Search Documents

By Thomas Collier

MR. PRESIDENT AND CO-WORKERS IN THE COAL INDUSTRY: I was requested by our president to prepare a paper on Longwall Coal Mining, to be read before this honorable organization. There are three general systems of Longwall, Longwall advancing and Longwall retreating, and the Nottingham system which is worked in England and South Wales. In Fremont county, where I am employed, the Colorado Fuel and Iron Company are working their mines on the advancing system. The face is started generally from the bottom of the shaft or other mine opening, or, at the outside of the pillar left to support the shaft or slope-bottom and advances toward the boundary of coal area. As the roads in this system are maintained by pack walls, it is sometimes called gob-roads system, and by these means the mine is opened up rapidly and consequently early returns are secured from the capital invested. By this method, there is no expense for narrow work, and a minimum amount of timbering of the roads is required. Now what I call ideal Longwall work is where there is about eight inches of dirt mining-and four and one-half feet of coal, .and when the entries and rooms will gob themselves, so that there will be no rock or dirt to haul out to the surface. But this is not the case in the mine I am in charge of. The entries and rooms will not gob themselves, therefor we have to haul the rock and dirt to the surface, which runs up the cost of production. Now the ideal roof in Longwall is composed of tough elastic and pliable strata that yield gradually by bending when the coal is removed, and throwing a sufficient weight or roof pressure on the coal face to break the coal when the same has been mined or undercut. Timbering should be done systematically, the coal well spragged before the miner starts to undermine the coal. Cogs or cribs are alright in their place, but I am not a believer in crib in Longwall working because they are too strong for the roof and do not leave the roof to squeeze .down gradually and break the roof around the crib. Longwall work requires particular skill on the part of the miner, and a familiarity with the conditions affecting room and pillar work, and a good room and pillar mail may not be successful in. Longwall work. A good Longwall miner realizes more than any one else the importance of being regularly at his place every working day. A day lost causes his place to fall behind the others which makes his work harder, and his daily output is further reduced by the amount of small coal that is liable to result from the excessive pressure where the face falls behind. The bad results are also felt by the miner working on each side of such place, as the roof pressure is often insufficient and the coal does not break as well as when the face is kept in a uniform line.

Jan 1, 1921

By O .. G. Sharrer

Loading mechanically has of late become the most widely discussed subject in connection with coal mining and has even equalled. the discussion of safety measures as a topic of interest. The subject has been discussed in the various mining journals and by well. informed persons at the Mining Institutes, so it would appear; that all has been said that can be said until further experiments bring out new lines of discussion. It is, therefore, not the intention to present this article as a technical discussion of the subject of mechanical loading as a whole, but rather as a plain talk on machines with which the writer has had personal contact. In 1919, during the first period of post-war depression, a Pennsylvania coal company employing union labor became interested in the possibilities of mechanical loading with the hope of reducing their mining costs, which were and are yet too high to meet competition from the non-union fields of Somerset and Westmoreland counties. Of several loaders presented for their consideration the model of the Joy loader shown by Mr. Joseph F. Joy, seemed to hold the greatest possibilities, and after extended study, the management decided to invest in a machine of this type. A machine was built, which as far as the writer knows was the only one of its type ever put on the market. This machine arrived at one of the mines early in 1920 and was put to work immediately. It was a forerunner of the present 4-BU and 5-BU types, but differed from them very radically as to design. In general the machine consisted of the familiar Joy gathering arms and a short conveyor which discharged into a steel tank which held about four and one-half tons of coal. This tank was emptied by a second conveyor which placed the coal in the mine car. The object of this conveyor tank was to provide storage room while changing cars and to allow the machine to load on the entry while the room was short. This plan was very efficient and from our experience was worth retaining, but has been abandoned by the Joy Company on account of its making the machine unwieldy. The whole machine was mounted on caterpillar tractors which were driven by two 10-H.P. Westinghouse series wound motors, each having its own controller, the controllers being arranged in tandem so as to be operated by the same handle. This very ingenious scheme which is shown in Figure 4, was supposed to make it possible to steer the loader by the controllers. By swinging the handle one way both motors moved forward, by swinging the handle the other way both motors moved backwards and by twisting the handle as shown by arrows, one motor moved ahead and the other back, thus causing the machine to turn. This scheme proved a failure as the loader was too temperamental and erratic in its operation. After Mr. Joy, himself, narrowly escaped serious injury, this device was taken off and the controllers manipulated separately. This system never proved satisfactory and was abandoned' for

Jan 1, 1925

Winter Meeting Cosmopolitan Hotel DENVER, COLORADO February 27,28 and 29,1928 Business Meeting 10:OO a. m., February 27th Banquet 6:30 p. m., February 27th Dancing 9 :30 to 1 :00 a. m., February 27th Theatre Party, February 28th Special efforts will be made to care for lady guests

Jan 1, 1927

By Charles Gottschalk

Some time after my arrival in Rock Springs to fill a short engagement with The Union Pacific Coal Company, Mr. Dickinson informed me that he had placed me on the program for a paper entitled "Mechanical Loading in Indiana." Since development of mechanical loading operations on a genuine coal producing basis for that section began near Oakland City, Indiana, and rapidly spread over Southern Indiana, Western Kentucky and Southern Illinois simultaneously, the results referred to are in many ways common to all three states. Prior to December, 1922, several attempts at mechanical loading had been registered, notably among which were installations of the Jeffry Entry Driver, and the Meyers-Whaley loader. The object of most of these earlier installations was quick development rather than lower production costs in face loading. In this measure it is claimed the machines were at least partially satisfactory. Three items which seemed to delay rapid progress in the adoption of either machine were, excessive first cost, height of coal seam necessary, and timidity of the operator relative to the labor situation which might develop. When the Joy machine was put on the market in the form of the 4-B.U., with a clearance overall which would perform in coal slightly under five feet in height, and at a cost price of less than one-half that of other machines being sold, many operators were at once ready to take a chance along with the manufacturer. This desire was accentuated by the difficulty to operate coal mines at all at prevailing production costs. This condition also made the coal miner more receptive to machinery which would give added employment to the field. At the convention held in Cincinnati during May, Mr. .Joy stated that about 200 of his machines were in operation at that time. Mr. Whaley said that about 40 of his were in use in coal mines. It is probable that of the above sum 75 machines were installed in Indiana, Illinois and Kentucky. Since that time, possibly 50 more machines of later design have been added. Like many of our troubles, those which seemed most difficult to overcome, proved in the end to have been least of all, and in this case the sup¬posed resistance which labor would advance has been more or less imaginary. In Illinois and Indiana a scale of wages is being accepted which is consistent with average earnings of machine men. The fact that a large number of coal operators want and are buying more loading machines has encouraged mining machinery manufcturers on every hand to devote renewed vigor to the cause and it is generally understood that new types and models are being developed both in factories and mines with the coal industry eager always to see the latest development. I understand that at present the Goodman, the Jeffry, and the Sullivan machinery companies are each offering new designs to meet Indiana and Illinois requirements. It is not strange that with so many installations many were made as a result of an impulse to ride the band wagon without any serious attempt to study the results or draw any conclusions from the experiences of others with loading machinery.

Jan 1, 1924

[Page Minutes 7 Discussion of L. S. Ickis' Paper 20 City Planning and Landscape Architecture for Western Coal Camps, by S. R. DeBoer 22 Discussion of Thos. Foster's Paper 26 Discussion of Safety Committee Report 30 Discussion of R. L. Hair's Paper 52 Discussion of H. I. Smith's Paper 61 Miscellaneous Discussion 62 Discussion of Thos. A. Stroup's Paper 70]

Jan 1, 1924

By S. W. Farnham

We have listened to many papers describing mechanical loaders, and systems of mining planned to increase their efficiency. We have become familiar with the various types and in a general way, their capacities and limitations. Messrs. F. E. Cash and E. H. Johnson in Bulletin 17 of the Carnegie Institute of Technology, subject Coal Mining Investigations, have a very complete review of the loading situation then. Mr. A. W. Dickinson, in a recent paper before this Institute, gave a later illustrated review of mechanical loaders. On page 28 of Cash & Johnson's paper is a list of loading machines to which might be added to bring the list down to date, the following: Under Digging and Loading Machines The Goodman Power Shovel Under Scraper Loaders The Goodman 436-G-3 125 H. P. three drum Scraper loader The Goodman 35 H. P. Entry loader and the Two Drum 125 H. P. Hoist built by Vulcan of Denver for scrapers Under Shaking Trough Conveyors The Eickhoff Conveyor The Link-Belt Conveyor The McCarty Duck-bill which is really a digging and loading element built to attach to the end of and operated by a reciprocating conveyor. The outstanding feature in this line of work in the past few years is the fact that a few very successful operations have been worked out on a large scale; the officers and staff in charge of this work have gone into details very thoroughly and altered and improved, in many cases, their mine equipment and mining methods, and by the exercise of persistent energy and intelligent effort, in the face of frequent difficulties and discouragements, they have attained results that are far ahead of the average loader operation. The coal mining industry owes much to these men for the pioneering and development of mechanical loading; their investigations in transport, shooting, shearing, snubbing, cleaning, and production costs, the results of which they have given freely and frequently to the public, are of great value. Foremost among the pioneers in this work are the Union Pacific Coal properties, the Quealy properties, the Sheridan Wyoming Coal Company and in the Central West, the Union Colliery Company of Illinois. On the other hand, in the great majority of installations, one loader, or possibly two or three loaders have been started in a given operation and through failure to make the proper effort to improve their transportation and work out the systems to utilize their loading machines, the loaders have not shown appreciable savings and in many cases, the installation has failed. It has been frequently stated in many meetings where loading has been discussed, that the idea of mechanical loading must first be sold not only to the operating staff but to the entire personnel of any company where installations are made. The problems involved in the successful application of this equipment are such that it requires enthusiastic and wholehearted teamwork on the part of everyone connected with the work and when difficulties arise, they must be ready to exercise initiative and try new ways oftentimes of overcoming impediments. The closest attention now is given to the question of economics how much will a loader reduce the cost of coal in any particular situation? Without fear of successful contradiction, I believe that experience up to date has unquestionably shown that where the shovel type of loader can be properly used, it produces in wide work, the cheapest coal of any loading device yet brought onto the market. Naturally there is a considerable difference between the results from different makes of shovels.

Jan 1, 1926

By Todd A. Myers

Forward Looking Statement Disclaimer This presentation may include forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995, including statements about the Company's vision, strategy, operations, growth, development and any other statements containing the words, "believes, " "expects, " "anticipates, " "plans, " "estimates, " and similar expressions. There are a number of factors that could cause Westmoreland Coal Company's actual results to differ materially from those indicated by such forward-looking statements including, but not limited to: general economic and business conditions; healthcare cost trends; the Company's ability to manage growth and significantly expanded operations; the ability of the Company to implement its business strategy; the Company's ability to pay the preferred stock dividends that are accumulated but unpaid; the Company's ability to retain key senior management; the Company's access to financing; the Company's ability to maintain compliance with debt covenant requirements; the Company's ability to successfully identify new business opportunities; the Company's ability to achieve anticipated cost savings and profitability targets; the Company's ability to utilize its tax net operating losses; demand for electricity; the effect of regulatory and legal proceedings; and other factors identified in the Company's most recent Annual Report on Form 10-K and subsequent reports filed with the SEC. The Company disclaims any intention or obligation to update any forward-looking statements as a result of developments occurring after the date such statement was first made.

Jan 1, 2008

By T. H. Butler

The two most talked of questions in the mining industry today are rock dusting and mechanical loading. The one as a matter of safety, and the other as a matter of economy, and both are of vital interest to the mining fraternity. Rock dusting and other safety methods will be dealt with by others at this meeting, so I will confine my few remarks to the matter of mechanical loading. I will not attempt to tell you what mechanical loaders are doing in the different mining fields throughout the country, or what they should do, but will endeavor to give you an outline of the work being done with mechanical loaders in No. 4 Mine of the Union Pacific Coal Company, at Hanna, Wye. In order that you may better understand and be in a position to follow me it will be necessary to cite the conditions under which we are working. and the type of loaders in use. The seam pitches from 14 to 17 degrees, and is normally 32 feet in thickness, and is overlaid with a soft sandstone roof. The panel system of working is used, planes being driven on the pitch, and rooms driven on the strike. Owing to faults being encountered planes are driven between the faults, and the. rooms on either side are in some instances 800 to 1,000 feet in depth. Rooms are advanced eight feet in height, and 32 feet in width, by hand loaders and .Toy mechanical loaders, and when driven to the boundary,, 18 feet of the remaining 24 is loaded out with Thew electric shovels, and six feet left to protect the roof. In January, 1916 the company installed a Type 1 Thew shovel, equipped with a 1 1/4-yard dipper, and in July, 1917, they installed a Type 0 Thew electric shovel, equipped with a 1-yard dipper, and in the year 1918 two additional Type 0 Thew shovels, equipped with a 1-yard dipper, were installed, making a total of four Thew shovels for this mine. The introduction of these shovels caused the employees much concern, and like all departures from the old methods of mining, met with indifference by some and open antagonism by others, so that for some time they results obtained were not satisfactory. However, by constant supervision and changes in the method of haulage the results obtained at present, while not entirely satisfactory, are much better and the production and costs are reasonably good. The Thew shovels in use are mounted on traction wheels with swivel axle and move. in all directions by their own power, and while the weight of each is approxi¬mately 20 tons, they are not as cumbersome as. one would think and are easily operated. The system used in working these shovels is to shoot the coal clown ahead of the shovels and maintain two tracks, two cars being used on each track so that shovel is loading on one track while driver is, changing cars on the other. When place is finished the shovel is run back to the first cross-cut by its own power and lowered to the next room with block and tackle, the roof coal in cross-cut being shot down to a height of 16 feet to allow passage of the boom. With better results from the Thew shovels we soon realized that it was necessary to find some method of developing rooms faster than was being done with hand loaders in order to keep the Thew shovels in working places, and in November, 1923, the company purchased from the Joy Machine Company two Type 4 B U Joy loaders, and the installation of same met with the same indifference and antagonism from the employees as did the Thew

Jan 1, 1924

BENEDICT SHUBART: I am rather surprised at one statement of Mr. McKeehan, that he found it satisfactory to bond only one track. It has always been my idea of good practice to bond both tracks and cross bond frequently, so that in case of any break in the bonding of one track, which frequently occurs, there will be no interruption in the circuit.

Jan 1, 1923

PRESIDENT WHITESIDE: I am sure we are very grateful indeed for this very interesting talk that Mr. McClure has given us. If anyone has any questions to ask Mr. McClure I am sure he will be glad to answer them at this time. MR. WEITZEL: I want to ask Mr. McClure whether in the instance he described by-passing the drier, whether there was any rest period between the crusher and the furnace, whether the powdered coal that was not dry was allowed to rest in the pipe or was blown directly into combustion chambers. MR. McCLURE: Yes, it moved directly; there might have been some difference had we given it an opportunity to rest. We just had to get in and get out so as not to interfere with operations. MR. WEITZEL: Your idea is, even though you did use a high moisture lignite, you could store it under water if you eliminated surface moisture later. That is a new idea to me; I always had thought that you had to reduce the moisture down under 2 per cent, and to try to store it with anything more than that, any higher moisture, you would have to break the stuff loose again, as it gets so hard it won't move. MR. McCLURE: It might develop I am absolutely wrong; I am just saying what I observed, and I may have had some unusual condition, which I did not detect; something may actually develop which will make my statement of drying lignite entirely wrong. It was quite a surprise to me, surprise to every-

Jan 1, 1923

By Douglas Kathol

Coal in the 1990?s Exit of the integrated oil company [Shell Arco Mobil Exxon Mapco Kerr McGee Hansen Nerco Sun] Continued decline in coal prices Significant mergers & acquisitions (M&A) activity ?Most properties traded, some twice ?Significant consolidation ?Massive recapitalization ?New industry leaders ?Frustrated expectations

Jan 1, 2002

MR. GIBSON (continuing): In connection with the coal from this mine, I will say that it is not a very dirty coal. The vein where most of the coal comes from is about eight feet thick, and two feet from the bottom there is a small boney band about two inches thick. The breaking shot has to be placed over the, band, therefore breaking the boney into fine particles which goes off with the slack. This coal is a very good domestic coal and the slack is in great demand for various power, plants, such as sugar plants, smelters and other industries, but where this, boney is broken up and goes into the slack, it is very injurious in effect and retards the sale of the slack. Therefore the Spring Canyon Coal Company went to the expense of' building this plant, costing over $250,000, just in order to get that, two inches of boney coal out of the rest of the vein. The market in, Utah is very critical, and in order to sell coal, the product must be thoroughly clean in every way and, as Mr. Murphy says, I believe they have succeeded in making a very good commercial product. In any event the Spring Canyon Coal Company put out more coal than any other one mine during the last year, 1924, they had the largest production. I thank, you. (Applause). PRESIDENT MARKS: With the assistance of Mr. Robinson and Mr. Miller, I am sorry you could not get the pictures a little better synchronized with the story. MR. F. C. MILLER (Chief Chemist The Colorado Fuel & Iron Company, Pueblo) : We had seven slides to show eighteen different views on the screen and we did remarkably well. (Laughter.) PRESIDENT MARKS: Is there : any further discussion on this paper? MR. G. B. JONES (Mining Inspector, Victor-American Fuel Co.) : I would like to ask a question on the

Jan 1, 1926

MR. LITTLEJOHN: Have you any maximum length that you make your dust barriers? What I mean by that is, your entries are 10 feet wide, and I believe if I remember right, in your single track entries you had only one dust barrier to cover the full width of the. entry in your double track entries, I believe you had two-I would like to know, have you any maximum length you make these barriers? MR. CHAS. LEGER, ROYAL FUEL CO., UTAH: It is stated that they shouldn't be over 8 feet long to obtain sensitiveness. If they make them over 8 feet they are not as sensitive as they should be. They should be made short for two reasons in order to keep the sagging out and to make them as sensitive as possible. MR. DAN HARRINGTON, U. S. BUREAU OF MINES: I didn't come here to enter into any extended discussion on rock dusting or to discuss in particular the situation at Dawson. At the February meeting at Denver, we made a complete study of this matter. Since that time a report was completed and reported to the Phelps-Dodge Corporation and Mr. Moorhead probably has a copy of it, which can give you more complete information as to what we found. We found that with the adobe dusting that they have done, they had six miles of entry pretty thoroughly dusted and of all the samples we took, at least 95 percent of them showed that not only the floor but the ribs and roof were in such a condition that an explosion could not originate in any part of this entry. In other words, this entry as it was dusted was absolutely protected from ignition and propagation. The adobe they used was of material that was non-combustible. In most instances there was not more than 3 per cent of moisture in it.

Jan 1, 1924

Jan 1, 1930

Jan 1, 1929

PRESIDENT MOSES: I think this will conclude our program for this afternoon, unless you have some- thing else. Mr. Holman, will you tell us what you are doing in the way of your local chapter, around Dawson? W. C. HOLMAN: (Chief Engineer, Phelps-Dodge Corporation, Dawson, New Mexico.) We have organized a local chapter of the Rocky Mountain Coal Mining Institute, and we invite all foremen, fire bosses, shot firers or anybody interested, either on the surface or in the mine. I think at the last meeting we had sixty to seventy men present. We hold meetings once a month; usually on a certain set Tuesday or second Friday of the month, or so on. We have a President, a Vice-President and a Secretary-Treasurer. There are no dues connected with it. We aim to take up the' papers that are presented at the various meetings of the Rocky Mountain Coal Mining Institute, and also any other subject that would be of interest, connected with our own mining operation. We usually ask two or three men to pre- sent papers, rather than one man. We find it difficult in getting one man to work up any subject, but two or three men work up very interesting papers. While we have just recently organized, we aim to have luncheons in connection with it, and possibly once a year a banquet or .some similar activity that we think would interest the men. We feel it is going to be a great help in carrying on the work of the present organization in presenting the activities around the mines. PRESIDENT MOSES: I thank you, Mr. Holman. Has any one any- thing to bring up at this time? MR. LITTLEJOHN: I would like to ask Mr. Holman if the Institute or the Chapter there is confined to Dawson alone, or open to other camps in New Mexico? MR. HOLMAN: At the present, Mr. Littlejohn, it is just confined to our own camp, although we intend to invite the members and the officials of the other camps later on, perhaps. Especially, if we gave a banquet, no doubt we would invite the others. MR. LITTLEJOHN: Is there any other Chapter in New Mexico besides yours in Dawson, Mr. Holman? MR. HOLMAN: None that I know of, right now.

Jan 1, 1926

WILLIAM P BALAZ RMCMI PRESIDENT 1990-1991 on behalf of the RMCMI Board of Directors and Officers of The Rocky Mountain Coal Mining Institute cordially invites you and your family to attend the 87th Regular Meeting and Convention to be held June 30, July 1 & 2, 1991 Keystone Resort, Colorado

Jan 1, 1990

By Kevin Whipkey

How is Improvement Being Achieved ? Section Equipment ?Mine Layout/Projections ? Work Schedule ? Maintenance ? Management

Jan 1, 2005

By Thomas Foster

One of the most dreaded things which mining men sometimes have to contend with is underground mine fires, which are both dangerous and expensive. In the Reliance mines we have had considerable trouble with mine fires. We have at the present time five different fire zones, three of these zones give us considerable trouble and the other two have not given any trouble since they have been walled off. Fire Zone No. 1 comprises No. 2, 3 and 4 South Entries, about 50 acres are enclosed in this zone. Fire Zone No. 2 comprises the main drift entry from the mouth to the Old Boundary Plane and extends to the crop line, about 10 acres are enclosed in this zone. Fire Zone No. 3 comprises 1 and 2 North Entries from the main slope to the Old Boundary Plane, a distance of about 1,200 feet, about 15 acres are enclosed in this zone. Fire Zone No. 4 comprises 11/2 and 2 North Entries, a distance of 1,100 feet between New Slope and Old Boundary Plane, about 15 acres are enclosed in this zone. Fire Zone No. 5 comprises the inside end of No. 11/2 and 2 North Entries and 3 North Entry from the New Slope to 30 room, a distance of about 2,600 feet along No. 3 North Entry, about 20 acres are enclosed in this zone. The first mine fire started in No. 2 South Entry in No. 1 zone in 1914. Inside of No. 7 room on the high side of the entry, there was a soft piece of coal. There were no rooms driven in this coal and one day a fire was discovered in the solid pillar on the high side of the entry, work was started at once to load out this fire. and several places was driven into the pillar and cribs built where the coal was taken out, but this method proved a failure and a sand pack was put up along the entry between the track and the high rib. This consisted of timber set about 3 feet from the rib and 2-inch boards put behind the timber and sand or adobe put in between the boards and the ribs, and this method gave very good results except that it required close watching as the sand would settle and let the smoke out between the roof and the sand. Fire broke out in No. 3 South Entry in No. 1 zone in the summer of 1919. We sealed this fire off by building 36 fire stoppings, which also enclosed the fire in No. 2 South Entry and we have never had any trouble with fires in this zone since it was walled off. The fire started in No. 2 -zone in 1919 and has been very active ever since. When this fire was first discovered we built new stoppings in front of the old one in the room necks; we also opened up some of the room necks and loaded out part of the burning coal and rock but this did not help any, the fire, would burn out around the stoppings also burn along the roof between the top coal and the roof sometimes nearly across the entry. Several holes were drilled from the surface to the fire area and flushing the fire was tried but this was also a:\, failure, the rock above the coal was so hot that the mud would dry in the hole and fill it. In 1921 we started to take down the top coal along this entry, timber the entry and put 2-inch boards behind the timber and fill in between the coal and the boards with sand or adobe. We have at present over 1,000 feet of this work done and it has given us better results than any other method that we have tried. As the coal burns out behind the timber the weight breaks the timber and it is necessary to renew some of it. Fire broke out in No. 1 North Entry in No. 3 zone in 1922. There was a stopping in this entry that had been put in when the entry was finished some few years before. The fire burned around the stopping on the low rib of the entry, we built another stopping in front of the old one taking down the top coal and extending it up to the roof also digging in both ribs and setting the stoppings into the coal about 18 inches. This fire did not cause any trouble until June, 1924, when we discovered this fire was very active on the inside

Jan 1, 1924

By D. A. Stout

The Rouse Mine, belonging to the Colorado Fuel & Iron Company, earlier known as the Santa Clara Mine, is located at Rouse, Huerfano County, Colorado. Operations at this property started about the year 1899, after the old Rouse mine had been drowned out by a large flow of water coming from the strata underlying the Cameron seam. The present new Rouse mine was opened by a slope on what is familiarly known as the Walsen seam in the Walsenburg district. This slope has an average grade of 12 per cent bearing approximately, south 45 degrees west, and having at the present time a total length of 6300 feet. This seam has an average thickness at that property of five and one-half feet; however, there are sections of the mine where the thickness is from seven to eight feet. The mine has been developed. since the time it was opened on what is known as the Room and Pillar system ; water level entries have been driven right and left off the slope, and in some cases the rooms are driven directly up the pitch; and in other cases entries have been driven with rooms turned on water level courses. The first flow of water of which we have ally record was encountered in 1901 in what was called the "Second West Entry." This flow, however, was small, and did not require the installation of any large pump unit. From 1901 up until 1909 the flow increased normally as the field was developed. In January, 1909, the first large inflow occurred, coming from a break in the seventh west entry, making a total flow at that time of about 500 gallons per minute. This necessitated putting in larger pumps, and the first pump to be installed of the centrifugal type was a 600 gallon Worthington. By the year 1911 the water had increased, due to additional development, until it was found necessary to install an additional 600 gallon Worthington centrifugal type pump. In December, 1912, a break occurred in the eighth west entry, between the fourth and sixth cross entries, making 2000 gallons per minute. This flow decreased after a period of three weeks some 500 gallons, but on account of the quantity of water then being handled at the mine, and in view of the fact that we needed some reserve pumping equipment to take care of these flows, and additional 600-gallon Worthington centrifugal type pump was installed in June, 1913. An the latter part of 1914 a 250 gallon Reese roturbo was installed to take care of the water, which was being made in the lower workings of the slope. We found after the installation of the centrifugal pumps that the water decreased to a certain degree in the uppermost workings. This led us to believe that the field was being drained, more or less, and the head reduced ; however, our ideas in regard to this were again upset in December, 1915, when we encountered a flow in room 6 off the first cross entry on the ninth east entry. This flow was not as large as previous flows had been, but made 200 gallons per minute.

Jan 1, 1921