tuesday morning at 10 a.m., and papers read by: F. C. Miller, "Safety Methods With The Colorado Fuel & Iron Company"; this was supplemented by a talk by 0. C. Irwin on "Automatic Mine Fan Control," illustrated by models of the apparatus used; Samuel Tescher, "The Operation of a Gaseous Mine."

Jan 1, 1925

By D. A. Stout

The Rouse Mine, belonging to the Colorado Fuel & Iron Company, earlier known as the Santa Clara Mine, is located at Rouse, Huerfano County, Colorado. Operations at this property started about the year 1899, after the old Rouse mine had been drowned out by a large flow of water coming from the strata underlying the Cameron seam. The present new Rouse mine was opened by a slope on what is familiarly known as the Walsen seam in the Walsenburg district. This slope has an average grade of 12 per cent bearing approximately, south 45 degrees west, and having at the present time a total length of 6300 feet. This seam has an average thickness at that property of five and one-half feet; however, there are sections of the mine where the thickness is from seven to eight feet. The mine has been developed. since the time it was opened on what is known as the Room and Pillar system ; water level entries have been driven right and left off the slope, and in some cases the rooms are driven directly up the pitch; and in other cases entries have been driven with rooms turned on water level courses. The first flow of water of which we have ally record was encountered in 1901 in what was called the "Second West Entry." This flow, however, was small, and did not require the installation of any large pump unit. From 1901 up until 1909 the flow increased normally as the field was developed. In January, 1909, the first large inflow occurred, coming from a break in the seventh west entry, making a total flow at that time of about 500 gallons per minute. This necessitated putting in larger pumps, and the first pump to be installed of the centrifugal type was a 600 gallon Worthington. By the year 1911 the water had increased, due to additional development, until it was found necessary to install an additional 600 gallon Worthington centrifugal type pump. In December, 1912, a break occurred in the eighth west entry, between the fourth and sixth cross entries, making 2000 gallons per minute. This flow decreased after a period of three weeks some 500 gallons, but on account of the quantity of water then being handled at the mine, and in view of the fact that we needed some reserve pumping equipment to take care of these flows, and additional 600-gallon Worthington centrifugal type pump was installed in June, 1913. An the latter part of 1914 a 250 gallon Reese roturbo was installed to take care of the water, which was being made in the lower workings of the slope. We found after the installation of the centrifugal pumps that the water decreased to a certain degree in the uppermost workings. This led us to believe that the field was being drained, more or less, and the head reduced ; however, our ideas in regard to this were again upset in December, 1915, when we encountered a flow in room 6 off the first cross entry on the ninth east entry. This flow was not as large as previous flows had been, but made 200 gallons per minute.

Jan 1, 1921

WILLIAM P BALAZ RMCMI PRESIDENT 1990-1991 on behalf of the RMCMI Board of Directors and Officers of The Rocky Mountain Coal Mining Institute cordially invites you and your family to attend the 87th Regular Meeting and Convention to be held June 30, July 1 & 2, 1991 Keystone Resort, Colorado

Jan 1, 1990

Mr. Ronald H. Achziger Midwest Rbr & Sply Co 6404 E 39th Ave Denver, CO 80207 Mr. Randy Acre Acre Management POB 130 Florence, CO 81226 Mr. Brian L. Acton Pacific Basin Resources 7901 SouthPark Plaza #205 Littleton, CO 80120 Mr. Laine W. Adair Andalex Resources Inc POB 902 Price, UT 84501 Mr. Joel Allen Knife River Coal Box 39 Beulah, ND 58523

Jan 1, 1996

The meeting was called to order with President George B. Pryde in the chair, and C. M. Schloss, acting Secrcetary. The meeting immediately pro¬ceeded to the reading of the papers. Mr. L. S. Ickis read a paper by A. L. Jones, entitled, "Underground Sub-Station Control," and elaborating on the general topic of automatic sub-stations. The discussion was led in part by Mr. E. H. Weitzel, acting as Chairman, in Mr. Pryde's temporary absence. Mr. S. R. DeBoer, who specializes on landscape architecture, gave an interesting talk on the subject of "City Planning and Landscape Architecture for Western Coal Camps." Notes were taken of this talk, which will be found in the proceedings. Mr. Pryde then resumed the Chair; There was no discussion of this paper. Mr. Thomas Foster, of Reliance, Wyoming, then read his paper on "Coal Dust in Mines." After the discussion of Mr. Foster's paper, the discussion of Mr. McKeehan's paper on track bonding, read at the Salt Lake meeting, was resumed, and this discussion will be found printed separately in the proceedings. Mr. Schloss then read an amusing and friendly telegram from C. H. Stevenson, of Price, Utah, which caused considerable merriment, and the Chairman asked Messrs. Weitzel, Littlejohn and Schloss to form an appro¬priate answer, and they answered it in the same spirit. The Chairman then announced the banquet for Wednesday evening and the Theatre Party for Thursday evening. The meeting then adjourned. The meeting resumed at 10:15 A. M., Thursday, February 14, 1924. The Chairman announced a photograph of the meeting to be taken at noon, on the Post Office steps, after which the Chairman appointed a nom¬inating committee, consisting of George A. Murphy, F. W. Whiteside and

Jan 1, 1924

Jan 1, 1927

Jan 1, 1967

John Chrystal Richard R. Fenner G. D. Grayer Albert M. Keenan C. E. Osborn Stanley C. Shubart George Sumers Cal Witmer Death is not the end, but the beginning, Not the surrender of life, but of earth Not a time for tears ... but faith.

Jan 1, 1982

of our good friends and fellow members: Patrick J. Quealy J. C. Roberts Gilbert Morton Sidney W. Farnham who left the world better for their having lived in it

Jan 1, 1930

Jan 1, 1977