Search Documents

By Xiaoxu Sun, Jianchao Yao, Jiancheng He, Shijie Lu, Hongxi Zhou

"The ball mill performance relies on impact grinding, but it has disadvantage of the lower efficiency when the ore is finer; while tower mill relies on friction shear affection with high energy efficiency, which is considered to be one of the most potential fine grinding equipment all over the world. Generated by the agitator device, the internal media movement is complex because of comprehensive interaction of screw mechanism, cylinder structure and adjacent media, which is the key factor of grinding process. But the kinematics parameter ,such as speed, acceleration, stress and so on, of media motion cannot be obtained through traditional laboratory test method, which restricts deeply research on finer grinding mechanism seriously. In order to solve this problem, characteristics of media motion in tower mill is studied via the discrete element method. Coefficient of restitution, coefficient of static friction and coefficient of rolling friction are the key parameters affecting the media movement, which were calibrated by stacking angle test firstly. A 3kW tower mill is established as the model for simulation. At last one appropriate simulation strategy is selected to increase simulation accuracy. The characteristic of media motion is obtained based on the computer simulation analysis: macroscopically, the media in tower mill is a dynamic equilibrium state generally accompanied by spiral up and down movement all the time. And it has been found that the maximum lifting height is proportional to the rotation speed of agitator shaft. The velocity of media at the edge of screw stirrer is biggest, while the velocity of media near the cylinder wall is smaller, so the grinding performance between the two ring areas is the best. The rotational speed of agitator shaft and media filling ratio are the two most important operating parameters in tower mill. The impact curve of two main operating parameters on the grinding intensity and energy efficiency are obtained. All these can provide theoretical basis and technical support for operating parameters setting of industrial tower mill."

Jan 1, 2018

By Andersan dos Santos Paula

O objetivo deste trabalho foi avaliar a influência da potência do laser Yb:vidro a fibra, no que diz respeito a extensão dos efeitos estruturais promovido e a possibilidade de corte de uma chapa de NiTi equiatômica austenítica com evidência de encruamento. Após a tentativa de corte a laser, a caracterização foi realizada através de microscopia óptica, microscopia eletrônica de varredura (MEV) / espectroscopia de energia dispersiva de Raios X (EDS) e análise de nanoindentação instrumentada. De acordo com os resultados obtidos pode-se observar que nenhum dos parâmetros de corte a laser usados nos 3 cortes distintos foi suficiente para promover o seccionamento da chapa, bem como revelou evidências de recristalização em conjunto a uma significativa oxidação superficial na zona termicamente afetada.

Aug 16, 2017

By A. R. Rule

As part of the Federal effort to help maintain an adequate supply of fertilizer minerals, the Bureau of Mines is conducting research to characterize complex, low-grade western phosphate rock and to develop methods for economic recovery of phosphate. The rock varies from soft, friable, altered phosphatic shale to hard, tightly cemented, unaltered phosphate rock. To supplement current beneficiation by sizing, a flotation procedure was devised that included depression of phosphate minerals with H2SiF6 and anionic flotation of carbonate minerals, followed immediately by cationic flotation of silicate minerals. Application of the procedure to several different ores resulted in phosphate concentrates that ranged from 28 to 31 pct P20S in grade and from 60 to 70 pct in phosphate recovery.

Jan 1, 1977

By W. C. Hirt

Selective flocculation was used to produce superclean zinc concentrate with minimized silica contamination. Research was carried out on a flotation concentrate from the Jersey Miniere Zinc Company (JMZ) in Gordonsville, Tennessee. The material was first dispersed with sodium silicate and then causticized tapioca starch was used to selectively flocculate the sphalerite, leaving the silica in suspension. This technique has been applied commercially to iron ore beneficiation but has never been used for processing zinc. The feed material assayed 0.45% Si02. Use of 0.56 kg/tonne (1.13 lb/st) of sodium silicate and 0.070 kg/tonne (0.141 lb/st) of causticized tapioca starch resulted in 98.2% zinc recovery in a purified zinc concentrate assaying 66.0% Zn and 0.24% silica. The present target level for silica contamination in JMZ zinc concentrates is 0.3% Si02. This work has shown that selective flocculation offers a potential method for cleaning flotation concentrates, particularly where low silica products are required.

Jan 1, 1993

By C. M. Mason

The current Bureau of Mines active list of permissible explosives includes 95 brands. Twelve are gelatinous and the rest are the more commonly used granular ammonium nitrate type. The list of permissible blasting devices comprises five Cardox models.

Jan 1, 1968

By Klaus M. Hahn, Hermann Wotruba, Bernd G. Friedrich

"Due to an increasing demand for nickel and cobalt and the depletion of nickel sulphide deposits worldwide, the production of ferronickel from lateritic nickel ores becomes more significant. About 60 percent of nickel reserves are present in laterite deposits. Common production methods like acid leaching or smelting operations implicate high material and energy consumption. Physical processing methods are also not efficient, because of the fine microstructural intergrowth of the minerals carrying valuable elements such as nickel and cobalt. Due to the high energy consumption of metallurgical treatment of lateritic nickel ore (nickel grade: 0.8 - 3.0%, Co: 0.05 - 0.15%), the separation of waste material (about 75 - 85%) before the metallurgical treatment is desirable. Therefore, an alternative process has been developed, combining a pyro-metallurgical pre-treatment with selected mechanical processing methods. The developed process consisted of a selective pre-reduction and non-selective segregation of the contained metal phases in the first stage. By this, the properties of the metal carrying minerals were changed and could become subject to concentration by means of fine beneficiation processes afterwards. The parameters of the pre-reduction and segregation were varied and the pre-treated samples were examined concerning their efficiency of metalization grade and metal grain size. This paper describes the investigation of pre-treatment methods of a lateritic nickel ore. The pre-treatment and possible subsequent separation methods were examined with regard to the recovery of the valuable elements. Metalization grade was around 80% for both Ni and Co with metal phase grain sizes below 20 µm. Scanning electron microscopy revealed distribution of new metal phases not only on the reducing agent, but also on the “slag” material.INTRODUCTION Nickel laterites are characterized as strongly weathered regoliths with several zones containing reserves of nickel (Ni) and cobalt (Co). These laterites are formed on serpentinites and ultramafic rocks under climatic and/or tectonic conditions that have changed over time (Butt & Cluzel, 2013). The formation of Ni laterites is influenced by numerous geological and environmental factors. In general, there are three ore types named according to the dominant Ni hosting minerals: oxides, hydrous magnesia (Mg) silicates and clay silicates (Butt & Cluzel, 2013). The most Ni laterite deposits contain two of these ore types, usually an oxide zone and an either clay or Mg silicate zone. Distribution of these principal deposit types, their average Ni-bearing phases and mean Ni grade are shown in Table 1. A schematic profile of the different deposits based on the development on serpentized ultramafic rocks is given in Figure 1 (Butt & Cluzel, 2013)."

Jan 1, 2018

By R M. Smart, A T. Harrison

Backfill systems using unconventional cementitious binders have been successfully used in relatively deep and hard rock tabular mines for longwall, scattered stoping and shaft pillar removals. Two unconventional cementitious systems are discussed: A ground granulated blast furnace slag (GGBS) with an activator containing lime. This has been used with a total tailings æstableÆ slurry at a relatively low dosage of less than seven per cent, by mass, based on dry solids. The room and pillar stopes supported with this fill were up to 20 m high and the tailings were relatively high in pyrite. A GGBS binder plus a silicate based activator and gelling agent that virtually eliminated all water drainage (and hence post filling shrinkage). The system used a slurry, but the addition of the activator created a final placed product that had the behaviour of a paste. The system has been successfully used for almost ten years in the following applications: stoping widths (mining heights) above 1.6 m; and shaft pillar removals in seismically active areas at the end of the life of the shafts. This paper discusses the technical merits and costs of the systems and compares them to other fill systems (including true paste systems). the acceleration (normally g, 9.81m/sec2) is increased to a significantly larger (but generally unmeasured and unknown) value, as shown in Figure 1.

Jan 1, 1998

By Cezar Henrique Gonzalez

Processos de conformação plástica têm sido aplicados nas ligas com memória de forma (LMF) para melhorar suas propriedades mecânicas. No entanto, estes processos provocam alterações das suas propriedades termoelásticas (temperaturas e entalpias de transformação, cargas críticas de indução da martensita, deformação termoelástica reversível e outras). Para aplicações tecnológicas destas ligas, por exemplo como atuadores termomecânicos, elas devem manter suas características constantes ao longo de sua utilização (propriedades termoelásticas). Neste trabalho são analisadas estas propriedades das ligas de Ni-Ti com memória de forma que foram conformadas termomecanicamente pelos processos de laminação convencional e de extrusão angular (Equal Channel Angular Extrusion - ECAE). As analises foram realizadas por calorimetria diferencial de varredura, microscopia eletrônica de varredura e teste de tração sob carga constante (simulação do efeito memória de forma para determinar a propriedades termoelásticas). Os resultados mostraram que os processos de conformação alteram drasticamente as propriedades, principalmente para aquelas amostras submetidas ao ECAE que chegam a bloquear a transformação martensítica. Tratamentos térmicos foram aplicados com o objetivo de melhorar ou restabelecer as propriedades do efeito memória de forma. Resultados das difrações de raios-X e das micrografias indicam que cada tipo de processo de conformação plástica e a formação de precipitados influenciam de forma preponderante nos comportamentos das propriedades termoelásticas. Estas análises são relevantes para aplicações tecnológicas destas ligas, pois requerem boa resistência mecânica combinada com as propriedades funcionais dos fenômenos de memória de forma.

Aug 16, 2017

By Bern Klein, Tichang Sun, Daozhen Gong, University of Science and Technology Beijing, Chunbao Sun, Stefan Nadolski

"This paper is focused on the effect of modifying the SAG mill/ball mill transfer size on the energy efficiency of SABC circuits. The transfer size is considered to be a parameter which provides operators with the opportunity to improve comminution circuit performance. In this study, the Moly-Cop tools package was employed to predict the energy consumption of SAG mill and ball mill circuits under different operating conditions. An Energy Benchmarking model was adopted to calculate grinding energy efficiency. The SABC circuit at the Huckleberry mine was selected for this case study. It was observed that after increasing circuit transfer size (T80) from the existing 3.3 mm to 4.8 mm, the Benchmark Energy Factor (BEF) of the SABC circuit decreased from 4.30 to 4.05. In terms of energy consumption of the SABC circuit, 1.17 kWh/t of specific energy saving was achieved through the transfer size optimization.It was also observed that when a transfer size was selected such that both SAG mill and ball mill circuits operated at their highest energy efficient states, the entire SABC circuit was the most energy efficient. The maximum energy efficiencies of these three circuits were all approximately 25% when compared to the minimum practical energy required to carry out an equivalent comminution duty. Single-particle compression breakage testing was used to determine the minimum practical energy associated with the Huckleberry mill feed. In combination with geo-metallurgical data, this study also provides an opportunity to perform dynamic optimization of SABC circuits."

Jan 1, 2016

By W. J. Wolfe

Using a combined fire assay-atomic absorption method, gold determinations with a minimum detection limit of 5 ppb were made on 345 samples of Early Precambrian felsic plutonic rocks collected 2 2 from intrusions ranging in size from 4 km to 88 km and in composition from syenite to granodiorite. Gold levels in unmineralized stocks are consistently below the 5 ppb detection limit of the analytical method used. In contrast, analyses of samples from stocks containing gold mines within their borders and in nearby metavolcanic-metasedimentary host rocks show a strongly skewed trace element gold population with a substantial percentage of gold values exceeding 5 ppb and ranging as high as 320 ppb. The data indicate that (1) ore-stage hydrothermal metasomatism has produced widespread Au enrichment in Precambrian intrusions that host epigenetic vein-type gold deposits, and (2) geochemical Au analysis of samples collected from 30 to 50 randomly distributed sites can be used to estimate the gold exploration potential of stock-sized bodies and to outline internal patterns of Au variation which may be useful in directing exploration to particular contacts or portions of a stock. The results do not conclusively indicate unusually high Au content in primary unaltered igneous rocks.

Jan 1, 1975

By Tiago Bristt Gonoring

Este trabalho estuda a redução de pós de hematita de alta pureza (com Fe2O3> 99,00% e tamanho de partículas

Aug 1, 2018

By Fabiana da Silva Santos

Neste trabalho foram estudados os efeitos da laminação a frio com baixo percentual de redução e a cinética de recristalização em um aço médio carbono e alto manganês. O aço em estudo foi laminado a frio com percentual de redução de 10%, seguido de um tratamento térmico de recozimento nas temperaturas de 650 e 700°C, em tempos de 10, 15, 20, 25 e 30 minutos. A caracterização microestrutural e avaliação da fração recristalizada foram avaliadas por microscopia óptica e a dureza Vickers (avaliada em um macrodurômetro e um microdurômetro). De acordo com os resultados pode-se observar um efeito combinado de recristalização e crescimento de grão em função da microestrutura parcialmente encruada pelo baixo percentual de redução imposto, que se acentua com aumento do tempo e da temperatura de encharque.

Aug 16, 2017

By Lucas Breder Teixeira

Vasos metalúrgicos podem ser revestidos com linhas de tijolos refratários, com ou sem argamassa. Devido ao grande número de interfaces entre os tijolos, o sub-sistema tijolo/junta impõe dificuldades computacionais ao projeto da montagem. Buscando comparar a influência do projeto refratário nas tensões presentes na estrutura, um revestimento com juntas secas foi modelado utilizando um material homogêneo equivalente. As propriedades termo-mecânicas deste material equivalente foram determinadas usando o método de Homogeneização Periódica e dependem tanto da temperatura quanto do estado da junta (aberta ou fechada, nas duas direções). Este modelo foi usado para simular uma Panela de Aço através do Método dos Elementos Finitos (MEF) com o intuito de demonstrar a influência dos seguintes parâmetros: presença ou ausência de juntas; espessura da junta e projeto refratário. O trabalho pretende auxiliar o desenvolvimento de projetos refratários e fornecer melhores estimativas da aplicabilidade de uma dada configuração.

Oct 30, 2017

By Giulio Antunes de Medeiros, Leonardo Martins Silva, Giselle de Mattos Araújo, Rayla de Souza Caldas

To analyze the direct reduction of self-reducting briquettes producted with different electric arc furnace dust contents, three sets of homogeneous mixtures were produced with elephant grass biomass, iron ore, cement and furnace dust in increasing levels, which were submitted to thermogravimetric tests in muffle furnace and TGA furnace at variable temperatures and times. The curves of degree of reduction were obtained and the reduced briquettes were analyzed by scanning electron microscopy (SEM) and X-ray diffraction (XRD). The results showed that the reducibility of the agglomerates is diminished by the increase of furnace dust, with variations of this result at higher temperatures. The observed microstructures were spherical particles, porous structure or whiskers. Based on XRD results, it was considered probable that the decrease of the degree of reduction with the increase of furnace dust content is related to the reaction between hematite and zincite, which is expected to be controlled by zinc diffusion.

Oct 1, 2019

By Aldo Henrique de Almeida Barbosa

Dentre os revestimentos galvanizados a quente, o galvannealed (GA) destaca-se por possuir uma estrutura composta por fases Fe-Zn, o que lhe confere excelente desempenho na aplicação em peças de alta solicitação. A qualidade do revestimento GA é governada principalmente pelo tratamento de galvanneling, tendo em vista seu efeito na formação dos compostos Fe-Zn. A influência desse tratamento é ainda mais pronunciada em aços com características de bake hardenability (BH), pela presença de elementos que alteram a sua reatividade. Nesse estudo, foram avaliados os efeitos das condições de galvannealing na formação do revestimento GA sobre aços BH. Para tal, ciclos de galvannealing variando-se a temperatura de aquecimento entre 530°C e 580°C foram simulados em escala de laboratório. Além dos ciclos completos, foram também realizadas interrupções do tratamento ao longo da etapa de encharque, através de resfriamentos bruscos das amostras, com o objetivo de avaliar a microestrutura do revestimento ao longo de todo o tratamento. Os resultados permitiram determinar os mecanismos de formação e crescimento dos compostos intermetálicos Fe-Zn que constituem o revestimento galvannealed, e correlacioná-los com as características do produto final, de maneira a estabelecer faixas adequadas de processamento desse material.

Jul 30, 2018

By R. Jacobs, R. E. L. Pobe

The Moab Khotsong Metallurgical Complex comprises a gold recovery circuit (Noligwa Gold Plant) and a uranium recovery circuit (South Uranium Plant). The metallurgical complex employs the reverse leach technology for the recovery of uranium; specifically, uranium extraction prior to gold using acid leaching processing. The inherent uranium species in the ore are uraninite, coffinite and brannerite. The slurry that has been subjected to the uranium leach is further subjected to solid-liquid separation to separate the uranium in a solution through counter-current decantation and the solids (solids carrying all the gold), which are repulped and returned to the gold plant for gold processing. The uranium leaching process is critical to the uranium playing a pivotal role as a value adding by-product to the gold operation. The benefit of adopting this reverse leach process, for improved gold recovery, is that it exposes gold particles occluded within the uranium matrices and avails them for cyanidation. However, the drive for operational efficiency in uranium extraction must be weighed against the incremental operating cost against the backdrop of depressed spot uranium market prices. Over the years, efforts were directed at maintaining the benefit of extracting uranium to enhance gold recovery and simultaneously, optimising the operating cost model for the uranium operation to remain relevant to the gold operation. The aim of this paper and the corresponding presentation is to give an account of the uranium processing optimisation journey embarked on over the years; namely, the operational tradeoffs made in the process of ensuring that uranium continues to add value to the gold operation. These challenges were faced while striking a fine balance between processing cost and operational efficiencies against the prevailing depressed uranium spot market prices. Mineralogical- and laboratory tests conducted form the support basis for the results and observations articulated in the paper. Keywords: By-products, gold extraction, reverse leach benefit, uranium extraction

Jan 1, 2020

By M. Rudolph, R. Tolosana-Delgado, G. van den Boogaart, M. Reuter, U. Peuker

This paper addresses the challenge to define a concept of entropy (state of order) for a textured particle system. Both the particle texture, the intergrowth respectively, and the particle size influence the order of a particle system. The smaller the particles become, the more particles form the solid system and the more permutations of the structure of the particle bed are possible. The texture within a particle is fixed, as long as it is not subjected to changes due to comminution, flocculation or agglomeration. The paper will present a definition of entropy, which is able to reflect qualitatively and quantitatively the intergrowth and the size (distribution) of the particles. Theoretical examples will show how different breakage mechanisms can be identified using the entropy definition. Furthermore, we will define the specifications for data sets to calculate the entropy of a particle system. Keywords: Milling, mineral liberation, intergrowth, statistical entropy, modelling

Jan 1, 2020

By Luiz Gabriel da Silva Nascimento

Foi fabricada uma matriz hipoeutética de Al-2%Ni e adicionado nela concentrações de 0,5; 1,0; e 1,5 % de nanotubos de carbono de paredes múltiplas (NTCPM). A fabricação do material estudado aconteceu por fundição e resfriamento unidirecional brusco originado grãos predominantemente colunares. Os ensaios mecânicos mostram que concentrações maiores de nanotubo na matriz provocam acréscimo na propriedade mecânica e que em áreas mais distante da base extratora de calor a microdureza aumenta. Na amostra que contém 1,5% de nanotubos o valor da microdureza em áreas da posição P1 distante 5 mm da interface metal/molde é aproximadamente de 120 HV, já em áreas da posição P5 distante 45 mm, se aproxima de 210 HV. A resistência a tração é influenciada pela adição de NTC. A matriz possui uma resistência a tração de 64 Mpa, enquanto que a adição de 1,5% de NTC eleva esse valor para 135 MPa.

Aug 17, 2017

By Alessandro Ibarra Mendonça

Embora a metalurgia do pó e o forjamento sejam técnicas totalmente consolidadas no mundo industrializado, surge o forjamento de sinterizados e o sinterforjamento para somar as vantagens de cada processo convencional em uma única técnica de processamento. O presente trabalho propõe a obtenção de uma peça denominada cruzeta, forjada utilizando billet sinterizado como matéria prima. O pó de ferro ASC 100,29 e o grafite UNICARBO 50- fino foram utilizados para obtenção do Billet , através da metalurgia do pó convencional, pressão de 600 MPa, a partir da curva de compressibilidade. Foi escolhida a cruzeta como peça alvo, devido a seu uso na indústria automotiva. A geometria da peça foi modelada em Solidworks e posteriormente realizado o projeto e construção das matrizes para o forjamento. Realizaram-se ensaios de compressão para determinar e analisar a densificação do produto, em função dos fechamentos de poros, do billet sinterizado. Ainda, foram realizados cálculos de volume para determinar a altura do billet necessária para o preenchimento da cavidade da geometria determinada. Confeccionaram-se billet sinterizados a 1150ºC em atmosfera redutora, mantido até 900°C e rapidamente transferida para uma matriz fechada de forjamento para a execução do processo de sinterforjamento a morno. Foram realizados ensaios metalográfico, de dureza e microdureza do billet sinterforjados para validação do processo. Após este processo, obteve-se peças sinterforjadas, onde analisou-se o preenchimento, ausência de dobra e trincas macroscópicas.

Aug 16, 2017

By Lucas Travi

Os problemas gerados no processamento do aço inoxidável AISI 316 são um grande problema do setor metal mecânico, por exemplo, no processo de usinagem, onde o material sofre altas taxas de deformação plástica e elevadas temperaturas na região de contato ferramenta-peça. Além disso, a adesão de aço inoxidável em materiais de maior dureza, no caso a ferramenta, também são problemas enfrentados. Neste trabalho foi feito um estudo qualitativo em escala laboratorial do contato entre um material de maior dureza (aço AISI M2 nitretado a plasma) e o aço AISI 316. Foram realizados ensaios de microdureza Vickers e rugosidade afim de caracterizar as amostras de aço AISI M2. Ensaios tribológicos do tipo Ball-on-Plate foram realizados com a finalidade de determinar o coeficiente de atrito ao longo do tempo para os pares tribológicos formados. Análises feitas via MEV/EDS foram feitas tanto nas trilhas geradas nas superfícies das amostras quanto nas esferas, para detectar pontos de adesão, deformação plástica e transferência de material entre as duas superfícies. Ficou comprovado que a nitretação a plasma com gaiola catódica proporcionou um menor coeficiente de atrito ao longo do tempo quando posta em contato com a esfera de aço inoxidável, bem como foi possível observar a formação de uma menor quantidade de pontos de adesão de aço inoxidável para esta superfície.

Aug 17, 2017