Search Documents

By Eugene McAuliffe

The subject of my few remarks addressed to the Rocky Mountain Coal Mining Institute, "Guessing or Knowing! Which," may perhaps suggest but little to you here today. However, I am sure you will all agree with me when I say that in the conduct of a coal mining operation there should be no choice between guessing and knowing. The value of, and the results to be obtained from this Institute, its meetings and printed transactions, as well as those of other similar educational organizations, depend very largely on the mental attitude of those who constitute, through their pronouncements, the more active portion of the membership. Perhaps the most apt criticism that is now being made of the coal industry is that, to an extent possibly exceeding any other industry of similar magnitude and importance, it depends for its conduct altogether too much on "rule of thumb" and "tradition," rather than on proven practice and actual fact. The records of our coal mining association meetings bear expression of many conflicting opinions, the majority of which are sincerely put forth by those expressing same as representing the facts; the extremes expressed, however, frequently fix the question raised as one yet located in "no man's land." There are yet too many chances taken we are still "weighing pounds on railroad track scales" and measuring yards with the proverbial "bit of string." The actual expense of conducting any one of the several operations incident to the production of coal is rarely determined, and in many instances the general cost figures, prepared some weeks after the work is complete, are of that sweeping character that very little can be abstracted therefrom. Many coal companies are now making a daily cost sheet, showing the cost of labor and material in detail, as used in the several related operations,, and such is decidedly helpful, particularly to the mine superintendent and his foreman, who, without such, sail an uncharted sea; the auditor's belated monthly summary rarely ever seen by these men who are held responsible for the labor and material used. I have made reference to this situation as an accentuation of the fact that the coal industry contains more "serious minded, conscientious guessers" than does any other similar industry, although the annual cost of our product runs up well beyond the billion dollar mark, and what is more important, our industry is one that still continues to exact a heavy toll of human life. Now this brings me to the question of safety, the one question that should be, and which is, I know, uppermost in your minds. The coal mining world, engineering and operating, is now well sold on at least two things the theory of using permissible explosives and the elimination of the open light. Furthermore, the industry, particularly that portion which is located in Great Britain and the United States and Canada, are now planning vast extensions of the use of "rock" or "shale dust," both in the form of "dust barriers" and in "direct application" to entries and cross-cuts. This is well; however,, my study of past mine explosions has convinced me that the great majority of such had their very beginning in gas accumulations; frequently originating in restricted areas at the working face, in abandoned worked-out areas, or in some other certain place where ventilation is not, maintained as it should be; and that again leads me to the point where it can again be well said, that there is too much "rule of thumb," too much guessing now being done in regard to the volume of air required, and continuously furnished, in a given entry,, panel, room or area. Just to emphasize this situation, is it not a fact that the majority of mine inspectors express the ventilation conditions as measured by them, in terms of cubic feet per man employed, in each certain split, and does not the mining laws of many states yet demand a minimum of "100 or 150 cubic feet

Jan 1, 1924

By Joseph Harrington

It is sufficiently correct to say that domestic solid fuel is universally hand fired and it is almost as correct to state that a very large proportion of hand-fired domestic fires are extremely inefficient and smoky. This is particularly true with raw bituminous coal for the fuel. The smokeless and efficient firing of domestic coal affords one of the most difficult problems confronting the combustion engineer. This is due to the universally constricted combustion space in the domestic furnace, the complete ignorance regarding the laws of combustion on the part of the average person, and the fact that the laws of efficient combustion are almost completely nullified under these conditions. It is well to familiarize ones self with these laws. These are: 1. The gradual introduction of the fuel to the furnace. 2. The admission and mixing of the right quantity of air with the coal gases. 3. A temperature high enough to permit complete combustion, and 4. A furnace space of volume sufficient to permit of the combustion gases and the oxygen getting together within the confines of the furnace. Even a casual inspection of the domestic heater will show that none of these essential things are present in proper degree, and this is the reason why the problem of domestic firing presents such difficulties. I have analyzed these conditions in a paper published by the Black Diamond, and which has already had wide distribution, so that I will not repeat the rather lengthy discussion in this paper. A survey of the entire field indicates very clearly that a reversal of existing methods and equipment must be had before any real improvement can be expected. It is my firm belief that in this instance above all others it is necessary to build the efficiency and smokelessness into the equipment in such a manner that its performance will be entirely independent of both skill and interest on the part of the operative. To attempt to educate every man, woman and child who periodically throws coal into a domestic furnace would be literally impossible. Much can be done, however, if we could teach the householder the simple essentials of alternate firing, which I have explained at length in the above mentioned paper. This would go a long way toward making the domestic furnace problem more satisfactory, as well as efficient and smokeless. Many will argue, and with good reason, that the domestic fuel should be prepared coke and with this I agree up to the limit imposed by the practical considerations of quantity production, price and the possibility of marketing the by-products. It will be obvious that if enough raw coal should be processed to provide all of the required domestic fuel that the amount of by-products recovered during the coking process would be so great that there would be little or no market at any price which would justify the manufacture of coke. If the by-products were wasted they would not only be a tremendous economic loss, but the price charged for the coke would probably be so high that the market would be limited, and this would defeat the very idea of the whole thing. Much can be done, however, in advancing the use of coke, but I believe that much more extensive and careful experimentization should be had in order to determine the right size and quality of coke for the various domestic furnaces. If coke were to be developed for extensive domestic consumption it is more than probable that the coking process should and could be stopped at a point where the volatile content of the coke would be sufficiently high to permit of prompt ignition and combustion in low draft installations. If the volatile content were from five to ten per cent a very different kind of coke would be produced from that which is now produced with perhaps one per cent of volatile. A skillful manipulation of this feature would make coke adaptable and satis-

Jan 1, 1925

By C. A. Allen

In presenting a summary of the uses of fine and pulverized coal the writer has borne in mind that we are not trying to determine what a combustion engineer should know but we are only trying to find out in what ways the consumption of slack can be stimulated. First discussing the use of powdered coal it can be stated that it has passed the first experimental stage but is still capable of much development and improvement. It has already found successful application in stationary and locomotive boilers, cement kilns, calcining furnaces, reverberatory smelting furnaces and many other types of furnaces, such as open hearth furnaces and annealing furnaces. For stationary boilers it seems to have been thoroughly demonstrated that powdered coal is more efficient than stoker installations. Over-all efficiences of boiler and furnace in stoker installations of the best type run from 70 to 76 per cent; whereas the efficiency of powdered coal installations averages slightly over 80 per cent. However, due to the increased cost of pulverized coal, the increased efficiency of these installations over stokers, from a money stand-point, will not be more than 1 or 2 per cent. The fusing of the ash in pulverized coal installations has given some trouble but apparently is easily overcome, on the other hand the fine ash, which is carried along with the draft, causes trouble both in the boiler and by settling on surrounding buildings or ground. Offsetting the disadvantages the great advantages of pulverized coal for stationary boilers seem to be: First-the ease with which a change in the load on the boiler can be taken care of. Second-when a boiler is cut out for a short period the "stand-by" losses are much less and, Third-a much poorer grade of fuel can be used. In many cases where pulverized coal has been used it has replaced slack coal which is of little advantage to the coal operator. However,, in other places it has replaced gas or oil and this is where the coal man is interested. Pulverized coal has the same advantages as the liquid or gas fuel but the question as to which is preferable depends on their relative cost at the point of use. In small stationary boilers where stokers are not used, very frequently the larger sizes of coal are, and it would be an advantage to the coal industry for them to be converted so as to burn pulverized coal, but so far there are only records of a few of such small installations having been a success and there is apparently room for a large amount of experimentation. In furnaces, such as smelting and assaying furnaces, annealing furnaces, etc., slack coal is not used and where pulverized coal has been installed it nearly always replaces fuel oil or gas. Just how much increased consumtion of coal can be made by pulverizing it for use in furnaces of this type can not be determined but it seems worthy of investigation. For locomotive boilers pulverized coal has found some application up to date but where it was being used in the United States it was stopped when we entered the war. In Brazil, however, the Central Railway has been using pulverized coal for locomotives with excellent results. If it could be possible to apply it to locomotive use where fuel oil is now used, or the larger sizes of coal, it would certainly make a big difference in the slack situation. Now as to the uses of slack coal without pulverizing. The writer's investigations lead him to believe that the greatest opportunities in this direction are in the line of increasing its use by apartment houses and small home owners. In fact in looking into the subject I found that a number of men in Salt Lake City are using run of mine coal in the usual type of house furnaces, some of them by separating the fines and wetting them down before feeding to the furnace claim they get no loss whatever through the grate. However, for best results with fine coal different types of furnaces must be installed and for apartment houses it would seem necessary to have either a small automatic stoker or else spray the fine coal in with an air blast from

Jan 1, 1922

PRESIDENT LITTLEJOHN: Gentlemen, you have heard Mr. Dyer's paper. The meeting is now open for discussion. MR. NORMAN: I would like to ask the gentleman what is the distance between your crosscuts for the ventilation of rooms and entries in the state of Utah?

Jan 1, 1925

Jan 1, 1928

Jan 1, 1995

Jan 1, 1987

By Dallas Grubbs

Agenda ?Growth Projections ?Economic Indicators ?Mining Equipment Growth ?Tire Supply ?Michelin Actions to Increase Capacity ?Michelin?s Challenges & Recommendations

Jan 1, 2006

[Page Minutes 7 Discussion of L. S. Ickis' Paper 20 City Planning and Landscape Architecture for Western Coal Camps, by S. R. DeBoer 22 Discussion of Thos. Foster's Paper 26 Discussion of Safety Committee Report 30 Discussion of R. L. Hair's Paper 52 Discussion of H. I. Smith's Paper 61 Miscellaneous Discussion 62 Discussion of Thos. A. Stroup's Paper 70]

Jan 1, 1924

"Let us not think of our departed dead As caught and cumbered in these graves of earth; But think of death as of another birth, As a new Freedom for the wings outspread, A new adventure waiting on ahead, As a new joy of more ethereal mirth, As a new world with friends of nobler worth, Where all may taste a more immortal bread." FLOYD W. PARSONS N. CHRISTENSEN JOSEPH F. PETERS GEORGE B. PARKER ROBERT WILLIAMS B. F. DEVINNY

Jan 1, 1942

[ALLISON, D. S.. ...................... ,1331 Roberta St., Salt-Lake City, Utah AMBLER, J. B.. ........ c-o Ambler & Riter, Kearns Bldg., Salt Lake City, Utah ANDERSON, A. E.. ................ ,403 Midland Savings Bldg., Denver, Colo. ANDERSON, ARTHUR E.. .. .Colorado Utilities Corp., Steamboat Springs, Colo. ANDERSON, FRANK ........................................... Crosby, Wyo. ANGUS, WILLIAM.. ........... .99 South Downing St., Apt. 204, Denver, Colo. APPERSON, A. B.. ............................ .Tramway Bldg., Denver, Colo. ]

Jan 1, 1928

Jan 1, 1988

[ADAMS, JOHN P. 0. Box 560-No. 6, Rock Springs, Wyo. ADDISON, HERBERT Big Horn Collieries Co., Colo. Bldg., Denver, Colo. ALEXANDER, JOHN 825 South Gaylord St., Denver, Colo. ALLAN, DAVID Gorham, Colo. ALLEY, GERALD 1340 Steele St., Denver, Colo. AMBLER. J. B c-o Ambler & Riter. Kearns Blde.. Salt Lake Citv. Utah ANDERSON, A. E. Midland Savings Bldg., Denver, Colo. ANDERSON, ARTHUR E...Colo. Utilities Corp., 730 Equitable Bldg., Denver, Colo. ANDERSON. FRANK Crosb Wyo. APPERSON, A. B Tramway Bldg., Denver, Colo. ARNOLD, G. O .Oak Creek, Colo.]

Jan 1, 1930

Jan 1, 1935

Jan 1, 1989

Jan 1, 1991

Outline ? Overview ? Existing Operations ? Mine Planning ? Future Trends ? Market Impacts ? Conclusions

Jan 1, 2006

Jan 1, 1987

Article I1 of the RMCMI Bylaws reads: Section 1. Classes. The membership of the corporation shall be divided into three classs, consisting of active members, life members and senior members, who shall have such rights, privileges and qualifications as these bylaws may provide. The names of all active, life and senior members, together with current mailing addresses, follow. [Lt. Jay Abbott M. L. FOSS Co. 7458 S Jackson St Littleton. CO 80122 Lt. Ronald H. Achziger Midwest Rbr & Sply Co 6404 E 39th Are Denver, CO 80207 ]

Jan 1, 1986

By Grainne A. Matthews

Jan 1, 2008