Search Documents

By M. H. Forester

The Bituminous Coal Industry has for the past year been faced with a most serious problem. I am sure that you have had your own individual and local problems, as do we all. In my thirty years of practical experience with coal mining, I have never found an operating man nor a coal mine without problems. The very nature of mining, with so many unknown factors involved, precludes the absence of problems. But they are not insurmountable, and one should not dwell on them interminably. They should be recognized as a challenge to our ability and ingenuity to solve them, and once the proper solution is found, it should be applied and the problem dismissed. However, we find ourselves at the moment in the midst of a serious challenge to our very existence. In the early thirties, many in the industry welcomed the re-establishment of Unionism as a balance wheel, in the belief that the stabilization of wage scales would also stabilize prices and eliminate disastrous price cutting practices. The ultimate effects of having twenty-six years of benevolent paternalism in the administrative branches of Federal and State Governments with their labor courting policies, could hardly have been anticipated. And so with wages spiralling under government sponsorship, we have finally reached the point where competitive fuels, such as natural gas and oil are more attractive to the consumer, from the economic angle of cents per BTU cost, than coal.

Jan 1, 1953

Jan 1, 1924

Jan 1, 2009

Jan 1, 1930

PRESIDENT PRYDE: Any discussion on Mr. Poster's paper? MR. J. BEVAN: I would like to ask the gentleman how fine the dust has to be to cause an explosion? MR. T. FOSTER: According to the Bureau of Mines, it is claimed coal passing through a 100 mesh screen would be considered fine enough. That is all I can learn from the different bulletins. MR. BEVAN: Will the coal dust be that fine; going back in the empty cars on the tipple in the mine? MR. FOSTER: Possibly a great deal of it would be. MR. BEVAN: Will the coal dust be that fine, going back, in the empty the coal dust going back in the cars on the tipple, and into the mine? MR. FOSTER: In some places, they are wetting the cars at the tipple, -in the Rock Springs District, we have as the trip goes out, they have a big pipe, and they souse the car, and wet the load, and in some places, near the timbers; that helps to a certain extent. That does not absolutely eliminate it all, but it helps considerable. MR. WM. LITTLEJOHN (Utah Fuel Company) : I think we have all listened very attentively to the paper that Mr. Foster has just read. He has brought up a subject rather close to my heart, for a long time. He mentions particularly, the Scofield disaster, which happened the first of May, 1900; two hundred men lost their lives in the explosion; and I think it is generally conceded that is about the first time it had ever been brought to the attention of coal miners or operators that such a thing was possible, namely, a purely coal dust explosion. The term "Scofield disaster" is rather a mistake, in a way; while the mine that exploded at the time is in the Scofield District all right, it is now known, and probably was known at that time, as the Winter Quarters Mine, one of the mines which belongs to the Utah Fuel Company at the present time, and did at that time. This mine

Jan 1, 1924

Jan 1, 1929

By T. H. Butler

The two most talked of questions in the mining industry today are rock dusting and mechanical loading. The one as a matter of safety, and the other as a matter of economy, and both are of vital interest to the mining fraternity. Rock dusting and other safety methods will be dealt with by others at this meeting, so I will confine my few remarks to the matter of mechanical loading. I will not attempt to tell you what mechanical loaders are doing in the different mining fields throughout the country, or what they should do, but will endeavor to give you an outline of the work being done with mechanical loaders in No. 4 Mine of the Union Pacific Coal Company, at Hanna, Wye. In order that you may better understand and be in a position to follow me it will be necessary to cite the conditions under which we are working. and the type of loaders in use. The seam pitches from 14 to 17 degrees, and is normally 32 feet in thickness, and is overlaid with a soft sandstone roof. The panel system of working is used, planes being driven on the pitch, and rooms driven on the strike. Owing to faults being encountered planes are driven between the faults, and the. rooms on either side are in some instances 800 to 1,000 feet in depth. Rooms are advanced eight feet in height, and 32 feet in width, by hand loaders and .Toy mechanical loaders, and when driven to the boundary,, 18 feet of the remaining 24 is loaded out with Thew electric shovels, and six feet left to protect the roof. In January, 1916 the company installed a Type 1 Thew shovel, equipped with a 1 1/4-yard dipper, and in July, 1917, they installed a Type 0 Thew electric shovel, equipped with a 1-yard dipper, and in the year 1918 two additional Type 0 Thew shovels, equipped with a 1-yard dipper, were installed, making a total of four Thew shovels for this mine. The introduction of these shovels caused the employees much concern, and like all departures from the old methods of mining, met with indifference by some and open antagonism by others, so that for some time they results obtained were not satisfactory. However, by constant supervision and changes in the method of haulage the results obtained at present, while not entirely satisfactory, are much better and the production and costs are reasonably good. The Thew shovels in use are mounted on traction wheels with swivel axle and move. in all directions by their own power, and while the weight of each is approxi¬mately 20 tons, they are not as cumbersome as. one would think and are easily operated. The system used in working these shovels is to shoot the coal clown ahead of the shovels and maintain two tracks, two cars being used on each track so that shovel is loading on one track while driver is, changing cars on the other. When place is finished the shovel is run back to the first cross-cut by its own power and lowered to the next room with block and tackle, the roof coal in cross-cut being shot down to a height of 16 feet to allow passage of the boom. With better results from the Thew shovels we soon realized that it was necessary to find some method of developing rooms faster than was being done with hand loaders in order to keep the Thew shovels in working places, and in November, 1923, the company purchased from the Joy Machine Company two Type 4 B U Joy loaders, and the installation of same met with the same indifference and antagonism from the employees as did the Thew

Jan 1, 1924

FEBRUARY 26TH. MORNING SESSION: The sixteenth regular meeting of the Rocky Mountain Coal Mining Institute was called to order in one of the private dining rooms of the Albany Hotel, Monday morning, at 11 o'clock, with the President, F. W. Whiteside, in the chair, one hundred and one members being registered. The minutes of the previous meeting were read and approved. The Treasurer reported the finances of the Institute in excellent shape. The President appointed J. B. Marks, J. S. Veach and W. A. Ream as a Resolution Committee, and Frank A. Young, M. B. Urquhart and G. A. Murphy a Nominating Committee. There being no further business the meeting adjourned. AFTERNOON SESSION: The afternoon session was called to order in the Ball Room of the Albany Hotel, with approximately one hundred members present, President Whiteside presiding. A. L. Jones read his paper entitled, "The Power Problem of the Coal Mine," and C. E. Drennan, his paper, "Why Alternating Current." These papers were thoroughly discussed, after which the meeting adjourned. EVENING SESSION: At 6:45 p. m. two hundred and fifty-three members and invited guests met in the Ball Room of the Albany Hotel for the banquet. Harry F. Nash was toastmaster, and George Sanford Holmes the principal speaker. Following Mr. Holmes speech, H. N. Wheeler delivered his humorous oration of the "Annexation of Cuba;" following this certain members of the Institute gave an entertainment depicting a fictitious meeting of the United States Coal Commission. Chester Mott, formerly a member of the Institute wrote the words and songs of the entertainment, and directed it. After the show the assembly enjoyed a dance.

Jan 1, 1923

PRESIDENT WHITESIDE: I am sure we are very grateful indeed for this very interesting talk that Mr. McClure has given us. If anyone has any questions to ask Mr. McClure I am sure he will be glad to answer them at this time. MR. WEITZEL: I want to ask Mr. McClure whether in the instance he described by-passing the drier, whether there was any rest period between the crusher and the furnace, whether the powdered coal that was not dry was allowed to rest in the pipe or was blown directly into combustion chambers. MR. McCLURE: Yes, it moved directly; there might have been some difference had we given it an opportunity to rest. We just had to get in and get out so as not to interfere with operations. MR. WEITZEL: Your idea is, even though you did use a high moisture lignite, you could store it under water if you eliminated surface moisture later. That is a new idea to me; I always had thought that you had to reduce the moisture down under 2 per cent, and to try to store it with anything more than that, any higher moisture, you would have to break the stuff loose again, as it gets so hard it won't move. MR. McCLURE: It might develop I am absolutely wrong; I am just saying what I observed, and I may have had some unusual condition, which I did not detect; something may actually develop which will make my statement of drying lignite entirely wrong. It was quite a surprise to me, surprise to every-

Jan 1, 1923

The 77th Regular Meeting of The Rocky Mountain Coal Mining Institute convened at the Marriott's Mark Conference Center, Lionshead Village, Vail, Colorado, and was in session at 10:00 a.m. Past President, Loren V. Linville, District Sales Manager. Industrial Products Division. Uniroyal. Inc., Denver. Colorado, called the meeting to order. He introduced President, Edward F. Ziolkowski, Senior Vice President and General Manager, Energy Development Company, Hanna. Wyoming. A biographical sketch follows: Ed Ziolkowski is a 1953 graduate from the Colorado School of Mines with a degree in Engineer of Mines. His mining career began with Pickands Mathers Company in Gogibic Iron Range in Northern Wisconsin and Michigan. In 1961 he joined Texas Gulf Sulphur Company as Shaft Mining Engineer for their Cane Creek Potash Project near Moab, Utah. After serving as General Mine Foreman. Mine Superintendent and General Superintendent at Cane Creek, he was transferred in 1969 to Green River. Wyoming as Project Manager of Texas Gulf Black's Fork Trona Development. In 1971 he joined Allied Chemical Green River Works, as Resident Manager. In 1972 he joined Energy Development Company, an Iowa Public Service Company Subsidiary, as General Manager of their Coal Development. He currently is Senior Vice President and General Manager of Energy Development Company, and serves on their Board of Directors as well as the Boards of several other subsidiaries. This past April he was elected to Iowa Public Service Company's Board of Directors. Ed, his lovely wife Pat and children live in Hanna, Wyoming. He has been a member of the RMCMI since 1973. Is a staunch supporter of his community and the mining industry.

Jan 1, 1981

The Wednesday Morning Session of the Rocky Mountain Coal Mining Institute was called to order by Albert Keenan of the Thompson Creek Coal and Coke Company, Denver, Colorado, in the absence of the President. He introduced Edward Prostel of the University of Wyoming Natural Resources Research Institute, Laramie, Wyoming, who spoke on "Coal Utilization Work at the University of Wyoming." (Please refer to the index for printed text of the paper.) Following Mr. Prostel's talk, R. Park Lamborn of the National Mine Service Company, Pittsburgh, Pennsylvania asked Mr. Prostel two questions: (1) What -has been done in tar research? and (2) Has there been large scale research on brickets? Mr. Prostel stated that he could not say too much about the first question as this research was done in the petroleum department and he would prefer to have a chemist talk about it. As to the second question, the system of carbonization is a big project. There are many possibilities. At the University they are trying to do that in the same unit that produces the char. This system was introduced in Canada. The brickets are bound with sulphite liquor. Mr. Schloss asked Mr. Prostel to report on a project that they have been working on at the University, and Mr. Prostel stated that some time ago they began to experiment to see if it would be economically possible to dry coal at the mine (coal containing 30% moisture) and then ship it a distance of 130 miles to be used. Results are that it would be possible, but will require a considerable quantity. He felt it might be possible to operate such a scheme in a few years.

Jan 1, 1957

By Lyman Fearn

Men and institutions are what they are largely because of inheritance. Out of the past comes experience that enables men to build more wisely than did preceding generations. The field of possibilities has widened as the horizon of men's vision has been extended. The realization of these possibilities has depended largely on the application of men's natural endowments, brain and brawn, to the problems at hand. In the field of mechanized mining, Wyoming has a greater percentage of men with vision, who have a realization of the possibilities of mechanized mining, than any other state in proportion to tonnage production. With the introduction of mechanized mining systems have come problems that have caused the men who are connected with the safety work much thought. Discussions on mechanical drilling, cutting, loading, conveying, haulage, etc., have come in for their share of the debate. There have been a few attempts made to show that mechanical mining is safer than are the more primitive ways of doing underground work by man power. We also have a number of places in the coal producing States of the United States, where the mechanized systems have been abandoned chiefly on account of the safety element involved bringing about condemnation of the system by State inspection forces. Certain types of scraper systems have been condemned, and some have voiced opposition to long faces. This would lead us to believe that the question is still a debatable one as far as the safety element is concerned. It is only fair that we discuss the operations of mechanical systems and from the results obtained take analysis of conditions as they exist, basing our conclusions from the results obtained.

Jan 1, 1928

By Douglas Kathol

Coal in the 1990?s Exit of the integrated oil company [Shell Arco Mobil Exxon Mapco Kerr McGee Hansen Nerco Sun] Continued decline in coal prices Significant mergers & acquisitions (M&A) activity ?Most properties traded, some twice ?Significant consolidation ?Massive recapitalization ?New industry leaders ?Frustrated expectations

Jan 1, 2002

By T. C. Harvey

Ladies and Gentlemen: At the request of Mr. J. M. Jennings, chairman of the General Committee on arrangements during the convention of the Rocky Mountain Coal Mining Institute here, I have endeavored to prepare a brief description of the Columbia Steel Corporation's tipple at Columbia, Utah, and its operations, but [ ] from the fact that you have already listened to, and have been interested I'm sure, in the description given by Mr. Jennings and Mr. Murphy, on tipple construction and operations, I am taking the liberty, with your permission, to embody in my paper a description of our haulage and ventilation systems at Columbia, which I hope will be, in a measure, also interesting to you. As many of you know, we are mining on a Multiple Panel System, which while comparatively new in Carbon County, is being used successfully in various mining districts of the United States. Mine The Columbia mine is situated about four miles south of Sunnyside, Utah, at an elevation of 6,760 feet at the portal or main entrance of mine. [ ] From this portal, the main air intake or solid rock tunnel, about 1,600 feet long, runs into the mountain in an easterly direction to an intersection of the coal vein on a grade of 0.5 of one per cent in favor of the loads. There this main entry divides and forms two main entries. These are run in parallel with 100-foot chain pillars between them and protected with 150-foot barrier pillars on each side, and run into the coal in a southerly direction on a 0.5 of one per cent grade in favor of the loads for a dis-

Jan 1, 1925

By L. Ross Weber

Gentlemen and guests of the Rocky Mountain Coal Mining Institute: This is the thirty-second regular meeting of our Institute, and rather than try to make some extemporaneous remarks, I thought it best to write them out, so I could in that way give them to you, and probably give you a new thought for the future conduct of our Institute. The thirty-first regular meeting of the Rocky Mountain Coal Mining Institute was held in Salt Lake City, June 22, 23, and 24, 1932, and due to rapidly changing conditions in the coal industry, subsequent meetings have been postponed from time to time, as many of our members and our Secretary have been tied up with code and labor matters. Since our last meeting, at which was discussed problems of vital interest to all of us, especially the production and marketing of coal safely and economically, and the stabilization of our industry, which has already suffered two years of deplorable conditions, almost two more years have been added to the record, but during the past six months miracles have happened, and an industry which formerly was unable to govern itself, has now, through the aid of our Government, at least learned how to make a proper start in that direction. Whether we like it or not, and whether or not the things being done are in agreement with our various political beliefs, without doubt, we are in a much better position today than prior to this transformation. However, it is a pleasure to all of us to note that safety has not been lost sight of in the interim, and without doubt, as later papers and statistics will substantiate, the period since our last regular meeting has probably shown the most remarkable safety achievement of any period in recent history.

Jan 1, 1934

By Warren C. Bracewell

At your request, am submitting to you several suggestions for the amendment of our safety code which you felt should be kept up to date. These suggestions are the individual opinions of the several members of the Committee who have expressed (heir wishes to me in the form of letters. I am particularly indebted to Mr. Daniel Harrington, Mr. Wm. Littlejohn, Mr. Warren Bracewell, Mr. James Dalrymple and Mr. Hugh McLeod. Would recommend the following amendments Section 1. Wherever practical trolley wires should be securely hung to roof or timbers at a distance of not less than five feet and not more than six and one-half feet above rail and six inches to one side. Spacing of hangers should be from 20 to 25 feet apart. (Adopted.) Section 2. 500 volts D. C. should not be allowed in any installations. Trolley wires should not carry a voltage of more than 250 D. C. nominal voltage. (Referred back.) Pumps, mining machines and other small machinery units where A. C. power is used should not carry a voltage of more than 220. Large units, such as pumps, motor generator sets and hoists, may use a volt- age of 2,200. When power cables to operate same are of armored construction, cables should be securely buried at all crossings, on haulage-ways or where men travel. (Adopted.) Section. 4. Where power lines pass through door frames or stop- pings they should be properly insulated with porcelain compound or rubber tubing. Wherever men get on or off man-trips in vicinity of trolley wires same should be secure1y guarded and should also be protected with a cut- out switch, same to be pulled before men are allowed to get on or off trips. (Adopted.)

Jan 1, 1926

By Thos. A. Stroup

From time to time the question of shearing or vertical cutting of rooms and entries especially as an adjunct to the usual horizontal cuts, has cropped up in the literature of coal mining and in the discussions of mining men. Exact and definite data based an thorough tests have usually been lacking however and the present article is written to supply as far as possible this deficiency. The tests given below were made over a period of 90 days in the summer of 1921 and the object was to investigate the general .economics, if any, that might result from the introduction of vertical cutting as a standard practice into the Clear Creek mines. The machine used was the Oldroyd Universal coal cutter and comparative tests were made against the Goodman Straight- face machine and the 35 B Jeffrey Shortwall. The tests however should be held to apply only to the various methods of cutting and not as a study in the relative merits of the various machines. The first series of tests were made in the 2nd East district of No. 3 mine, where only entries were being driven at the time, the tests therefore cover only entry work. The presumption was that the entry width would be 12 feet but the oxerrun in some cases was marked enough to make the work comparable to rooms. The first test made was to determine the time necessary to shear as well as cut the places, and the results were reduced to the time necessary to cut a ton of coal. The time for shearing in the table includes the time necessary to revolve the cutter bar to the vertical position.

Jan 1, 1924

Jan 1, 1961

Jan 1, 1963

GREETING Hail! Hail! the Coal Miner, Damn the operator, damn the operator, Hail! Hail to mining coal We'll tell 'em how to run the mines. Oh, we'll send out a questionnaire And we'll quiz 'em, we will razz 'em for fair, We'll ask about the profits and order them to stop it Tell the world we're going to stop right there. Hail! Hail! etc. NASH AND PRYDE Tune, "Gallagher and Shean" There are two mining men, the best I've ever spied, One is Mister Harry Nash, the other Mister Pryde. When these two fellows meet it surely is a treat, The things they do, and the things they say, And the funny way they greet. Say, Mister Harry Nash, Oh, Mister Harry Nash, Tell me what's on your mind this evening, Mr. Pryde; I have heard an awful lot of that steep coal mine you got, And I wondered if some one had up and lied. Oh, Mr. Pryde, Oh, Mister Pryde, It's so steep it seems to lie upon its side. If it were steeper than it is, it would put us out of biz, Absolutely, Mister Harry Nash, positively, Mr. Pryde. Oh, Mister Harry Nash, Oh, Mister Harry Nash, Somebody said that at this new mine you've begun 'Fore you mined a lump of coal, had to burrow like a mole, And of rock you dug out many a million ton. Oh, Mister Pryde, Oh, Mister Pryde, I hate to think of all the dough I supplied. I believe the Moffat Tunnel bore won't cost a single dollar more I don't think so Mister Harry Nash, I agree with Mister Pryde. PARTING Tune, "Leave Me With a Smile" Though a sea of strikes and low price squabbles, Follow us the while; Once a year we gather just to show them whether We still wear-a smile; Rocky music coal still packs a barrel full Of timely fun sans guile, Rocky Mountain Institute can follow such And smile its yearly smile.

Jan 1, 1924