Search Documents

The tungsten carbide insert bit has probably advanced blasthole drilling more than any other single improvement. Tungsten carbide inserts have longer life, maintain sharper edges, and penetrate faster than hardened steel edge bits. Before the tungsten carbide hit appeared, all-steel bits were used. Even with the new bits, blasthole drilling costs vary with the type of equipment used and its condition; the hole's length and diameter; the rock's texture, hardness, and nature; the operator efficiency. To help reduce drilling costs, the operator should be familiar with the use and care of drill bits. This article provides information about tungsten carbide rock bits used for percussion drilling. Consideration of tungsten carbide rock bits includes looking at bit materials [ ] as well as bit operation and maintenance. Two basic tungsten carbide rock hits are the button bit and the four-wing carbide insert bit. Three common hit-to-drill-steel connections are the bottom drive, tapered drive, and shoulder drive. Bottom drive bits arc typically used for singlepass or longhole drilling, with all percussion drills from handheld sinkers to heavy track drills. Tapered socket bits are available with shallow or deep carhide inserts, for the lowest cost depending on the rock type being drilled. Shoulder drive bits are available in all-steel or carbide insert design.

Jan 12, 1981

By Henry H. Roos

NTRODUCTION In the mining industry, a "drill jumbo" is a drilling unit equipped with one or more rock drills and mounted on a mechanical conveyance. Jumbos range from single¬drill ring drills mounted on simple steel skids to sophisti¬cated multiple-drill units mounted on diesel engine powered carriers and equipped with automatic controls and sound-abatement cabs. Individual types of jumbos usually are designed for specific tasks such as fan drilling in sublevel caving operations. Some units, such as development jumbos, can be utilized for several functions in addition to their normal applications, e.g., for production drilling in room-and-pillar operations, stoping in cut-and-fill mining, etc. Mine operators can purchase individual components from manufacturers, assembling these components into a jumbo suitable for specific conditions. However, this requires that mine personnel have good engineering and mechanical abilities. Although manufacturers of jumbos maintain facilities for designing machines to meet con¬ditions created by new mining methods and unusual ap¬plications, the cost of the engineering and experimental work for new types of jumbos should be evaluated in terms of both costs and benefits; it may be advantageous to plan the mining operation so that existing and proven units can be utilized. GENERAL SELECTION CRITERIA Since the operating conditions vary in underground mines, the design of a jumbo must be selected to cope with the individual characteristics of the mine. The necessary considerations include access space into the working areas, grades expected to be encountered, radii of the curves, ambient temperatures, the characteristics of the rock, the acidity or alkalinity (pH rating) of the mine water, etc. Access to Mine Workings The mine workings must be accessible to the selected jumbo. Frequently, a jumbo must be disassembled at least partially to pass through the mine shafts. There¬fore, a bolted construction allowing disassembly into pieces of suitable size and weight is desirable in most applications. Type of Undercarriage Generally, a crawler-type undercarriage should not be used in trackless mines having acidic mine water. The acidic water causes an electrolytic action between the individual crawler parts and causes rapid corrosion and early failures. Propulsion A two-wheel drive on a pneumatic-tired jumbo is marginal for grades exceeding 12%. A four-wheel drive unit with good weight distribution is capable of operat¬ing on grades of up to 35%. At least 30% of the gross vehicle weight (GVW) should be carried on the steering axle; otherwise, the steering tires may not have sufficient traction on loose road surfaces and may "plow" instead of steer. To assure stable operation in mines with steep grades, the height of the center of gravity of the jumbo should be considered. It should not make the unit prone to rolling over on the steep grades that may be encoun¬tered. Turning Ability In confined working areas, a skid-steering or crawler unit has the best maneuverability. An articulated carrier is preferable when base-rotated parallel booms are being utilized. A rigid-frame jumbo with automotive steering is compact and economical, having lower maintenance requirements than the other two types. However, the turning radius of a rigid-frame unit is wider than either the skid-steering or articulated units, and this wider turning radius may be detrimental in mines with narrow drifts. JUMBO COMPONENTS Rail Undercarriages A mine with a rail-transportation system generally utilizes drill jumbos that are mounted on rail-type under¬carriages. With a light load and good weight distribu¬tion, this carrier may consist of a simple two-axle four-wheel platform onto which the boom-mounting brackets are attached. As the depth of the round and the penetration rates increase, the weight of the equip¬ment installed on the chassis also increases. The greatest problem with a heavy overhung load is balancing the carrier; a three-boom unit may require a substantial amount of counterweighting to maintain an acceptable 70% to 30% axle-load balance. Although lengthening the wheelbase helps balance the unit, a long wheelbase increases the turning radius, often creating problems on curves and sometimes requiring a swivel truck-type chassis. A good rule of thumb for a simple four-wheel undercarriage is to maintain a wheelbase length to track gage-width ratio that does not exceed 2.5 to 1.0. For a larger ratio, a swivel truck should be utilized. Swing-out outriggers or roof jacks help keep a jumbo in place during the drilling cycle. Usually, a rail-mounted jumbo is not self-propelled. Instead, it is maneuvered into place by a locomotive. Occasionally, several headings are being advanced in close proximity, and a self-propelled jumbo is con¬venient. In electrified mines, such a jumbo utilizes conventional battery-powered traction gear; in dieselized mines, hydrostatic drive components offer good flexi¬bility. The tractive power requirements of a typical rail jumbo may be calculated from the formula: HP = [(RR + GR) X Sl/[33,000 X Em X Eh]

Jan 1, 1982

By Pat McLaughlin

Environmental constraints are pushing many operators to change from large rotary blastholes to the smaller diameter holes drilled with down-hole or top-hammer rigs. Productivity improvements over the years with these two drilling techniques has taken some of the bite out of the transition, while improved fragmentation and more uniform muck due to the tighter patterns can help offset increased explosives costs.

Jan 1, 1995

Beall: Mr. Donovan, would you tell me something about your early life, leading up to your going into I he mining industry? Donovan: I was born in St. Charles, Minn., on November 18, 1879. At that time my father was a school teacher, but he later entered the Congregational ministry. He was pastor in several small Minnesota towns, so we moved about quite a bit.

Jan 8, 1966

By José Artur Albano de Guimarães

A temperatura de carregamento do ferro-gusa no convertedor é de suma importância para o acerto do balanço térmico do convertedor. Dessa maneira, o presente trabalho teve como objetivo a proposição de uma equação de modelamento da perda térmica na panela de ferro-gusa da thyssenkrupp CSA com o intuito de prever, com melhor acurácia, a temperatura de carregamento no convertedor. Os resultados encontrados pelo modelo foram comparados com os valores reais de perda térmica na panela e concluiu-se que a equação desenvolvida se mostrou bastante assertiva e abrangente. Foram consideradas novas variáveis nesta abordagem que, até então, não eram utilizadas pelo modelo de perda térmica nas panelas de ferro-gusa da CSA.

Oct 30, 2017

By Izabela Diniz Duarte

Perdas térmicas decorrem do armazenamento do aço líquido em panelas. O controle da temperatura do aço líquido é condição essencial para se obter um produto final de alto nível de qualidade. Este trabalho buscou avaliar a transferência de calor a partir do aço para o refratário da panela e para a camada de escória, utilizando um modelo numérico (Computational Fluid Dynamics). As perdas de calor dão origem a correntes de convecção dentro do banho e a consequência típica desse fenômeno é a estratificação térmica. Foi avaliada a influência de parâmetros tais como espessura da camada de escória, tipo de revestimento refratário e a temperatura de encharque. As perdas térmicas para o refratário lateral e do fundo da panela se mostraram maiores que as perdas térmicas para a camada de escória. Nas condições estudadas a espessura de camada de escória não apresenta influência significativa sobre as perdas, ao contrário do tipo de refratário e temperatura de encharque.

Aug 16, 2017

There is no simple answer to the question, "What is the meaning of life?" The expressions of life are so multiple that life has different meanings for different spheres of thought, such as art, science, or philosophy; and it conveys a different significance to different persons, according to their individual development and interests. Life is complex from a philosophical point of view. The meaning of life is superficially positive and unmistakable only when approached from a mechanistic view- point; namely, that of biology or biochemistry, since these deal with the physicochemical basis of life processes. However, such a purely mechanistic or biochemical approach to the significance of life and the interpretation of man's behavior on the basis of purely physical laws is certain to run into trouble. Similarly, a concentration of effort upon materialistic advances in world progress is extremely dangerous. The possible consequences of splitting the atom, development of guided missiles, and possible bacterial warfare are timely examples. Man becomes more self-reliant as he extends his scientific and technologic discoveries and learns how to shape natural conditions to his own desires. When man will be able to travel to other planets in atomically propelled space ships and destroy whole worlds by pushing a button, a possibility which now seems to be within the realm of the predictable future, he will need the strong-

Jan 1, 1950

By Pollyana de Aragão Trigueiro

A distribuição de soluto durante a solidificação rápida de uma liga Ag-15%massaCu, foi obtida numericamente. No presente trabalho, utilizamos um modelo de difusão de entalpia e concentração médias, proposto anteriormente, para a solidificação de uma gota de liga binária (atomização). Nossos resultados mostram que a refusão da estrutura pode gerar um perfil de microssegregação em ligas solidificadas rapidamente bastante diferente dos que resultam da solidificação perto do equilíbrio.

Aug 7, 2018

By Hongmin Zhu, Guihua Wang, Xiangsheng Wang

"The anode process of carbon electrode in fluoride melt was studied by voltammetry and chronoamperometry. Anode gases were analyzed by gas chromatography on-line during controlled-potential electrolysis. Two peaks were observed on the cyclic voltammograms. According to the results of gas chromatography, the first peak was corresponded to the discharge of residual oxide ions, with the formation of CO and CO2. Discharge of fluoride ions occurred at 4.1 V vs. Li+/Li, and leading to the anode effect. With the occurrence of anode effect, small amount of CF4 was detected. As the potential reached 4.5 V, CF4 and C2F6 gas evolution occurred, and the current increased to form the second peak.1.IntroductionIn the primary production of Aluminum and some rare earth metals like neodymium, a departure from normal cell operation known as anode effect results in the generation of perfluorocarbons (PFCs), which have high global warming potentials [1]. Owing to the pressure of environmental protection, considerable research has been carried out to clarify the mechanism of anode effect and PFC generation of industry and laboratory cells in the aluminum electrolysis system [2-9]. The common result on PFC generation is that the PFCs are emitted from Hall-Heroult cells only when they are on anode effect. In this article, we selected LiF, the main electrolyte for the neodymium electrolysis [10-11], to perform further investigation on the underlying kinetics of PFC generation and the nature of the reactions at the electrode.2. ExperimentalAll experiments were carried out in an alumina tube reactor, which was filled with high purity helium atmosphere. Spectrographic graphite crucibles were used, which played the dual role of molten fluoride container and the counter electrode. Lithium fluoride was analytical grade. The experiments were carried out at 900 °C."

Jan 1, 2011

By Alberto Bruce

El objetivo del estudio repara sobre el equipo, las condiciones del subsuelo necesarias, y la performance obtenida tras perforar con un medio gaseoso un posible yacimiento de petróleo en la costa Norte Peruana. Como consecuencia de dicho proceso, se muestra que la técnica de perforación es superior a la técnica de perforación con lodo, puesto que logra beneficios como una mayor velocidad de penetración, mayor avance por broca, eliminación de costo de materiales por lodo, etc.

Jul 20, 1955

By Patricio Campos

Durante los diez últimos años, la perforación hidráulica ha desplazado al sistema neumático en aplicaciones mineras y obras civiles. En ese sentido, el presente texto describe las ventajas e inconvenientes de este sistema hidráulico como alternativa futura en el campo de la perforación. La aplicación de esta tecnología aumentó la productividad en la perforación de roca y disminuyó a un costo menor de operación que la de perforadora neumática. De forma que se la considerará como proceso obligatorio en breve plazo, al tiempo que mejora el ambiente de trabajo del personal.

May 1, 1982

La exploración y muestreo de los minerales producidos en el área de Marcona, provincia de Nazca, departamento de Ica, se realiza mediante la colección de las partículas resultantes de la perforación, utilizando máquinas tipo Leyner y con taladros de sondaje convenientemente ubicados. Una vez recogidas las partículas y con los datos obtenidos del análisis, se procede a diseñar los planos de muestreo de las secciones mineralizadas y se completan los mapas geológicos de la región. En este aspecto, el objeto de la investigación se centra en el proceso de sondaje, a partir del uso de las unidades perforadoras que buscan una mayor base con relación a su peso y naturaleza, asi como una mayor cantidad de partículas derivadas de la perforación. Producto de estos requerimientos son el camión y dos tractores, los cuales trasladarán en su parte delantera, la máquina perforadora, los motores de operación, y la armazón de su sustentación, mientras que en la parte posterior, está la motocompresora. Finalmente, la evacuación de los productos de la perforación se convierte en el factor determinante del proceso de muestreo puesto que recoge hasta el 96% de las partículas en un colector de polvo.

Jul 20, 1955

By Bember Díaz

El presente texto señala la perforación y disparo como los medios más adecuados para la explotación de la mina Marcona. Los depósitos de mineral de fierro de Marcona se encuentran ubicados en el distrito de Marcona, provincia de Nazca, Ica. Los elementos que se consideran en un banco para la perforación de taladros y voladuras son: el tipo de material que constituye el banco, altura de explotación del banco, talud en la cara libre, dureza del material, el factor de explosivo que se desea usar, incluyendo la fragmentación y el desplazamiento que se quiere obtener, y la profundidad de perforación total, que es la altura de explotación más la sobreperforación necesaria para obtener el nivel del piso deseado. Asimismo, dentro del sistema de voladuras, se emplea el uso de nitrato de amonio mezclado con petróleo residual denominado ANFO, habiéndose obtenido reducción en los costos por tonelada disparada mediante su uso.

Jan 1, 1969

By Raúl Hidalgo

El presente texto busca mejorar las condiciones de trabajo, eficiencia, productividad en las áreas de explotación del yacimiento minero San Vicente a través de un programa de planeamiento de minas donde se optimize la perforación y voladura en las rocas sedimentarias. En ese sentido, se realiza un estudio de mecánica de rocas que permita conocer el dimensionamiento de las excavaciones adecuado a la roca y sistema de explotación como punto inicial para la optimización del sistema de perforación y voladura.

May 1, 1987

By Mario Cedrón

El presente trabajo describe la aplicación de la tecnología de perforación y voladura en túneles con equipo mecanizado, a través del empleo de las técnicas modernas y optimización de recursos, con la finalidad de minimizar los costos de operación en el túnel Intercuencas Salida Chavimochic. Para ello, se diseñó un sistema de operación para la perforación, voladura y evacuación, de forma que exista un equilibrio entre el tiempo de perforación, sobre excavación y fragmentación. Asimismo se describen las características del túnel, la selección del equipo de perforación, explosivo, diseño de la plantilla, sobreexcavación y las estadísticas de los mismos en la excavación.

Apr 1, 1991

By Jorge Díaz A

El presente texto revisa los métodos utilizados en las minas de tajo de abierto como son la perforación, disparo y seguridad y así mejorar los standars y el rendimiento futuro en la industria minera. Respecto al primer método empleado, se analizan los factores que afectan el rendimiento de brocas y cómo dicho factores varían, impidiendo la adaptación de prácticas universales de perforación. Asu vez, estos mismos permiten seleccionar el tipo de broca adecuado y mejorar el máximo rendimiento del mismo. En cuanto la voladura y los explosivos, se revisan las variables fundamentales que ejercen una influencia sobre el resultado de un disparo y así realizar un estudio comparativo de los agentes explosivos en uso, tratando de interpretar el mecanismo de la explosión y a la vez aplicarlo a las diferentes formaciones presentes en Cerro. Finalmente, se describe la organización del sistema de seguridad y las obligaciones de este comité en la industria minera.

Aug 20, 1965

By Robert Dyment

De acuerdo al método tradicional, en la fabricación de alambre para cables telefónicos se utilizan las varillas de cobre, las cuales se estiran a través de aberturas sucesivamente menores, ya que el cobre en sí mismo es altamente abrasivo. Tales aberturas son confeccionadas con material muy duro para evitar el desgaste rápido. En ese sentido, el presente texto señala el uso del diamante como materail en los troqueles del alambre de cobre, dado que es la única sustancia fuerte que lleva el cobre hasta el calibre 42. La preparación de estos troqueles de diamante industrial requiere gran cantidad de tiempo y atención, de modo que el alambre terminado satisfaga la medida de alta calidad que las normas de la BellTelephone requiere.

May 1, 1968

By Mriganabh Choudhury, Sanjoy Bhowmik, Sampat Raj, Vijay Panwar

Tanks play a vital role in Petroleum refineries and Petrochemical complexes by storing Petroleum substances at various stages. The performance of the foundation system of tanks significantly influences their overall performance, which is evaluated during hydro-testing and operational phases. This study focuses on assessing the performance of a large-diameter floating roof tank measuring 92 m in diameter and 20 m in height, which exhibited excessive settlements during hydro-testing due to the presence of organic soil patches. The maximum total settlement observed was 238 mm, surpassing the permissible limit of 150 mm. Additionally, differential settlements at specific locations exceeded the acceptable limit of 1 in 500. A comprehensive performance analysis of the tank's foundation system was conducted, leading to the tank's approval for utilization at 100% capacity. Furthermore, remedial measures were proposed to address the uneven levels at the tank periphery and prevent settlements in the future. This paper highlights the significance of location-specific soil investigation data, critical parameters for tank foundation system selection, detailed performance analysis of tank foundations, and suggested remedial measures for distressed foundations. By addressing these crucial factors, the study enhances the understanding of tank foundation systems, ultimately improving the overall performance and reliability of tanks in Petroleum refineries and Petrochemical complexes. Keywords: Storage tanks, Performance analysis, Hydro-test, settlement, Ground improvement

Oct 7, 2024

By A. Arik

The accurate estimation of mining-block grades continues to be a challenging task for ore reserve practitioners. The estimation method used and the variability of the mineralization in the deposit are two factors that affect the accuracy of the estimates. The objectives of this study are to determine how different estimation methods perform on a given deposit and to determine the impact that the nature of the mineralization has on the results. A comparison of several estimation methods for prediction accuracy is performed based on conditional simulation results.

Jan 1, 2002

By A. Arik

An accurate estimation of mining block grades continues to be a challenging task for ore reserve practitioners. Two of the factors that affect the accuracy of the estimates are the estimation method used and the variability of the mineralization in the deposit. The objectives of the study are twofold: Firstly, to see how different estimation methods perform on a given deposit. Secondly, to determine the impact of particular nature of the mineralization on the results. The comparison of several estimation methods for the prediction accuracy is performed using the conditional simulation results as the basis.

Jan 1, 2000