Search Documents

[Allan, Andrew Thompson Creek Coal & Coal Corp., Glenwood Springs, Colo. Allen, Earl W Mine Safety Appliances, 257 Rio Grand St., Salt Lake City, Utah Allen, Louis B C. F. & I. Corp., P.O. Box 1738, Salt Lake City, Utah Allen, Thomas Chief, State Coal Mine Inspector, Colorado, Argonaut Hotel, Denver Ambler, J.B P.O. Box 591, Denver., Colo. Anderson, A. R Jeffrey Mfg. Co., Columbus, Ohio Anderson, Merlynn D U. S. Fuel Co., Hiawatha, Utah Anderson, Nephi W Books Cliffs Coal Co., Dragerton, Utah Arnston, E. K Standard Oil Co., 4601 West 26th Ave., Denver 12, Colo. Audin. Clement, Jr Paonia,Colo.]

Jan 1, 1957

FEBRUARY 26TH. MORNING SESSION: The sixteenth regular meeting of the Rocky Mountain Coal Mining Institute was called to order in one of the private dining rooms of the Albany Hotel, Monday morning, at 11 o'clock, with the President, F. W. Whiteside, in the chair, one hundred and one members being registered. The minutes of the previous meeting were read and approved. The Treasurer reported the finances of the Institute in excellent shape. The President appointed J. B. Marks, J. S. Veach and W. A. Ream as a Resolution Committee, and Frank A. Young, M. B. Urquhart and G. A. Murphy a Nominating Committee. There being no further business the meeting adjourned. AFTERNOON SESSION: The afternoon session was called to order in the Ball Room of the Albany Hotel, with approximately one hundred members present, President Whiteside presiding. A. L. Jones read his paper entitled, "The Power Problem of the Coal Mine," and C. E. Drennan, his paper, "Why Alternating Current." These papers were thoroughly discussed, after which the meeting adjourned. EVENING SESSION: At 6:45 p. m. two hundred and fifty-three members and invited guests met in the Ball Room of the Albany Hotel for the banquet. Harry F. Nash was toastmaster, and George Sanford Holmes the principal speaker. Following Mr. Holmes speech, H. N. Wheeler delivered his humorous oration of the "Annexation of Cuba;" following this certain members of the Institute gave an entertainment depicting a fictitious meeting of the United States Coal Commission. Chester Mott, formerly a member of the Institute wrote the words and songs of the entertainment, and directed it. After the show the assembly enjoyed a dance.

Jan 1, 1923

[Adams, Douglas K General Electric Co., P.O. Box 2331, Denver 1, Colo. Alger, Van Kaiser Steel, Sunnyside, Utah Allan,-Andrew Thompson Creek Coal & Coke Corp., Glenwood Springs, Colo. Allen, Earl W Mine Safety Appliances Co., 257 Rio Grand St., Salt Lake City, Utah Allen, John P Development & Resources Corp., 50 Broadway, N. Y. 4, N. Y. Allen, Thomas Chief State Coal Mine Inspector, State Services Bldg., Denver, Colo. Alston, George L Mine Safety Appliances Co., 201 N. Braddock, Pittsburgh 8, Pa. Anderson, Nephi W Book Cliffs Coal Co., Dragerton, Utah Anderson, W. J Texaco, Inc., 845 N. 5th E., Price, Utah Ankeny, Marling J U. S. Bureau of Mines, 5308 Roosevelt St., Bethesda, Md. Archer, Bryon J., Jr Peabody Coal Co., 421 Glenwood St., Grand Junction, Colo. Arentzen, E. M Lee-Norse Co., Charleroi, Pa. Arentzen, L. E Lee-Norse Co., 2975 18th St., Boulder, Colo. Artis, Cliff E Big Horn Coal Co., 247 Sherman Ave., Sheridan, Wyo. Atchison, Lee Atchison Construction Co., Drawer D, Aztec, N. Mex.]

Jan 1, 1963

By G. A. Murphy

This tipple differs from the ordinary tipple only in that it embodies numerous refinements for grading and otherwise preparing the coal. Coal from the mines is delivered to the tipple over a surface tram. There are two tracks for loads, which will hold about forty cars, and one track for empties which will hold about the same number. The loads are fed to the dump by gravity from both tracks and are controlled by two squeeze blocks. These blocks are of the type originally designed by Mr. W. J. Elwood, but unlike the original blocks which were of wood and operated by hand levers, are built of steel and operated by com¬pressed air at 100 pounds pressure. They are capable of holding securely twenty-four three-ton cars on a grade of 2.5%. The dump is of the complete revolving type and has a capacity of five cars per minute. After being dumped the empty cars go to the usual kick-back and onto the empty track by gravity. The hopper under the dump has a capacity of approximately fifteen tons, and the coal from this hopper is fed to the shakers by a reciprocating feeder. The screens are of the usual shaker type. They are eight feet wide, seventy-two feet long in two sections, balanced, pitch 12° 30", travel six inches and the eccentric shaft makes 100 revolutions per minute. The upper section of the screen is shorter but heavier than the lower section, and contains the slack and nut screens, consisting of plates with 1 5/8" and 3" round perforations respectively. The lower section contains plates with 4 ½ ", 6" and 8" round perforations respectively, from top to bottom in the order named. The shaker is so arranged that nearly all changes for making the different sizes of coal are made by merely shifting levers. The most complicated change has been made in two and a half minutes; most of the other changes can be made in less than one minute and some of then without stopping the shaker. One of the refinements is what we call the degradation screens. Just before the coal leaves the shaker it goes over a screen with 1 3/8" round perforations, which takes out the fine coal made while the coal is going over the other perforations. This fine coal goes into hoppers and onto the degradation conveyor and to the slack chute. The different sizes of coal, excepting the slack, are delivered by the shaker onto three picking tables. These tables are horizontal for twenty-four feet and then hinged to form the loading booms, so that each picking table forms a unit of continuous conveyor. Centrally located under the picking tables and under the floor, is the refuse conveyor which runs at right angles to the tables. The impurities picked from the coal are dropped into openings in the floor and onto this conveyor, from which they are discharged into a bin of 100 tons capacity. From this bin the refuse is loaded into railroad cars through a gate. The slack may be loaded directly into railroad cars through a chute from the hopper under the shaker, or it may be conveyed to the rescreener. Gates are provided by which all or any part of the slack may be loaded either directly into railroad cars or conveyed to the rescreener. The rescreener is a shaker four feet wide with sixteen feet of plate perforated with 3/4" round holes. The framework is wood, the pitch is 5° and it is driven by eccentrics having a 5 3/4" throw running 143 R.P.M. It is hung on 1"x10" ash boards, rigidly fixed at the support and on the shaker, so that the spring of the boards allows for its movement. The eccentric rods are also of ash, rigidly fixed and spring to allow the movement of the eccentrics. The dust going through this shaker drops into a bin of 80 tons capacity and is loaded into railroad cars

Jan 1, 1925

PRESIDENT LITTLEJOHN: Is there any member that has any question to ask Mr. McCleary on the subject? MR. TESCHER: What do you figure it costs to do this? MR. McCLEARY: Between one and a half and one and three-quarters cents per kilowatt hour. MR. TESCHER: That includes all charges? MR. McCLEARY: All charges, fuel and labor. PRESIDENT LITTLEJOHN: Mr. McCleary, you were talking about a ten-inch top on the cars. Don't you find there is considerable spillage when raising or lowering the cars? MR. McCLEARY : Not after the men get accustomed to loading cars properly; at first, they just loaded it on in any old way, but wall it onto the cars solidly after a few days at the mine. I do not think we have that condition now. PRESIDENT LITTLEJOHN: Did I understand from the paper there that the rock dust you are using contains 90 per cent silica? MR. McCLEARY: Twenty; less than twenty. PRESIDENT LITTLEJOHN: I got that figure wrong. Are there any other questions to ask? MR. SCHLOSS: I would like to know what kind of machinery Mr. McCleary is using for rock dusting and are they rock dusting the rooms, or not? MR. McCLEARY: We have only recently started rock dusting, and the machine that we are using is Mr. Tescher's machine. We start in at the face of the main entry and move against the air current rock dusting every room and the entry every 50 feet. Every 50 feet, we stop the machine fifteen or twenty minutes at that point and rock dust up in the room and around the entry at that point. PRESIDENT LITTLEJOHN: Do you do any water sprinkling at the faces-at the working face? MR. McCLEARY: Yes, sir, every working face is sprinkled every day, and at least every two days at all points in the mine. PRESIDENT LITTLEJOHN: Does it affect the rock dust in any way? MR. McCLEARY: That was true before we started rock dusting. The faces only are sprinkled now. PRESIDENT LITTLEJOHN: Where you stop to sprinkle with water, you do not figure on rock dusting? MR. McCLEARY: I will just change that around. Where we do rock dusting, we do not expect to sprinkle. Where the faces of the coal are fresh, from day to day, that is where the sprinkling will be clone. PRESIDENT LITTLEJOHN: That is the fresh faces? MR. McCLEARY: Yes. I might add right here, I believe Mr. Tescher made the statement that cross-cuts up an 8 per cent pitch were the steepest that

Jan 1, 1925

Lloyd W. Ingles, Superintendent, Allen mine, Colorado Fuel and Iron Corporation. Stonewall, Colorado, called the meeting to order at 9:30 a.m. He introduced George C. Trevorrow, Safety Director, Bituminous Coal Operators' Association, Washington, D. C., who spoke on "Recent Developments for Improving Safety in Underground Coal Mines." (Refer to the index for the printed text of this paper.) Following Mr. Trevorrow's paper, James Westfield, U. S. Bureau of Mines, Washington, D. C., spoke briefly to the group or some of the new methods of controlling fire mentioned in Mr. Trevorrow's paper. Mr. Westfield stated that the Foam plug had been used in the Bureau's experimental mine, and was also used in New Mexico, but was not successful in putting out the lire. In a recent fire in Southwest Virginia where 18 men were lost, the foam plug was used after the fire had been burning for about 6 or 7 days. It did have a good effect, but the section had to be finally sealed off. In a fire in Pennsylvania about 2 weeks ago, the foam plug was put into action after about 9 hours. Although the section was finally sealed, managers of the mine credited the foam plug in saving the mine. Mr. Westfield stated that equipment must be at hand when fighting a fire; that time wasted in securing proper equipment may make the difference. Mr. Westfield also stated that as late as 2 months ago, it seemed that a methane monitoring device was as far as 4 or 5 years away. Now it is expected that it may be put in production within the year. Experimental models are in use in Pennsylvania and West Virginia. Mr. Westfield concluded by complimenting Mr. Trevorrow on his excellent paper.

Jan 1, 1960

By Harold J. Rose

It is a real pleasure to attend another meeting of the Institute. This is partly because I am a Westerner by birth and training. As a young man I had personal experience with firing Colorado and Wyoming coals. The coal industry of the United States has done an outstanding job of producing coal. We can all be proud of the industry's record of continuously adopting technical improvements in coal mining. NEED FOR MORE EFFECTIVE COAL MARKETING However, it cannot be said that the industry has done an equally good job of marketing coal. There has been a rapid growth in U. S. population, and an even greater expansion of industrial demands for heat and power. Yet coal consumption for the past several years has been no greater than it was 40 years ago, in 1912 and 1913.

Jan 1, 1954

Pictured on these pages are the seven RMCMI Scholarship Award Winners for the 1987-88 year followed by a brief profile. Six of the winners were present as RMCMI guests at the June convention in Breckenridge, Colorado to receive their recognition plaques at the welcome session held Monday, June 27, 1988. In addition to the plaques, each winner receives $500.00 to be used toward tuition in the coming academic year. Also, as this is a continuing award, the winners from the previous year will also receive an additional $500.00 for tuition use in their senior years provided they have maintained a good academic standing and are recommended by their university. Criteria for these awards is (1) That the award be made in the spring to a sophomore student to be used toward tuition during the junior year. (2) That the recipient be both a U.S. citizen and a resident of the state involved. (3) That the recipient have good academic standing, be pursuing a degree in a mining related field and have an expressed interest in Western coal as a possible career path. The scholarship program was extended in early 1988 to include curricula other than mining department, but in the engineering disciplines, such as geology, mineral processing and metallurgy. Contributions to this worthy project are tax deductible to each individual RMCMI member. Checks payable to RMCMI Scholarship may be mailed to the RMCMI Office at 2700 Youngfield Street, Suite 100 in Lakewood, CO 80215. Profiles of the 1988 winners follow: [ ] Anthony T. Bowler University of Arizona Tucson, Arizona Tony has taken a well balanced curriculum and at the same time maintained significant progress toward a Geological Engineering degree. He is interested in computer science and programs as a hobby He is the master of several computer languages including machine language on different personal computers. [ ] Christopher Taylor Colorado School of Mines Golden, Colorado Before matriculating at Mines, Chris served four years with the U.S. Army Special Forces attaining the rank of sergeant. He is active in the military, serving in the Reserves and R.O.T.C. This duty precluded his attendance at the Breckenridge meeting. He plans to get summer work experience in mining before graduation and is interested in the managerial and technical aspects of the mining business. [ ] Laverne West New Mexico Institute of Mining & Technology Socorro, New Mexico A native American of Laguna/Navajo ethnic origin, Laverne graduated from the Sante Fe Indian School as valedictorian. She served as both secretary and president of the American Indian Science & Engineering Society. She works at the Nevada Test Site with contractors assisting project engineers in a variety of jobs. She plans to earn a dual degree in Mining and Geological Engineering then pursue a Master's degree in Mineral Economics at the University of California at Berkeley. Among her honors are a four year scholarship from Sante Fe Southern Pacific Foundation, a one year scholarship from Mobil Oil Corporation and another from Eastman Kodak.

Jan 1, 1988

The final session of the meeting was preceded by a movie, "Contact That Kills," which was a color film clearly pointing out various causes of electrical accidents in mines and how such accidents could he prevented. This film was made underground and produced by the U. S. Bureau of Mines for use in teaching accident classes. President R. R. Williams, Jr., called the meeting to order and introduced Mr. Leif Arentzen of the Lee-Norse Company, Charleroi, Pennsylvania, who spoke on "Coal Mining in Australia." The text of his address is as follows: "I arrived in Australia in February of this year-my father sent me over there for an installation. He preceded me as he does in most things, and set up a showing of our machine in Australia. We had 200 of the top level coal mining men visit this showing. They were interested in what the Americans are doing and what the American manufacturer had to offer them. Conditions in Australia are very similar to our mining conditions in the United States and they have looked to us, the coal industry in general, because we have the know-how in answering some of their problems. They feel that European methods and their type of machines are too inadequate to cope with their conditions. My visit was to South Wales, 60 miles south of Sidney. Their mining operation resembled mining coal in Florida. The work is on about a 500-ft. elevation about three miles from the ocean and when you turn around and see about 30 miles of beach, it is quite a picture - the Pacific Ocean is so blue. The coal seam is about ten feet of relatively clean coal. Labor relations are very, very taught right now. They are agitated by a strong Communistic influence and their weekly publication is known as the ?Common Cause,? which is against mechanization of coal mines." Mr. Arentzen enlarged on the fact that America was the example they held before them and described the Australian coal men and their character.

Jan 1, 1959

The Bowdil Company Bucyrus-Erie Company Card Corporation The Cincinnati Mine Machinery Co. Coal Age Coal Mining Cobre Tire Cummins Power, Inc. FMC Corporation - MHE Division T. J. Gundlach Machine Division/Rexnord Inc. Imperial Oil and Grease Company Ingersoll-Rand Jeffrey Mining Machinery Division, Dresser Industries Inc. Joy Manufacturing Company K&P Sales Engineers, Inc. Kennametal, Inc. Lively Manufacturing & Equipment Co. Long-Airdox Co. MS A McLanahan Corporation National Mine Service Company Distributor Products Division Page Engineering Plateau Supply, Inc. Plymouth Rubber Company, Inc. Pyramid Parts Div./American Alloy TIC - The Industrial Company Tricon Metals & Services, Inc. Uniroyal, Inc. Utah International Inc.

Jan 1, 1985

The 72nd Regular Meeting of the Rocky Mountain Coal Mining Institute convened at The Mark Conference Center, Lionshead Village, Vail, Colorado, and was in session at 10:00 a.m. Past President Roy Coulson, President Kemmerer Coal Company, Frontier, Wyoming, called the meeting to order. He introduced Robert W. Wilson, President of the Institute 1975-1976. Bob's biography follows: Born August 20, 1923 in Washington, D.C.; P-47 Fighter Pilot for three years with the U.S. Air Corps, flying 101 missions, Discharged October 1945; Married Barbara J. Polley August 1945 in Golden, Colorado; Moved to Colorado in 1948; Parents of two sons, Alan born in 1948 and Russell (deceased); Now residents of Conifer, Colorado and planning retirement on ranch property in Santa Rita, New Mexico; His education consists of Elementary and High School in Arlington, Va.; Two years at Virginia Polytechnic Institute, Blacksburg, Va.; B.S. in Mechanical Engineering, Purdue University, Lafayette, Indiana 1948; Business-Salesman for K&P, Inc. since 1949, President and Owner since 1968; Representatives for T. J. Gundlach Co., Johnson-March Corp., Ramsey Engineering Co., Omni-Lift, Smoot Company, Sweco, Inc. and FMC-Syntron; Member, RMCMI since 1957, Served as Registration Chairman, Reservation Chairman, Member of the Executive Board and Vice President for Colorado; Member, Society Mining Engineers (AIME), Colorado Mining Association, New Mexico Mining Association, Industries for Jefferson County, and Denver Coal Club.

Jan 1, 1976

By C. H. Trik

Any article or discussion on the ventilation of Working Faces under different systems of concentrated mining is of little value to any practical man unless based upon facts gleaned from actual experience, and empirical data on this subject is, to say the least mighty scarce. Of this one thing, however, you can rest assured, the old cry of "no air at the working faces" will have become a thing of the past. No longer will we hear of some operator who has been too eager to get out the coal and who has lost sight of everything else in his mad dash for production, digging himself shut until his airways are mere pin- points and his air current a feeble thing, too weak to combat the high resistance of his restricted mine. A mine operating under one or more of the various systems of concentrated mining should always have plenty of air, for in concentrated mining the tendency is toward greatly reduced mine resistances due to increased sectional areas. It can readily be seen that the tendency is to large, wide areas across the panel and where this is true large volumes and low gauges are the rule, unless inordinate restriction is encountered in the permanent airways, and no operator, far sighted or progressive enough to adopt this system of mining when his conditions permit, would ever allow his main airways both intake and return, to be anything but model courses. As a matter of .fact, we are likely to encounter the opposite of what is usually the case in most mines to day. We are apt to find the air at the working faces sluggish due to the large areas of passage rather than to high resistance. This is combated in. various ways which will be discussed further along in this article. Those companies, of which we have knowledge in this country who, to- day are using any of the new systems of mining, seem to proceed alike in the general method of developing their acreage. Let us assume, for this discussion, the Utah Colorado Coal Corporation is going to open a mine under the new system and their conditions are such as to permit their adopting the simple block system, each face served by a separate machine, each entry having its conveyor to the cars. After the permanent haulage and airways are driven "narrow work" starts to shape the blocks. We are not interested in the length of these "conveyor headings" since we do not need to drive breakthroughs nor build stoppings for ventilation until we have reached their end when we connect them together. We have two methods of sending air to the face of these dead ends. We can laboriously and expeilsively install brattice cloth, as we go, or we can use a small auxiliary blower with canvas tubing to the face. Indeed I may say that one of the great difficulties encountered under the new systems is in the ventilation of these narrow faces. After they have been connected and an air circuit or current established, ventilation becomes plain sailing until the block is worked out. The auxiliary blower when used with flexible canvas tubing, has been found to be the ideal answer to the question of how to ventilate the headings which are anywhere from 100 to 1,000 feet long. These small blowers when properly used, can go a very long way to assist in further reducing the cost of production already assured by the new method of mining. Right angle bends are made by the tubing manufacturers to enable the fan to sit in the fresh air current, yet out of the way of operations and any recirculation is positively avoided by blowing the air around the corner to the face.

Jan 1, 1926

Pictured on these pages are the six RMCMI Scholarship Award Winners for the 1986-87 year followed by a brief profile. Five of the winners were present as RMCMI guests at the June convention at Kalispell to receive their recognition plaques at the welcoming session held Monday, June 30, 1986. In addition to the plaques, each winner will receive $500.00 to be used toward tuition in the coming academic year. Also, as this is a continuing award, the winners from the 1985-86 season, will also receive an additional $500.00 for tuition use in their senior years provided they have maintained a good academic standing. Criteria for these awards is (1) That the award be made in the spring to a sophomore student to be used toward tuition during the junior year. (2) That the recipient be both a U. S. citizen and a resident of the state involved. (3) That the recipient have good academic standing, be pursuing a degree in a mining related field and have an expressed interest in Western coal as a possible career path. Contributions to this worthy project are tax deductible to each individual RMCMI member. Checks payable to RMCMI Scholarship may be mailed to the RMCMI Office at 2700 Youngfield Street, Suite 100 in Lakewood, CO 80215. Profiles of the 1986 winners follow: [ ] ROBERT BAUGHMAN Colorado School of Mines, Golden, Colorado Bob is spending this summer in field camp at the Colorado School of Mines. His hobbies are fly fishing, hunting and photography. After graduation, he "would like to work for a stable mid-sized company and someday work his way into a management position." He is a member of AIME and Sigma Phi Epsilon and plays intramural football and softball. [ ] BRENT LaMOURE Montana College of Mineral Science & Technology, Butte, Montana Brent has a 3 5 grade point average and has completed courses In Mining Engineering, Underground Mining, Rock Fragmentation, Mineralogy and Petrology and Plane Surveying He is "interested in trying to make the mining industry as efficient as possible "

Jan 1, 1986

MR. LITTLEJOHN: Have you any maximum length that you make your dust barriers? What I mean by that is, your entries are 10 feet wide, and I believe if I remember right, in your single track entries you had only one dust barrier to cover the full width of the. entry in your double track entries, I believe you had two-I would like to know, have you any maximum length you make these barriers? MR. CHAS. LEGER, ROYAL FUEL CO., UTAH: It is stated that they shouldn't be over 8 feet long to obtain sensitiveness. If they make them over 8 feet they are not as sensitive as they should be. They should be made short for two reasons in order to keep the sagging out and to make them as sensitive as possible. MR. DAN HARRINGTON, U. S. BUREAU OF MINES: I didn't come here to enter into any extended discussion on rock dusting or to discuss in particular the situation at Dawson. At the February meeting at Denver, we made a complete study of this matter. Since that time a report was completed and reported to the Phelps-Dodge Corporation and Mr. Moorhead probably has a copy of it, which can give you more complete information as to what we found. We found that with the adobe dusting that they have done, they had six miles of entry pretty thoroughly dusted and of all the samples we took, at least 95 percent of them showed that not only the floor but the ribs and roof were in such a condition that an explosion could not originate in any part of this entry. In other words, this entry as it was dusted was absolutely protected from ignition and propagation. The adobe they used was of material that was non-combustible. In most instances there was not more than 3 per cent of moisture in it.

Jan 1, 1924

By William M. Wallace

Mr. Chairman and Gentlemen: The subject, "Shake It for Results," may or may not suggest just what is to be shaken, or just what results are to be obtained. I can assure you that if you are thinking about anything outside the realm of pure mining application you have come to the wrong meeting, and if this be the case, you have come to hear a subject discussed that I am not prepared to undertake-at the moment, at least. At the very beginning of time, results were definitely obtained by shaking. If you will recall, Eve shook a certain tree of forbidden fruit-need I recount to you the results that were, and are still, being credited to that bit of engineering? To get closer to the subject at hand, it is the intent of this paper to touch generally on the shaking, principally the vibratory shaking, of materials on a piece, or pieces, of perforated metal or screen cloth. Through the evolution of such a motion we find that great strides have been made toward a highly efficient "operation which is an essential factor in the mining world of today. The object of the shaking motion is to more efficiently separate one size material from another, according to the openings in the screening medium over which it is passed. Sizing is an important operation in every ore dressing, coal prepara¬tion or other mineral-preparing plant for reducing the product to a form more concentrated or more convenient for utilization than that in which it was mined. In coal preparation, market requirements, convenience, custom, and efficiency in combustion necessitate grading mined coal by sizes. All ore-dressing or coal preparation plants therefore must have what is called screening, sizing, or grading apparatus.

Jan 1, 1941

By Paul Schmechel

This time of year, our lawn is host to goodly numbers of birds - robins, English sparrows, finches of various flavors and some whose names I don't know. We lure them with a feeder in our backyard and I'm sure Patti and I spend several minutes a day watching them through a picture window that overlooks their coming and going. And, while the picture window supplies us with a constantly changing view, it does not treat our winged friends nearly so kindly. You see, at certain times of the day, reflections on our window feed back to our birds a mirror image of the backyard. Lifting off from the bird feeder, they see before them what is behind them. And, not infrequently they fly straight into the window. They stop abruptly, of course. It has to be quite a shock to discover that what is behind you is not the same as what is in front. At this point, I might be tempted to say something about bird brains - except for the fact that we humans also are prone to deceptive images thrown up by the past. Today, I think we hear a great many voices painting past images as they look to the future. We hear that the price of oil soon will rise to its former elevated position; the price of copper will bounce back; a hungry world soon will escalate the demand for food and our agricultural industry will be back in the black. In fact, we can hear hope from many voices telling us that our major resource-rich, basic industries are poised to fly up. I can hope that the voices are right, but I keep thinking that those expressions come from people seeing false images. Most certainly, it is more comfortable to see the past, rather than acknowledge that the world economy is being restructured and that the restructuring is affecting the Rocky Mountain states profoundly and negatively. The worst mistake we could make may be to place too much credence in the images from our past. We can be lulled into a dangerous complacency. What we need is a tighter belt and the will to do some serious bootstrapping. Before proceeding, I would make two points: First, it is not my intent to be a prophet of doom. But I do think we need some healthy doses of realism, if we are to avoid the shock of flying into a false future. Second, by now you have detected that I have choosen to diversify the assignment you handed me on utility diversification. As I proceed, you soon will see that the roots of diversification for many utilities lie in the subject that we ponder now. We could begin in many places, but let's start with energy. It is pervasive in our businesses and industries. We all use it. And, despite conventional economic wisdom, we are using less of it. The price is down, but we have not reverted to our profligate ways. That is true whether you look at the industrial customer or the residential consumer. As a nation and as a people, we have learned to do more work with less energy. A few statistics illustrated the point. If we use 1973 as the base year, energy use in the United States has declined almost I percent. If we examine the year of peak energy use, 1979, the decline approaches 7 percent. Let's look at it another way. In 1973, for every dollar of gross national product, the United States consumed 27,100 Btu of energy. Last year, 1985, the comparable figure was 20,700 Btu - a decline of 24 percent. So, not only are we using less energy, but we are using it more efficiently. Even though the price of energy has declined, we are unlikely to use substand with natural gas and petroleum consumption. Use of natural gas has dropped almost 21 percent since 1973. Petroleum consumption has declined 1 I percent since 1973 and almost 19 percent since 1978, when the U.S. used a record quantity of petroleum. We also know there's been no appreciable change in amounts of oil and gas used since 1981. We weathered both a sharp recession and a healthy recovery without altering the amount of those fuels used. That the use of oil and gas dropped sharply, while the total use of energy merely slumped a bit is easy to explain. The use of coal, nuclear power and hydroelectricity from 1973 through 1985 increased almost 48 percent. Some people will tell you that the large decrease in the price of oil and gas will result in increased demand that will displace coal, nuclear and hydropower. In turn, demand will force the price of oil and gas upward. I doubt it. From the poking around I've done on the subject, I suspect there may be some short-term displacements, but they will be, for the most part, cancelled out by declining use among existing customers. For instance, we all know what has happened in the automotive sector. In 1973, the average U.S. automobile made 13.1 miles to the U.S. gallon of gasoline. In 1984, the most recent available statistic, the average auto made 16.94 miles to the gallon. That's a 19 percent improvement. Because annual miles driven per automobile are essentially unchanged over the period and the number of cars on the road is not increasing, we are witnessing a drop in this segment of the petroleum market. That trend will continue. Now, let's look at energy consumption patterns still another way. Between 1973 and 1985, consumption in the residential and commercial sectors of our economy increased total energy use by 11.2

Jan 1, 1986

The following pages contain valuable information about the products and services offered by our advertisers

Jan 1, 1983

The 77th Regular Meeting of The Rocky Mountain Coal Mining Institute convened at the Marriott's Mark Conference Center, Lionshead Village, Vail, Colorado, and was in session at 10:00 a.m. Past President, Loren V. Linville, District Sales Manager. Industrial Products Division. Uniroyal. Inc., Denver. Colorado, called the meeting to order. He introduced President, Edward F. Ziolkowski, Senior Vice President and General Manager, Energy Development Company, Hanna. Wyoming. A biographical sketch follows: Ed Ziolkowski is a 1953 graduate from the Colorado School of Mines with a degree in Engineer of Mines. His mining career began with Pickands Mathers Company in Gogibic Iron Range in Northern Wisconsin and Michigan. In 1961 he joined Texas Gulf Sulphur Company as Shaft Mining Engineer for their Cane Creek Potash Project near Moab, Utah. After serving as General Mine Foreman. Mine Superintendent and General Superintendent at Cane Creek, he was transferred in 1969 to Green River. Wyoming as Project Manager of Texas Gulf Black's Fork Trona Development. In 1971 he joined Allied Chemical Green River Works, as Resident Manager. In 1972 he joined Energy Development Company, an Iowa Public Service Company Subsidiary, as General Manager of their Coal Development. He currently is Senior Vice President and General Manager of Energy Development Company, and serves on their Board of Directors as well as the Boards of several other subsidiaries. This past April he was elected to Iowa Public Service Company's Board of Directors. Ed, his lovely wife Pat and children live in Hanna, Wyoming. He has been a member of the RMCMI since 1973. Is a staunch supporter of his community and the mining industry.

Jan 1, 1981

The following pages contain valuable information about the products and services offered by our advertisers

Jan 1, 1984

Mr. Robert Von Storch opened the meeting at 9:00 a.m. Mr. Von Storch: As a matter of fact, I am very much surprised to see many of these faces. The way you were acting last night I did not expect to see so many but you are evidently all right, and survived. This morning's session is the ?RESEARCH DEVELOPMENT? theme, and our first speaker- (and we made a little switch) - is Jack Huebler, Associate Director, Research Institute of Gas Technology, Chicago, Ill. The switch is because of a projector problem. Jack Huebler was born in Michigan and received degrees in Chemical Engineering and Mathematics from the University of Michigan in 1941. He joined the Surface Combusion Corp. immediately and was with them for 20 years, rising to the head of research. He took leading roles in the invention and development of many heat using processes involving gas chemistry combustion and metallurgy. The now famous Erie Mining Taconite Pellet Process was one of these. He pioneered in gas carburizing and in the preparation and use of prepared atmospheres. He specialized in the heat transfer aspects of many new industrial metal heating processes. He left Surface 5 years ago to join IGT.

Jan 1, 1966