Search Documents

By R. A. Hodge, J. W. Murray

By an order of the Executive Council of the Provincial Government dated January 18, 1979, a Royal Commission was established under the Public Inquiries Act to: 1) Examine the adequacy of existing Federal and Provincial requirements for the protection of the health and safety of workers associated with exploration, mining and milling of uranium in B.C. and for the protection of the environment and of the public. 2) Receive public input on these matters. 3) Make recommendations for setting and maintaining standards for worker and public safety and for the protection of the environment as a result of the exploration for the mining and milling of uranium ores. At that time,and at the present time in British Columbia, no uranium mines were, or are, in operation. Exploration at a number of sites was under way and one deposit, the Blizzard deposit, with estimated reserves of 1.92 million tonnes containing approximately 4.74 million kilograms of U308 was at an advanced stage of exploration. With our Terms of Reference, and because of the diverse geology of the western Cordillera which could potentially host a broad variety of uranium, deposit types, the Commission was faced with the task of considering environmental and health protection necessary for the potential development of [any] kind of uranium mineralogy situated in [any] of the environments found in British Columbia. Over the past 17 months since that time, much has transpired, culminating in the February 27, 1980 Provincial Government announcement of a seven year moratorium on exploration, mining and processing of uranium coupled with the termination of our Inquiry before completion of the hearings. The Government sebsequently modified its decision to terminate the Commission completely, deciding instead to stop the hearing but allow time for the Commission to gather in the work that had been initiated

Jan 1, 1980

By Robert D. Brown

"All ten Canadian provinces have now tabled their 1981 /82 budgets . Only the provinces of Ontario, Quebec and British Columbia made more than minor modifications to their tax structures, with both Ontario and Quebec imposing major tax increases. In the past year, the federal budget was also released in the spring. Not so this year: we have that to look forward to in the fall!This month, Tax Notes presents a brief summary of the more significant tax changes introduced at the provinciallevels in the last months.Summary of provincial tax rate changesThe tax changes in this year's provincial budgets were both up and down- but there were far more tax increases than tax cuts.At the corporate tax level, two provinces, New Brunswick and British Columbia, increased their general corporate income tax rate; the former by two percentage points and the latter by one percentage point. Quebec, rather unexpectedly, sharply cut its corporate tax rate on business income, but increased some of its other business taxes at the same time. British Columbia reduced its corporate tax rate on small business income by two percentage points and Saskatchewan by one percentage point."

Jan 1, 1981

By Robert B. Parsons

"The annual onslaught of provincial budgets and tax changes is complete, and once again the Canadian taxpayer is being asked to dig deeper into his pocket to fund old and new programs. It is noteworthy that 1987 tax reform promised lower taxes, but a broader fax base. Five years later, we still have the broader tax base, but the lower faxes have gradually crept up to pre-tax reform levels. Surprise! Surprise!IntroductionThe last edition of Tax Notes commented on some important proposals announced in Manitoba's 1992 budget. In this issue, Tax Notes summarizes the 1992 budget proposals of British Columbia, Ontario and Quebec. These budgets reflect the continuing trend of transferring responsibilities and the related costs-from the federal government to the provinces. As well, the budget papers bear witness to the respective governments' political stripes. British Columbia, Ontario and Quebec are seeking higher tax revenues. Only Quebec continues to acknowledge the importance of the mining industry in its annual budget documents."

Jan 1, 1992

By William P. Prof. Blake

WHEN we consider the efforts made in Europe to promote the physical and moral well-being of the working classes, the question is suggested whether in this country, where, theoretically, every man is peculiarly the arbiter of his own destiny, we may not be too prone to expect every man to take care of himself, and neglect to make those provisions for the welfare of the employed, demanded alike by enlightened economy and humanity. In the older countries, where the disproportion between capital and labor is greater, and the working classes are more dependent, their welfare largely occupies the attention of employers. The subject is involved in the problem of the just relations of capital and labor, and we are rapidly approaching the time, if we have not already reached it, when a generous paternal interest in the welfare of the employed should be more generally manifested. It is a subject which is of special importance to mine-owners and engineers in this country, especially to those located in the coal regions. My own attention has been particularly directed to it by a visit made to the Hassard collieries, a few miles from Liege, Belgium, under the direction of M. Andrimont. This celebrated engineer has established a comfortable home for the miners near the mouth of the shaft of the mine. It has been highly successful and beneficent in its results, and may to a great degree be regarded as a, model for such undertakings. It is known as "Hotel Louise," this being the name of Madame d'Andrimont, who laid the corner-stone of the building April 4th, 1871. The structure is of brick, upon three sides of a square, and

Jan 1, 1875

The explosion at Appin Colliery on July 24th, 1979, demonstrated the need for a large scale facility to simulate an underground type explosion and study its effects. The effects of an explosion cannot be established quantitat- ively using small scale models. A gallery was constructed for this purpose at Londonderry Centre and commissioned in Feb- ruary, 1980. It is 50 metres long, 2.7 metres in diameter, capable of withstanding an internal pressure of 210 kPa and is the only facility available for this purpose in Australia. The gallery has provided valuable inform- ation on blast effects of explosions in tunnels and is to be used for testing the performance of explosion arresting devices, further invest- igation of explosion effects, research into basic explosion phenomena and instrumentation development. Additionally, it will provide a demonstration facility for training purposes.

Jan 1, 1981

By Roberto de Moraes

Lunar construction faces unique challenges arising from the nature of regolith and megaregolith. Unlike terrestrial soils shaped by weathering, lunar regolith is composed of angular, poorly sorted particles produced by impacts, with bulk Density, strength, and trafficability varying sharply with depth and terrain. Boulder fields, floaters, and talus aprons add further complexity, disrupting excavation and mobility. Apollo missions documented these conditions through drive-tube samples, trenching, penetrometer data, trafficability tests, and seismic profiling, but the results remained as datasets rather than a unifying classification. This paper introduces the LRC (Lunar Regolith Classification) Framework and the Overconsolidation Ratio applied for the Moon (OCR*), the first contractor-ready system to organize Apollo-derived trends into excavation demand zones (L1–L5). LRC is explicitly a classification, not a stratigraphy: depth ranges are indicative and require in-situ verification before use. Each zone is defined by bulk density and strength ranges, field proxies (bootprints, trench stability, auger torque, seismic contrasts), and corresponding excavation implications. Worked examples from Apollo 15 (mare), Apollo 16 (highlands), and Apollo 17 (pyroclastics and talus) demonstrate how observed data translate into LRC zones. These cases show that LRC captures both systematic depth trends and sharp local heterogeneity. The framework standardizes excavation planning for landing pads, haul roads, berms, foundations, and tunneling trials, while converting floaters from hazards into resources. LRC thus provides a common language for lunar construction. Rooted in Apollo evidence but designed for Artemis verification, it is proposed as a living standard; a reference framework to guide site preparation, excavation, and risk management in the next phase of lunar development.

Feb 22, 2026

Safe, efficient production is a common objective for all large open pit mines. Despite comprehensive policies, procedures and regulations aimed at protecting workers, several people die each year in mining equipment-related collisions. The limited sightlines of heavy equipment operators coupled with difficult operating conditions are major contributing factors to the majority of mining equipment collisions. Off road haul trucks are the most common type of machinery involved in surface accidents. These vehicles represent the primary target for improving safety performance by mine operators. Although several commercial products have been introduced to address these issues, none have achieved significant market acceptance. The current collision avoidance solutions lack integration with onboard fleet management and equipment health systems. To achieve acceptance in industry, any collision avoidance system must offer high reliability, minimal false alarms, and value for money. With these criteria in mind, this paper will examine the pros and cons of the various technological approaches to collision avoidance in an open pit mining environment. The unique global positioning systems (GPS) and camera-based proximity detection solution on offer from Modular Mining Systems will be described. This solution uses intelligent filters to minimise false alarms. Tight integration with fleet management provides context information to enhance warnings and enable back-office near-miss analysis. Available today, this combination creates a practical solution to improve the situational awareness of heavy equipment operators, at a compelling price point. Future directions for maximising heavy equipment operator situational awareness will also be examined.

May 1, 2010

By Lucas van Latum

A Model for Safety Swiss cheese metaphor of safety layers Image »Multiple layers with independent, often transient failure modes »For a loss to occur, all layers must fail independently and simultaneously ??Latent? failures are due to inherent system flaws ??Active? failures are due to unsafe acts

May 1, 2011

By J. P. Ducarme, J. L. Carr, C. C. Jobes

"An average of 1.2 fatalities occur per year in underground coal mines in the United States when a miner is struck or pinned by a remote-controlled continuous mining machine. Proximity detection technology provides a means to prevent these types of accidents by disabling all machine motion when a miner is in close proximity. Researchers at the National Institute for Occupational Safety and Health (NIOSH) have developed the intelligent Proximity Detection (iPD) system, which continuously tracks the position of miners near the machine and disables only those machine motions that could cause a pinning accident. This system, previously demonstrated using non-permissible proximity detection hardware, has now been shown to be effective when implemented using an MSHA-approved system as a platform. Performance tests have shown accuracy, repeatability, and stop zone identification to be comparable to or better than the system demonstrated with non-permissible hardware. INTRODUCTION Underground coal mining room-and-pillar operations typically use Continuous Mining Machines (CMMs), such as the one shown in Figure 1. When CMMs first became available, they were operated from an on-board operator’s compartment that protected operators from roof falls and other hazards but severely restricted visibility and subjected them to machine vibration and high levels of dust and noise. To solve these problems, remote controls were developed to operate CMMs. Now CMM operators are free to position themselves for best visibility of each mining task and are no longer subjected to the rough motion of the CMM during mining operations or the dust and noise generated by the machine. However, this technological advance removed operators from the protection afforded by the operator’s compartment and exposed them to the hazard of being struck or pinned by the CMM or other large moving machines."

Jan 1, 2015

By Donald L. Colwell

THIS is a metallurgical war. More than ever before, the mechanized forces and the air-borne warfare are deciding campaigns. Both of these are primarily dependent upon metals. There are two ways of increasing the effective supply of these metals when the demand is greater than the total over-all supply. The American custom, when a shortage of anything develops, is to get more. In the case of some nonferrous metals this has been done. For example, our potential peak output of magnesium will be almost one hundred times the prewar production. Output of aluminun has also been tremendously increased, and production of other metals is being stimulated by every possible means. Our enemies, however, have another successful method of increasing the effective supply of a material, and that is, to eliminate entirely all nonessential uses, and also to use, in essential applications, alternate materials wherever possible. Sometimes, ersatz material is inferior to the original, and consequently does not do the job as well. Often, however, it has been found superior, and many substitute items are now being used both by industry and by the military which will continue even when the original material again becomes available.

Jan 1, 1943

By Amado Yataco

"El presente texto describe una aproximación sobre la producción de los ocho metales -en tanto determina el Producto Bruto Interno durante el período 2016 en el Perú. Los metales considerados son: cobre, oro, zinc, plata, molibdeno, plomo, hierro y estaño. Asimismo, se muestran cuadros gráficos de la producción de los años 2012 y 2015 para tener series de producción reales y las mejores estimadas del 2016 y 2017. Finalmente se presenta la evolución del PBI en Cerro Verde, Las Bambas y Antamina. "

Dec 1, 2016

By Mariano Iberico Miranda

El presente texto señala el proyecto minero San Marino. Este unidad es propiedad de la Cía. Minera "El barón" y se ubica en el distrito de San Mateo, provincia de Huarochirí, Lima. Asimismo comprende la geología, reservas, sistema de minado (método de explotación, laneamiento Y sistema de minado propuesto.

Sep 1, 1980

By Gustavo Luyo Velit

El presente trabajo describe el programa de exploraciones aplicados en el bloque central Pampahuay del yacimiento carbonífero de Oyón, Lima. El objeto inicial del proyecto fue seleccionar sectores que contengan carbón coquificable y pueda ser explotado de forma planificada, recomendándose la realización de estudios geológicos y mineros de la perforación en los sectores Pampahuay, Gazma, Maray y Parquin. Posteriormente se realizaron otros estudios que permitieron evaluar el yacimiento a partir de tres bloques: Norte (Sector Saquicocha), Central (Sector Pampahuay) y Sur (Sector Cochaquillo - Amazonas), encontrándose que el bloque central reúne mejores condiciones sobre la ubicación del carbón coquificable en volumen industrial. En ese sentido, se sugirió la creación de un programa de exploraciones técnicas en Pampahuay donde se considere la ejecución de labores mineras subterráneas, sondajes diamantinos y la ejecución de pruebas de lavado y coquificación.

Nov 20, 1978

By O. García A

El Complejo minero de Cerro Verde deArequipa se inauguró en 1977, cuya vida estimada era de 16 años. En ese sentido, el presente texto señala la primera y segunda etapa del proyecto minero. La primera etapa comprende la fase de construcción de áreas para la lixiviación y se inician las obras civiles con la construcción del Edificio del Chancador Primario (óxidos). La Segunda Etapa considera la explotación de los sulfuros de Cerro Verde en tres (3) fases modulares, comenzando por 20,000 T.M. de minado diario hasta alcanzar 80,000 T.M. de minado diario .

Jan 1, 1983

By Gerardo Soto M.

El presente texto señala el potencial mineralógica del proyecto minero Cotonga, situada en la provincia de Huari, departamento de Ancash. La investigación comprende la historia del yacimiento, fisiografía, las exploraciones geológicas y geofísicas, el desarrollo en el stock Cotonga, la geología del yacimiento de Contonga, geología estructural, económica, paragénesis y zoneamiento, el sistema de explotación y el funcionamiento de la planta concentradora.

Nov 8, 1984

By Edward Medina Bárcena

Actualmente la minera Atacocha explota minerales polimetálicos a través de dos tipos de relleno: hidraúlico y triturado. Sin embargo, el relleno de estas operaciones de minado se ha modificado, empleándose un nuevo sistema de operaciones mecanizadas. En ese sentido,el objeto del presente trabajo es incrementar la productividad, reducir los costos de relleno, mejorar las condiciones de vida y aumentar la vida económica de los scooptrams a través del sistema de relleno en la operaciones mineras, donde es necesario el traslado de arenas en las colas de las concentradoras ubicadas en Chicrin, zona alta del yacimiento.

Aug 26, 1988

By Ernesto Sirvas Bello

El presente trabajo describe el proceso del proyecto de exploración por cobre y molibdeno en el centro del Perú. Para la aplicación del proyecto se necesita conocer las características geográficas de la zona y así luego señalar la efectividad de los métodos a utilizar. La topografía de la zona comprende sedimentos del Cretásico inferior y medio formados por cuarzitas y calizas, los cuales han sido intruídos por granodioritas que ocupan la parte central e inferior del área. La alteración en la zona estudiada se presenta en forma de sericitación, cloritización, kaolinitización y una débil silicificación. En la intrusiva, de acuerdo al grado de intensidad, se diferenciaron hasta cuatro grados de alteración. La mineralización en las sedimentarias prosiguió al metamorfismo y está formada por tetraedrita, galena, esfalerita y pirita distribuída en una ganga cuarzosa reemplazando capas delgadas de corta corrida. En la intrusiva, la mineralización está formada por molibdenita asociada con pirita, sericita y trazas de chalcopirita presentándose en diseminaciones y en vetillas. De otro lado, el empleo de métodos prospectivos geoquímicos y geofísicos para detallar anomalías en las concentraciones de mineralización, no logró el efecto esperado. Por ello, se utilizaron los procesos geoquímicos seguidos por el cobre y molibdeno, donde no se encontró zona de enriquecimiento secundario para el cobre ni concentraciones importantes de molibdeno.

Aug 20, 1963

By Nestor Chavez, Daniel Alayza

Taucane es un nuevo descubrimiento efectuado por Minsur S.A. en el año 2014, siendo el primer depósito de estaño ligado a mantos y vetas con contenido de sulfuros en Ag-Pb-(Zn-Sn) hospedados en las secuencias sedimentarias calcáreas de la franja morfo-estructural Pre-Cordillera de Carabaya (Puno), y único en su tipo en el sur del Perú.

May 1, 2008

By F. Enrique Toledo

El presente texto señala la aplicación del método Casapalca como técnica empleada en la explotación minera. Este método pertenece al grupo de métodos de "Almacenamiento Transitorio de Mineral con Subnivel de Troceo", donde la caída y extracción del mineral no se efectuará por buzones, sino a través del largo de un subnivel de extracción, desarrollando el espacio suficiente para contener el mineral y dejando el acceso libre para el tránsito. En este sentido, el método simplifica algunos ciclos de operación en el proceso de explotación clásico puesto que elimina los trabajos manuales y es adaptable al uso de la maquinaria moderna en la explotación de yacimientos de baja potencia.

Oct 14, 1980

By José Francisco Carbajal, Juan Carlos Alcas

En Piura, el bosque seco tropical desaparece a un ritmo de 20 mil hectáreas anuales. En respuesta a esta situación, Compañía Minera Miski Mayo desarrolla, desde septiembre de 2012, el “Proyecto de forestación y manejo forestal comunitario de las áreas de la mina de fosfatos Bayóvar”, en el que participan activamente los pobladores del área de influencia, asociaciones de ganaderos y otros actores locales. Este proyecto plantea una intervención integral que permite la forestación y el manejo sostenible de extensiones de bosque seco despoblado, bajo un enfoque que asegura el equilibrio ambiental y el equilibrio económico a través de la generación de cadenas productivas, tanto como la mejora de la calidad de vida mediante la contratación de mano de obra local y el aprovechamiento de los nuevos recursos.

Jul 30, 2019